×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Is INDI ready for Ubuntu 22.04?

  • Posts: 5
  • Thank you received: 1
KStars 3.5.9 Stable installed on Ubuntu 22.04. All drivers available, including eqmod and ZWO ASI. Thank you!
The following user(s) said Thank You: Tim
1 year 10 months ago #83083

Please Log in or Create an account to join the conversation.

  • Posts: 300
  • Thank you received: 57
I have just installed ubuntu 22.04 on a pi4, and confirm that stars 3.5.9 stable installs perfectly from the ppa.

Good news! The performance of stars and ekos under Gnome in jammy seems noticeably more snappy than in 20.04. I haven't tried an actual imaging session yet, but this is really an improvement.
1 year 10 months ago #83090

Please Log in or Create an account to join the conversation.

  • Posts: 16
  • Thank you received: 1
Confirmed....installing fine on 22.04 LTS (kubuntu) now. already had kstars and indi-bin working fine as I'm connecting to a rPi that hasn't been updated... yet... but just installed indi-full on my pc with no conflicts or dependency issues whatsoever. Now i can connect my additional equipment to my pc too. Thanks Jasem and anyone else who sorted this for us all. :-)
1 year 10 months ago #83106

Please Log in or Create an account to join the conversation.

  • Posts: 14
  • Thank you received: 1
Confirmed all working from ppa Xubuntu 22.04
1 year 10 months ago #83108

Please Log in or Create an account to join the conversation.

  • Posts: 4
  • Thank you received: 1

Replied by Tom on topic Is INDI ready for Ubuntu 22.04?

I must be a little thick today as I still cannot get this to install on 22.04.

I am using these steps:
sudo add-apt-repository ppa:mutlaqja/ppa
sudo apt update
sudo apt install indi-full kstars-bleeding

That gives the warning of unmet packages.....Unable to correct problems, you have held broken packages.

What am I missing?

Tom
1 year 10 months ago #83114

Please Log in or Create an account to join the conversation.

  • Posts: 300
  • Thank you received: 57
Because of previous failed install attempts, I had to start with

sudo apt update --fix-missing
sudo dpkg --configure -a

Then the exact steps you did worked for me.
1 year 10 months ago #83118

Please Log in or Create an account to join the conversation.

  • Posts: 4
  • Thank you received: 1

Replied by Tom on topic Is INDI ready for Ubuntu 22.04?

Thank you for that tip.

However that didn't fix the issue. I'm still getting the same unmet dependencies / broken packages message.
1 year 10 months ago #83119

Please Log in or Create an account to join the conversation.

  • Posts: 43
  • Thank you received: 4
Confirmed all working on Ubuntu Mate 22.04
1 year 10 months ago #83125

Please Log in or Create an account to join the conversation.

  • Posts: 43
  • Thank you received: 4
If you had the Ubuntu official indi installed before, you should remove them ALL first.
Some packages without 'indi' prefix should be removed like:
sudo dpkg --remove libplayeronecamera2
sudo dpkg --remove libfishcamp1

Then do:
sudo apt --fix-broken install
1 year 10 months ago #83137

Please Log in or Create an account to join the conversation.

  • Posts: 4
  • Thank you received: 1

Replied by Tom on topic Is INDI ready for Ubuntu 22.04?

Thanks for the suggestions. Alas they didn't work.

As this is a new install, not yet a production machine, I just started over and did a clean install of Ubuntu 22.04.

After performing all Ubuntu updates, Kstars installed fine. Phht, go figure.

Thanks again for the help.

Tom
1 year 10 months ago #83145

Please Log in or Create an account to join the conversation.

  • Posts: 5
  • Thank you received: 1
LATER EDIT: FIXED
sudo apt-get remove brltty
then do a restart for good measure.

ORIGINAL POST
Spoke too soon, seems there is a problem with the eqmod driver or the kernel driver for serial, my HEQ5 mount no longer connects to INDI via FTDI cable. Had to resort to my windows setup last night (the mount worked there).
Here's some context:

dmesg
[ 5284.449239] usb 2-1: new full-speed USB device number 8 using xhci_hcd
[ 5284.604045] usb 2-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ 5284.604059] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5284.604065] usb 2-1: Product: FT232R USB UART
[ 5284.604069] usb 2-1: Manufacturer: FTDI
[ 5284.604073] usb 2-1: SerialNumber: AR0JVCUB
[ 5284.610239] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
[ 5284.610308] usb 2-1: Detected FT232RL
[ 5284.610952] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 5289.155968] usb 2-1: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
[ 5289.157525] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 5289.157590] ftdi_sio 2-1:1.0: device disconnected

Here's the Ekos log for the mount, seems to only find my laptops' 4G Modem:
2022-05-28T09:41:35: [INFO] Scan complete. Found 1 port(s).
2022-05-28T09:41:31: [WARNING] Port /dev/serial/by-id/usb-Sierra_Wireless_Inc._Sierra_Wireless_EM7345_4G_LTE_013937006407355-if02 is already used by another driver or process.

Later edit: After removing brittly still getting the following errors:

2022-05-28T09:58:13: [WARNING] Port /dev/serial/by-id/usb-Sierra_Wireless_Inc._Sierra_Wireless_EM7345_4G_LTE_013937006407355-if02 is already used by another driver or process.
2022-05-28T09:58:10: [INFO] Trying connecting to /dev/serial/by-id/usb-Sierra_Wireless_Inc._Sierra_Wireless_EM7345_4G_LTE_013937006407355-if02 @ 9600 ...
2022-05-28T09:58:08: [INFO] Trying connecting to /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AR0JVCUB-if00-port0 @ 9600 ...
2022-05-28T09:58:07: [WARNING] Port /dev/serial/by-id/usb-Sierra_Wireless_Inc._Sierra_Wireless_EM7345_4G_LTE_013937006407355-if02 is already used by another driver or process.
2022-05-28T09:58:04: [INFO] Trying connecting to /dev/serial/by-id/usb-Sierra_Wireless_Inc._Sierra_Wireless_EM7345_4G_LTE_013937006407355-if02 @ 9600 ...
2022-05-28T09:58:03: [WARNING] Communication with /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AR0JVCUB-if00-port0 @ 9600 failed. Starting Auto Search...
2022-05-28T09:57:47: [INFO] Scan complete. Found 2 port(s).


Any ideas? Thanks!
Last edit: 1 year 10 months ago by George Alin Costea.
1 year 10 months ago #83173

Please Log in or Create an account to join the conversation.

  • Posts: 24
  • Thank you received: 2
Just re-upgraded to Ubuntu Mate 22.04
All installed ok, indi-full & Kstars, connected all my equipment except mount (it's too far away) connected.

Thanks Jaseem, great stuff...
1 year 10 months ago #83175

Please Log in or Create an account to join the conversation.

Time to create page: 1.711 seconds