×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Weather radio don't want connect

  • Posts: 1185
  • Thank you received: 370
Aaaah, good to hear that it is working fine.

Regarding parking: I'm not the expert, I have only a wooden pole and no dome.

I've written the Observatory tab of EKOS, therefore I know this part quite well. In the Observatory tab, you can configure how the observatory should react upon warnings and alerts including thresholds. If you for example check the "Alerts" checkbox, you can select whether the dome should park after x seconds when the weather status turns to "ALERT".

For parking the scope, you can configure the dome device that the scope should snoop (i.e. listen). There you need to type our rolloff roof device name and select, how the scope should react upon the dome parking/unparking.

But better try it out with the simulators.

And be careful, better try twice :-)

Cheers
Wolfgang
3 years 8 months ago #56547

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
Thank you Wolfgang

I will look that in this week. Also I follow the thread with Christophe to see the policies parking, just as your responses are very good :)

thanks again, it's a very great job!!!
3 years 8 months ago #56580

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
Hi Wolfgang,

I'm update my config indi and the weather radio driver has updated from 1.3 to 1.4.
Before, I could connect my nano in click twice on the connect bouton but now when I clic on connect the driver enter in a loop and don't connect the arduino with the same error time but also it add this text:
[ERROR] Parsing error breaking bad at 0

How I do to retun on the 1.3 please?

thanks a lot

Olivier

PS: for information in my other pc with the driver 1.3 it's OK (with the 2 clic to connect)
Last edit: 3 years 8 months ago by Alonso.
3 years 8 months ago #56601

Please Log in or Create an account to join the conversation.

  • Posts: 1185
  • Thank you received: 370
Hm, strange. Please be so kind and post the logs.
3 years 8 months ago #56616

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
Yes no problem. You cn find the log in attachment.
So, it's strange but:
in version 1.3, I had the same issue with time out but I can to ckicl quicky two times on the connect button.
In the version 1.4 it's a loop which try to connec 3 times and if not responding there is theerror.
I don't knowwhy the arduino don't want to connect instantaneous it's a mystery for me....

File Attachment:

File Name: indi_weath...0947.log
File Size:1 KB
3 years 8 months ago #56627
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
Wolfgang,

for your information, Constant (in the other post) have the same issue with his nano V3.
If I can to help!

Olivier
3 years 8 months ago #56632

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
So, I've tested the firmware with the serial monitor and with the "w" sent command, serial monitor return true for the 3 sensors with associates values (and good values! )
3 years 8 months ago #56637

Please Log in or Create an account to join the conversation.

  • Posts: 1185
  • Thank you received: 370
you are using v1.5 Firmware in combination with v1.4 INDI driver, right? I can check it tomorrow, currently I do not have access to my Arduinos.
3 years 8 months ago #56648

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
Yes it’s that.
Arduino firmware 1.5 with indi driver 1.4.
If you need anything and if I can to help i will do with pleasure.
Have a nice night.

Olivier
3 years 8 months ago #56649

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
Hi Wolfgang,

Do you have good news for us?
:-)
Thanks

Olivier
3 years 8 months ago #56696

Please Log in or Create an account to join the conversation.

  • Posts: 1185
  • Thank you received: 370
Well, the good news is that I can reproduce your problem...
3 years 8 months ago #56701

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
It’s already a good news.
In hope that you will find a fixe :-)
It will be cool for the comunity!
3 years 8 months ago #56702

Please Log in or Create an account to join the conversation.

Time to create page: 1.561 seconds