×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Can I delay the start of capture in the sceduler

  • Posts: 140
  • Thank you received: 1
Hi,

Is there a way I can set a delay in the Scheduler after the Track/Focus/Align/Guide steps but before the start of imaging. The reason is that my mount takes about 15-20 mins to settle down so that my RMS is good enough to start imaging. I can't see a way to do this in the Scheduler module in Ekos.

Rene
2 years 11 months ago #69946

Please Log in or Create an account to join the conversation.

  • Posts: 349
  • Thank you received: 107
Workaround. Place one 15 min throw away job.
2 years 11 months ago #69947

Please Log in or Create an account to join the conversation.

  • Posts: 140
  • Thank you received: 1
Yeah that’s what I was thinking
2 years 11 months ago #69948

Please Log in or Create an account to join the conversation.

  • Posts: 1957
  • Thank you received: 420
Or plan 15 to 20 minutes more for each job. That way, if your mount settles before then you will have additional data to use.
2 years 11 months ago #69949

Please Log in or Create an account to join the conversation.

  • Posts: 140
  • Thank you received: 1
Another good idea but I wish there was a way to set the delay before capture.
2 years 11 months ago #69950

Please Log in or Create an account to join the conversation.

Time to create page: 0.684 seconds