[ 583.792335] usb 1-1.3: new low-speed USB device number 4 using xhci_hcd
[ 583.931422] usb 1-1.3: New USB device found, idVendor=134a, idProduct=903f, bcdDevice= 0.00
[ 583.931432] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 583.931440] usb 1-1.3: Product: PCFC USB Focuser Controller
[ 583.931447] usb 1-1.3: Manufacturer: JMI Telescopes
[ 583.939532] hid-generic 0003:134A:903F.0002: hiddev96,hidraw0: USB HID v1.11 Device [JMI Telescopes PCFC USB Focuser Controller] on usb-0000:01:00.0-1.3/input0
Raspberry Pi 4b 8GB
JMI Motofocus focus controller
- Followed indilib.org/developers/deveioper-manual/...ent-environment.html to set up the Pi to compile INDI lib on Pi.
- cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Debug ~/Projects/indi ran into following error:
Could NOT find the ogg and theora libraries (missing: OGGTHEORA_ogg_LIBRARY OGGTHEORA_theoraenc_LIBRARY OGGTHEORA_theoradec_LIBRARY OGGTHEORA_ogg_INCLUDE_DIR OGGTHEORA_theora_INCLUDE_DIR) CMake Error at cmake_modules/FindFFTW3.cmake:46 (message): FFTW3 not found. Please install libfftw3-dev
- Used following command to fix it:
sudo apt-get install libfftw3-dev libfftw3-doc
Does the documentation on 'setting development environment' page need to be updated?
While searching on the internet, found that Shoestring Astronomy FCUSB is a similar piece of hardware.
I tried using the Shoestring Astronomy FCUSB driver for the focuser. It resulted in a connection failure.
Can the following change be reviewed and incorporated into the main library by experts so that others can also benefit? Also, it would be helpful to have the standard distribution running on the Pi so that the upgrades are smooth.