×
INDI Library v1.8.5 Released (19 Apr 2020)

April 2020 release of INDI Library v1.8.5 introduces new drivers while providing fixes and improvements to existing devices and core framework.

INDI focuser driver for Pololu Tic Stepper Motor Controller via USB interface

6 months 1 week ago
fmalterre
Junior Boarder
Junior Boarder
Posts: 22
More
INDI focuser driver for Pololu Tic Stepper Motor Controller via USB interface #46242
Also I forgot to mention that it works perfectly using usb.

Please Log in or Create an account to join the conversation.

6 months 1 week ago
PDB
Expert Boarder
Expert Boarder
Posts: 114
More
INDI focuser driver for Pololu Tic Stepper Motor Controller via USB interface #46252
Hello Helge,

see you have been busy. Had a look at your code, and it looks ok. Shortly after your first tic-driver I also started on an USB version. I have it running but nver published it because I coukd not find a good way to "remember" the position when device is powered down. (TIC resets to 0 when power is off , buf remembers when you reconnect without power has been off) It worked ok, and I use it on 1 system, but never really finished it. (Also have an unfinished ASCOM version, not ready for publication. That was more difficult because there was no SDK for windows)

Regards,

Paul

Please Log in or Create an account to join the conversation.

6 months 1 week ago
fmalterre
Junior Boarder
Junior Boarder
Posts: 22
More
INDI focuser driver for Pololu Tic Stepper Motor Controller via USB interface #46370
Hi there !

So using usb is fine, but I'm not able to have the BT working on my Asus Tinker board running armbian. It seems that RFCOMM is not available. I tryed to build a new kernel with the proper options, but it seems building a new kernel is not so straightforward :-(
So I think It will stick to the usb version.

Please Log in or Create an account to join the conversation.

6 months 4 days ago
HelgeMK
Gold Boarder
Gold Boarder
Posts: 307
Karma: 1
More
Topic Author
INDI focuser driver for Pololu Tic Stepper Motor Controller via USB interface #46439
Hi Franck, hi Paul,

thanks for the updates - it is a while ago since I was using the driver / focuser. I have to admit that I got frustrated with the mechanical part of the focuses and removed all parts that I do not really need from the scope... one day I will give it another try! :-)

Best, Helge

Please Log in or Create an account to join the conversation.

5 months 3 weeks ago
dolguldur
Senior Boarder
Senior Boarder
Posts: 73
More
INDI focuser driver for Pololu Tic Stepper Motor Controller via USB interface #46769
I am about to get my hands back on my autofocus project with this pololu module. I was wondering if the driver had the following capabilities:
- homing command with the additional homing sensor
-Ability to keep track of the last position in step after a system shutdown.

Than you in advance for your help

Please Log in or Create an account to join the conversation.

Time to create page: 0.471 seconds