Welcome, Guest
Username: Password: Remember me
25 Jul 2018
Glad to announce of release of INDI Library v1.7.4 on 2018-07-25. A few drivers were added in this release as we continue to improve & stabilize existing drivers.
Read More...
  • Page:
  • 1
  • 2

TOPIC: FYI - Windows running Synscan,Android Phone running Sky Safari,

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 1 week ago #29298

I guess you could test my INDI fork for az gti. It connects with Udp 11880

Please Log in or Create an account to join the conversation.

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 1 week ago #29315

  • stash
  • stash's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 97
  • Karma: 2
  • Thank you received: 24
quick reply from SW
"
Yes, we do plan to provide a Linux version once our tool (RAD Studio) support Linux and we finish the development for Mac.

It might be available in the middle of next year.

Regards

SynScan App Team"

if it comes that would be good news :-)

Please Log in or Create an account to join the conversation.

RPI3 Ubuntu 16.04 / AMD desktop Kstars under Ubuntu 16.04 Mounts :azeq6 ,SWAZGoTo

RPI3 Fedora testing out on AMD desktop Fedpra 28 - running kstars 2.9.4 , Indilib 1.7.4 ?????

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 1 week ago #29316

  • stash
  • stash's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 97
  • Karma: 2
  • Thank you received: 24
so long as it doesn't "screw up" (tech term :-) ) my test set up I would do that what would I have to do to just update the items you have changed ?
Let us know and I will give it a go.
Note ! I dont use a SW Wireless Adapter so not a true reflection as it can run in AP or client mode my ESP runs in client mode only .

Please Log in or Create an account to join the conversation.

RPI3 Ubuntu 16.04 / AMD desktop Kstars under Ubuntu 16.04 Mounts :azeq6 ,SWAZGoTo

RPI3 Fedora testing out on AMD desktop Fedpra 28 - running kstars 2.9.4 , Indilib 1.7.4 ?????

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 1 week ago #29328

  • stash
  • stash's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 97
  • Karma: 2
  • Thank you received: 24
Just did a est with Wine on Fedora 28 running Synscan App Pro 1.10 (windows version) and same hardware as above thread. Not only does Synscan App load and run but I was able to connect SynScan App Pro to my AZGOTO and connect IndiLib Synscan driver to SynScan App Pro AND drive the SWAZGOTO. Not a massively deep est bu it did work and speed was excellent on my Desktop - will it be as good on boards such as RPI (will it run as this is Arm ????) and my Aaeon Core (which is at least Intel x86/64)

If this works well then there is no reason,IMO, to have any other Indi Driver(e.g. SWALTAZ) but Synscan to run SW AZ mounts - i did say IMO :-)

Plus you get the benfit of being to connect Ascom devices to the mount via SW Mobile Ascom driver if required LOL

See screen print :-)
Attachments:
The following user(s) said Thank You: tkottary

Please Log in or Create an account to join the conversation.

RPI3 Ubuntu 16.04 / AMD desktop Kstars under Ubuntu 16.04 Mounts :azeq6 ,SWAZGoTo

RPI3 Fedora testing out on AMD desktop Fedpra 28 - running kstars 2.9.4 , Indilib 1.7.4 ?????

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 1 week ago #29338

  • stash
  • stash's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 97
  • Karma: 2
  • Thank you received: 24
More Testing this time using serial com port in Synscan App Pro - ok it fails no surprise there as its built for Windows (com not USB0 on Linux).

However using my old friend SER2NET I am able to redirect UDP 11880 to /dev/ttyUSB0 and it works a dream - just slight mods to ser2net.conf file to use "kickoffolduser=true" and the line to control UDP 11880 ---> /dev/ttyUSB0

So there you have it you can even use the a RPI with a USB Adapter (mine was FDTI) or (I am guessing cos I dont have one) a SW WiFi Adapter or mostly any of the WiFi enabled AZGOTO mounts. Even a EQ mount would work if you preferred the Synscan Indi driver to EQMOD.

Clear Skies !

Please Log in or Create an account to join the conversation.

RPI3 Ubuntu 16.04 / AMD desktop Kstars under Ubuntu 16.04 Mounts :azeq6 ,SWAZGoTo

RPI3 Fedora testing out on AMD desktop Fedpra 28 - running kstars 2.9.4 , Indilib 1.7.4 ?????

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 1 week ago #29344

This is interesting . Thank for you testing . So i run the synscan pro windows app via wine i should be able to connect to wifi?

Please Log in or Create an account to join the conversation.

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 1 week ago #29346

ok app works fine on wine, but how does indi connect to this app on wine?

Please Log in or Create an account to join the conversation.

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 1 week ago #29347

192.68.4.2 and 11882 TCP was able to connect to synscan driver, but does not respond to mount commands from ekos.

Please Log in or Create an account to join the conversation.

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 1 week ago #29353

  • stash
  • stash's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 97
  • Karma: 2
  • Thank you received: 24
ok first off has the Synscan App connected to your Wifi mount and is your mount running in Client mode (my tests were all in client mode so Wifi Adapter (or my esp826) got its IP from router and is on the same network as the Linux box where Synscan App is running (and Ekos).

first you must connect Synscan App via UDP to the Mounts IP address you will have to switch off find device (try that later) and use "Fixed IP" address in Synscan App. Then press "Connect" on the Synscan App - if it works it will ask you EQ/AZ depending on the mount (mine is AZGOTO so doesn't ask) .

