For QHYCFW3, there is no settings because it automatically detects the maximum number. IF it reports wrong number, please share the logs
For QHYCF2, there is a Filter (Count) setting in Main Control where you can set the number of filters before you connected. Make sure to go to Options --> Configuration Save to make sure it sticks.
Hello and Happy New Year. Just get the gift QHY600L & CFW3 and trying to connect to KStars. Earlier I used ASI2600MC and there were no problem at all.
CFW3 connected to QHY600 via serial and seems it conflicts with EQMod driver. And does not work. Running on last astroberry on rpi4. Try to change CFW3 to CFW2 driver but does not help.
I can connect CFW3 withour mount or mount without CFW3. Cannot connect both.
2021-12-31T14:10:36: [WARNING] Port /dev/serial/by-id/usb-u-blox_AG_-_www.u-blox.com_u-blox_GNSS_receiver-if00 is already used by another driver or process.
2021-12-31T14:10:33: [INFO] Tryin2021-12-31T14:11:01: [INFO] Scan complete. Found 2 port(s).
2021-12-31T14:10:29: [INFO] Trying connecting to /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AQ0193CG-if00-port0 @ 9600 ...
Purged config to default for EQMod and CFW3 and got the same error. Are there any settings I should set up before to use filter whell?