Hi again,

By the way, maybe could be a good idea add refocus feature based on temperature changes. I have at least two sensor in my gear: the one from Sesto Senso and the one from PPB from Pegasus Software...

Also some "temperature offset calibration" would be helpful to unify all temperature readings from the sensors...

Thanks

Paco L.

I will add this when I push the 1.4 version.

Thank you very much.

I have the original probe for the Sesto Senso. I agree that it is a bit overpriced but it is delivering very reasonable temperature values. The major downside for me is the long cable (~1m). I had to wrap it around my scope several times to get out of the way.

Great!!!

Hi all,

Apologies for hijacking the thread.

I have an issue with my Sesto which only manifests in Ekos. The problem I have is that no matter which direction I tell it to focus, it will always travel in. Never out.

I’m running on Win 7, latest stable SM build 1.4.0 and latest Kstars build.

Hopefully someone can help.

Thanks in advance.

If you download the nightly build you will get version 1.3 of the driver that solves this problem. Please read the last 3 pages of this thread for the details.

Thanks for that.

I'm a non-techie so can I ask for a link to the file and instructions?

R

To switch to the Beta Channel (latest nightly builds) follow these instructions: www.stellarmate.com/support.html?view=kb&kbartid=5.

Make sure that you have calibrated your Sesto Senso with the PrimaLuceLab software. When you have started Ekos look at the INDI Control Panel that the Sesto Senso driver is version 1.3. Then you can go to an absolute position, focus in or out. But do not set the maximum position in INDI. This should work with the next version of the driver (1.4). Rishi is working on that.

Awesome. Thanks. I'll give it a go tonight.

R

@Rishi:

Are you sure that temperature issue has been solved in version 1.3? Mine is still not working the right way... SentoSenso read the temperature when started but nothing changes if I heat it with my hands (to test).

Thanks!

Paco L.

Hi Paco,

my understanding is that it will be solved with version 1.4. With version 1.3 it does not work.

The temperature issue is not solved in 1.3. I will include it when I publish 1.4.
Unless there is a very urgent need I don't want to generate another version with only the temperature issue solved.
I have a long weekend coming up so I hope to get 1.4 out by the end of the weekend.