I use the Sesto Sense 2 focuser by Prima Luce Labs which works excellent in general. The only small bug in the driver is, that it drives the focuser to the 0 position when shutting down the driver. The actual position and previous focus position are saved, but when switching on again, the focuser remains in the 0 position and you need to manually bring it to the (saved) previously used focus position.
Can you please implement in the driver, that either it does not move the focuser when switching off or brings it back to the old poison when switching on?
Thanks in advance
Amin
Skywatcher Newton 200/1000, Sharpstar 60ED, Canon Lenses
Skywatcherr EQ-6 R, AZ-GTI
StellarMate @ Raspberry Pi 3B+
ASI 183 MC Pro
ASI 290 MC guiding cam on APM 60 ImageMaster
Sesto Senso 2 Focuser + Astromechanics Canon Focuser
Ah thanks a lot, Jasem, I will have a look at that then.
Skywatcher Newton 200/1000, Sharpstar 60ED, Canon Lenses
Skywatcherr EQ-6 R, AZ-GTI
StellarMate @ Raspberry Pi 3B+
ASI 183 MC Pro
ASI 290 MC guiding cam on APM 60 ImageMaster
Sesto Senso 2 Focuser + Astromechanics Canon Focuser