Are you saying following both those links will install everything needed to install INDI/EKOS/KSTARS, etc. and have the results ready to have PHD2 running as well? I think that's what some are requesting? The link also takes you "half way" down the instruction list vs. starting at the top.. I wasn't sure if that was the "actual" starting point for getting it installed..
@ Jay S - absolutely second that plea for a simple install of all working drivers.
@ nou = I have in some despair and despite the clear indications in the README's that single driver installation is not only possible but preferable, attempted to build all the drivers, after installing Indi-Core and all the prerequsites, The build fails with numerous requests to install individual drivers again before attempting to make. There are no instrucfions as to how to install anything before make.
None of these failed drivers are required for anything I want to use.
Again, can I request some assistance in building one or two single drivers, with associated libraries, and installing. Jasem said 'its not complicated' and referred again to his README tutorials, These are complicated by addressing in parallel (apparently) different ways of building the libraries, so that no one method is laid out end to end. For instance, it is not clear whether there is actually a requirement for Iibindi-dev, or whether this is an extra (purpose not specified) or whether it is a useful short-cut when installing a single driver. There is even a suggestion in this thread that that is the only library which is required for building all the drivers.
To a newbie, this is complicated, and I agree it should not be.
It would be extremely helpful if someone could lay out all the steps, from absolute zero, necessary to install one driver and associated libraries. I don't expect this to require only one library. IF (to anticipate an objection) the libraries required depend on what sort of driver is to be installed, then of course it makes sense to install all of them. Or (for instance, I am making this up) to install a camera driver it may always be necessary to install gphoto. But not for a mount. Etc..
AND, as a Debian (Raspberry OS) user, it would be even more helpful if all these could be installed with sudo apt-get.
$ ~/Projects/build/libasi $ mkdir -p ~/Projects/build/indi-asi
$ ~/Projects/build/libasi $ cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Debug ~/Projects/indi-3rdparty/indi-asi
CMake Error: The source "/home/pi/Projects/indi-3rdparty/indi-asi/CMakeLists.txt" does not match the source "/home/pi/Projects/indi-3rdparty/libasi/CMakeLists.txt" used to generate cache. Re-run cmake with a different source directory.
It seems you are trying to use the build directory you used (successfully...) for libasi to also make indi-asi. Did you neglect to 'cd ~/Projects/build/indi-asi' after you created the directory in the first command, there?
I may have failed to change to the correct build directory. I tried again and this time got build errors relating to various properties not being defined or declared. I have the whole output if anyone is interested.
Then looked inside the repository, found indi-asi folder and the readme.md inside it which gave instructions for building the driver by itself. Tried these, they gave the same / similar errors.
So now I will try the scripts to which Nou refers, however, I will not be doing this on a clean image, because I have a pile of other things installed including CdCiel/CCDCiel, ASTAP (thanks to HAN who has recompiled this to work with Raspberry64 - see his Sourceforge page) and so forth.
Many thanks.. I just did a fresh 64 bit build last night and am at the latest (with updates) from the Raspberry Pi site.. Will try running the scripts today. Which is "better". Stable or latest? The Latest mentions auto-detect of cores? Will let everyone know how it goes. SkyX and SkyX LTI 64 bit are already installed..
That text is just last commit message that modified file. Both script automatically use number of cores. Stable script build last released version of INDI and KStars. I update it regullary to reflect this. You can get latest version of script by running
git pull origin
in directory with scripts.
Latest script build latest code from git repositories. This can fail as sometimes there are code error that prevent compilation or they can be unstable so use it only if you need to test really latest code.
If you just download script then you need add excutable permission to script by running
./install-dependencies.sh: line1: syntax error near unexpected token 'newline'
,/install-dependencies.sh line 1: '<!DOCTYPE html>'
I don'f feel that cloning the repo would have any different effect than downloading the script.
And your post seems to suggest that we should run the cloned script in that way.
The problem seems to be that bash doesn't like the "looks-like-might be-html" script ... but as I said above I have never come across this before so I'm guessing.