×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

FIXED* -DO NOT UPDATE the ESATTO Firmware - FIXED in latest INDI GITHUB release.

  • Posts: 105
  • Thank you received: 23
Hi Jasem, it works now.

Regards,
Camiel
1 year 3 months ago #89170

Please Log in or Create an account to join the conversation.

  • Posts: 34
  • Thank you received: 1
Is there someone who could help aid me in adding these fixes to my Astroberry installation? My Sesto Senso 2 is just sitting there, unused.
1 year 2 months ago #89300

Please Log in or Create an account to join the conversation.

  • Posts: 200
  • Thank you received: 18
How well does the new backlash routine in the firmware work? I’m guessing that one has to quantify the backlash by making small movements until the HFR starts to move having just changed direction and then enter the number of steps it took into the backlash parameter in the indi control panel. Is this correct and having done so will the linear one pass focus routine work? I find it doesn’t with the prior version of the firmware. I’d just jump in and mess with it but I am shipping my Esatto to primalucelab to replace the electronics which failed for no obvious reason.
1 year 2 months ago #89530

Please Log in or Create an account to join the conversation.

  • Posts: 239
  • Thank you received: 38
The way I figure out the backlash setting is bring something into focus more or less.

Use Polynomial focus routine. The focuser will go out 2 times, then go in a few times. I put in a backlash value that lines up the in movement with the two out movements. This may take a few times to get the plots lined up so the backlash is close to the optimal value.

Once you have the back lash setting setup, then you can use any of the other focus methods like Linear 1 pass.
1 year 2 months ago #89531

Please Log in or Create an account to join the conversation.

  • Posts: 239
  • Thank you received: 38
The way I figure out the backlash setting is bring something into focus more or less.

Use Polynomial focus routine. The focuser will go out 2 times, then go in a few times. I put in a backlash value that lines up the in movement with the two out movements. This may take a few times to get the plots lined up so the backlash is close to the optimal value.

Once you have the back lash setting setup, then you can use any of the other focus methods like Linear 1 pass.
1 year 2 months ago #89532

Please Log in or Create an account to join the conversation.

  • Posts: 239
  • Thank you received: 38
The way I figure out the backlash setting is bring something into focus more or less.

Use Polynomial focus routine. The focuser will go out 2 times, then go in a few times. I put in a backlash value that lines up the in movement with the two out movements. This may take a few times to get the plots lined up so the backlash is close to the optimal value.

Once you have the back lash setting setup, then you can use any of the other focus methods like Linear 1 pass.
1 year 2 months ago #89533

Please Log in or Create an account to join the conversation.

  • Posts: 239
  • Thank you received: 38
The way I figure out the backlash setting is bring something into focus more or less.

Use Polynomial focus routine. The focuser will go out 2 times, then go in a few times. I put in a backlash value that lines up the in movement with the two out movements. This may take a few times to get the plots lined up so the backlash is close to the optimal value.

Once you have the back lash setting setup, then you can use any of the other focus methods like Linear 1 pass.
1 year 2 months ago #89534

Please Log in or Create an account to join the conversation.

  • Posts: 239
  • Thank you received: 38
The way I figure out the backlash setting is bring something into focus more or less.

Use Polynomial focus routine. The focuser will go out 2 times, then go in a few times. I put in a backlash value that lines up the in movement with the two out movements. This may take a few times to get the plots lined up so the backlash is close to the optimal value.

Once you have the back lash setting setup, then you can use any of the other focus methods like Linear 1 pass.
1 year 2 months ago #89535

Please Log in or Create an account to join the conversation.

  • Posts: 239
  • Thank you received: 38
The way I figure out the backlash setting is bring something into focus more or less.

Use Polynomial focus routine. The focuser will go out 2 times, then go in a few times. I put in a backlash value that lines up the in movement with the two out movements. This may take a few times to get the plots lined up so the backlash is close to the optimal value.

Once you have the back lash setting setup, then you can use any of the other focus methods like Linear 1 pass.
1 year 2 months ago #89537

Please Log in or Create an account to join the conversation.

  • Posts: 34
  • Thank you received: 1
I still have not managed to implement these changes into my Astrobery installation, and I am therefore considering abandoning Astroberry. Does anyone know if Stellarmate have these changes, or will recieve them soon?

Regards
1 year 2 months ago #89589

Please Log in or Create an account to join the conversation.

  • Posts: 239
  • Thank you received: 38
I believe Stellarmate has these drivers in it's current release.

Astroberry is a different product that is maintained at astroberry.io. I believe they have an update schedule periodically to resync with INDI, but I have no idea what that schedule is.

If you like you can install the old firmware in your Esatto and run it that way until Astroberry updates things.

Sorry, but PrimaLuceLabs changed so much between the old firmware and the new firmware it was hard to keep both compatible in one driver.
1 year 2 months ago #89590

Please Log in or Create an account to join the conversation.

  • Posts: 34
  • Thank you received: 1
Had a go at Stellarmate. Using the Stellarmate software updater did not do the trick though, entering the correct commands into the terminal I finally did manage to get the new drivers and my Sesto Senso 2 seemed to work perfectly. However, in the process something else broke and my imaging camera(ZWO ASI533MC) and guide camera(SVBONY SV305M Pro) stopped working as their drivers instantly crashed upon starting the INDI server in Ekos.

But... The worst part is how horribly slow Stellarmate was to use over VNC compared to using Astroberry over VNC, which is incredibly snappy whereas Stellarmate is more like watching a laggy and non-responsive slideshow.

So, if I could get my Astroberry installation up to snuff, that would be great.

Yeah, I might have to go for downgrading the firmware in my device. Although I would also like to be able to also use my small Windows PC for controlling my gear, and there ASCOM requires the latest firmware on the Sesto Senso 2.

All of this fiddling with different software, drivers and firmware to even get things to work is so incredibly frustrating.
1 year 2 months ago #89591

Please Log in or Create an account to join the conversation.

Time to create page: 1.064 seconds