Once the Synscan App is connected to the mount

Start Kstars/Ekos on the same box that is running Synscan App (for now you can get braver later :-) ) In your profile you should set the address as 127.0.0.1 and the port as 11882 and TCP - this will point to the Synscan App and should connect if all is well.

if the Synscan App cannot connect to the mount ther is little point doing he Kstars/Ekos/Indi bit as there is a problem - check SElinux permissions,firewall etc . Can you ping ok the Mount from the Linux box. If you have Wireshark are messages being sent from the App to the mount and is anything coming back ?
As I say I dont have an SW Wireless adapter but both my ESP286 and RPI Zero W work so dont see why SW own software won't LOL

Please Log in or Create an account to join the conversation.

RPI3 Ubuntu 16.04 / AMD desktop Kstars under Ubuntu 16.04 Mounts :azeq6 ,SWAZGoTo

RPI3 Fedora testing out on AMD desktop Fedpra 28 - running kstars 2.9.4 , Indilib 1.7.4 ?????

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 4 days ago #29425

  • stash
  • stash's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 97
  • Karma: 2
  • Thank you received: 24
Managed to get Windows Synscan App Pro working on Ubuntu 16.04 on my UP Core 2gb/32gb board. Indi/Ekos connects and is able o drive the mount no problem using my ESP826 box (acts as client listens on UDP 11880 connected to my house router network). Runs ok but DO NOT TRY and minimise the screen it locks the Ubuntu OS up (still runs but very Slooooooooooooow. If you dont minimise the speed is remarkably good. Didn't connect camera yet so may be slower. I will also try the Ser2net route to see how that performs. One think to noe you must use Wine-staging (mine used version 3.4) follow this install procedure (Ubuntu ) wiki.winehq.org/Ubuntu

Hope that helps someone :-)

Please Log in or Create an account to join the conversation.

RPI3 Ubuntu 16.04 / AMD desktop Kstars under Ubuntu 16.04 Mounts :azeq6 ,SWAZGoTo

RPI3 Fedora testing out on AMD desktop Fedpra 28 - running kstars 2.9.4 , Indilib 1.7.4 ?????

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 4 days ago #29444

  • stash
  • stash's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 97
  • Karma: 2
  • Thank you received: 24
Ok I tried the USB adapter route by using Ser2net UDP - so Wine Win Synscan App Pro loads and uses the UDP connection to 127.0.0.1 port 11880 - the 11880 has been set up in ser2net to redirect all data to USB Adapter (and visa server). This connects no problem so long as the /dev/ttyUSB0 permissions are correct and ser2net is run via SUDO (unless you start as a service).

Once this is connected to the mount you can then connect / start Indi synscan using ethernet TCP 127.0.0.1 port 11882 - the mount should be now conneced.

As per other details you cannot minimise the wine screen ( a bit of a pain) you just have to move out down o he bottom of the screen so you can see Kstars.

It works just need a field trial now. It short No physical Handset needed to run Indi Synscan so less wires and all running in one box (in my case a UP Core)

Clear skies

Please Log in or Create an account to join the conversation.

RPI3 Ubuntu 16.04 / AMD desktop Kstars under Ubuntu 16.04 Mounts :azeq6 ,SWAZGoTo

RPI3 Fedora testing out on AMD desktop Fedpra 28 - running kstars 2.9.4 , Indilib 1.7.4 ?????

FYI - Windows running Synscan,Android Phone running Sky Safari, 2 months 3 days ago #29446

  • stash
  • stash's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 97
  • Karma: 2
  • Thank you received: 24
Update - now have Astrometry.net working both online and offline - not too bad speed on the offline is "close" to object. The Ekos options index set up sucks big time - fails to download and install anything - partly due to permissions I had to do it manually bu copying files from share on my pc then use SUDO mv to move he files to /usr/share area - not something a novice would want to do. People on SGL are saying Indilib is for "Geeks" I do have some sympathy iwith what they say. While I am on a rant - make geo settings a bit more friendly like excepting locations details in other formats and converting the data to the required values. Plus updating GPhoto means you have to set up the camera sensor/res again - there most be a better way !!!!!!
Sorry got out of bed he wrong way :-)

Any how now waiting for clear skies for full field test.

Please Log in or Create an account to join the conversation.

RPI3 Ubuntu 16.04 / AMD desktop Kstars under Ubuntu 16.04 Mounts :azeq6 ,SWAZGoTo

RPI3 Fedora testing out on AMD desktop Fedpra 28 - running kstars 2.9.4 , Indilib 1.7.4 ?????
  • Page:
  • 1
  • 2
Time to create page: 0.112 seconds

Login



3rd Party

Choose from the numerous 3rd party INDI drivers to suit your needs!

Got Problem?

Check out the FAQ, the forum, and the bug tracking system to resolve any issues you might have!
You can also subscribe to INDI newsletter and development mailing lists to get the latest updates on INDI!


Gallery

Replica

Why INDI

Replica