I now have Ekos being found but the port handling has been altered in some fundamental way, I am no longer seeing ttyACM0 or ttyAMA0, just some long string /dev/serial/xxxxxxxxxxxxxxetc
I have enabled auto search but it still does not work.
I finally found that I can manually enter the actual port as /dev/ACMA1, but don't understan what has changed.
Is this a Raspberry Pi OS change or something to do with INDI?

Paul
 

Hi Paul,

Now port assignation is made using the dev/serial/by-id symlinks.

Clear skies

 

So, I can see the links in the directory but it was looking at the wrong one and kept failing because it was already being used.

If I manually set the correct one will this be a permanent thing?

Is there a reason that the scan has stopped working?

Paul

Choose the correct one from your list in indi (if you have multiple serial devices, you wil have a combo list), save your device settings and that's ok.
I have no more connection problems with my serial devices since it was implemented.

I don't know for the scan, sorry!

Clear skies

What's the out for ls -l /dev/serial/by-id/ ?

Jasem,

It seems to be sorted, I have manually added the new link and saved the configuration.
The main problem was I was not expecting it and it defaulted to the wrong link, and the scan did not work.

total 0
lrwxrwxrwx 1 root root 13 May 22 15:25 usb-Arduino__www.arduino.cc__0043_557393232373519131A1-if00 -> ../../ttyACM0
lrwxrwxrwx 1 root root 13 May 22 15:54 usb-NXPbyLosmandy_Gemini_0001A0000000-if00 -> ../../ttyACM1