Nikon DSLR conflict

  • Posts: 13
  • Thank you received: 0

Nikon DSLR conflict was created by Jantje

I am still in the expermit phase.
Have configured all devices via the wizard of Kstars, but I continue receive error messages. Sometimes I manage to connect my nikon D500 other times he connect to my Zwo ASI290MM mini. I have configured the ZWO ASI290MM mini as my Guide camera

Can someone give me a clear answer what goes wrong here

When I start ekos I get the next image


With the ZWO ASI290MM mini I get the following error messages



sometimes I also get this message from the tab nikon D500
And do not know how to manually disconnect it

6 days 15 hours ago #34985

Please Log in or Create an account to join the conversation.

  • Posts: 1490
  • Karma: 18
  • Thank you received: 443

Replied by rlancaste on topic Nikon DSLR conflict

So the first 2 things you posted here are not errors. The first item, the PTPCamera dialog is how you will be able to quit PTP Camera so that you can get your camera to be available to connect to it. If ptp camera keeps running, then it will block access, The dialog is a nice way to quit the program. The second item just says that you have not yet saved your driver configuration, it is not really an error per we, because that is optional.

The third item is actually a connection issue that you will want to investigate.

Thanks,

Rob
6 days 13 hours ago #34987

Please Log in or Create an account to join the conversation.

  • Posts: 13
  • Thank you received: 0

Replied by Jantje on topic Nikon DSLR conflict

I was finally happy that the problems of DSLR Nikon D500 almost were solved (I thought) I see I have new problems.
I can not change the format to RAW (green box), but it is set in tab Image_Info. As well as the size I can not change to 5568 X 3712 pixel (red box)
My Preview is 15 x 23 - The size of the sensor chip is 23,5 x 15,7
If I can solve those problems then the DSLR Nikon D500 is solved. ( I hope )
I Hope someone can help me..
See images below




5 days 23 hours ago #35013

Please Log in or Create an account to join the conversation.

Time to create page: 0.190 seconds