×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Can not connect to my QHY CFW3

  • Posts: 9
  • Thank you received: 1
Ah, thanks!

After the update I'll tell how it went.
5 years 6 hours ago #37057

Please Log in or Create an account to join the conversation.

  • Posts: 9
  • Thank you received: 1
After installing the latest nightly, still, the same.

Even if I set the number of filters to 7 (while the FW is disconnected) and set, save the config and reconnect, the amount of filter is still 5.

Looks like the setting is not being written correctly or something like that.
4 years 11 months ago #37093

Please Log in or Create an account to join the conversation.

  • Posts: 26
  • Thank you received: 2
Hello and Happy New Year. Just get the gift QHY600L & CFW3 and trying to connect to KStars. Earlier I used ASI2600MC and there were no problem at all.
CFW3 connected to QHY600 via serial and seems it conflicts with EQMod driver. And does not work. Running on last astroberry on rpi4. Try to change CFW3 to CFW2 driver but does not help.
I can connect CFW3 withour mount or mount without CFW3. Cannot connect both.

2021-12-31T14:10:36: [WARNING] Port /dev/serial/by-id/usb-u-blox_AG_-_www.u-blox.com_u-blox_GNSS_receiver-if00 is already used by another driver or process. 
2021-12-31T14:10:33: [INFO] Tryin2021-12-31T14:11:01: [INFO] Scan complete. Found 2 port(s).
2021-12-31T14:10:29: [INFO] Trying connecting to /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AQ0193CG-if00-port0 @ 9600 ... 

Purged config to default for EQMod and CFW3 and got the same error. Are there any settings I should set up before to use filter whell? 
2 years 2 months ago #78962

Please Log in or Create an account to join the conversation.

  • Posts: 26
  • Thank you received: 2
Just solved this promlem. When QHY600 connected to CFW3 via 4 pin serial port the whell becomes a part of CCD and there is no need to select CFW in indi settings as separate equipment. I removed it and it works fine! Happy New Year :)
The following user(s) said Thank You: Jasem Mutlaq
2 years 2 months ago #78964

Please Log in or Create an account to join the conversation.

Time to create page: 0.554 seconds