×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

[SOLVED] Flats Counter Doesn't Count

  • Posts: 106
  • Thank you received: 11
Had an annoying issue today where I couldnt take a set of flats;

Auto ADU adjustment process worked fine.

Each image taken retained the same file name 'Flat_Lum_0.55_secs_001.fits' and therefore overwrote itself each time.

To overcome this I had ticked the TS (time stamp) to differentiate the image name, subsequently all frames were saved.

Not sure if this is a bug or a user setting error. Anyone experience the same?

Keith

Nightly Build, log file attached
Skywatcher 190MN - EQ6 Pro (with Belt Mod) - ASI1600MM-Cooled - ASI EFW7 - ASI120MM - WO f4 Guide Scope - Rigel nStep - KStars/Ekos - KDE - PixInsight
Last edit: 5 years 2 weeks ago by Keith Cobby. Reason: Updated to solved
5 years 2 weeks ago #36259
Attachments:

Please Log in or Create an account to join the conversation.

Thank you for report, it is now fixed in GIT.
The following user(s) said Thank You: Keith Cobby, AstroNerd
5 years 2 weeks ago #36260

Please Log in or Create an account to join the conversation.

  • Posts: 48
  • Thank you received: 3
Just so you know: I did experience this, and worked around it in the same way.
Good to know it should be fixed now.
5 years 2 weeks ago #36267

Please Log in or Create an account to join the conversation.

  • Posts: 69
  • Thank you received: 20
I had this same issue happen this morning using kstars 3.2.0 from a nightly build. Unfortunately I did not have logs enabled.
5 years 2 weeks ago #36421

Please Log in or Create an account to join the conversation.

It's easy to test this indoors, I cannot replicate any problems now.
5 years 2 weeks ago #36433

Please Log in or Create an account to join the conversation.

  • Posts: 69
  • Thank you received: 20
I tried again today with logs enabled. Could I have a wrong setting?

File Attachment:

File Name: log_11-39-...t.tar.gz
File Size:4 KB
5 years 2 weeks ago #36452
Attachments:

Please Log in or Create an account to join the conversation.

You need a slightly more updated build, try to update again.
5 years 2 weeks ago #36468

Please Log in or Create an account to join the conversation.

  • Posts: 69
  • Thank you received: 20
That took care of it thanks so much.
5 years 2 weeks ago #36473

Please Log in or Create an account to join the conversation.

Time to create page: 0.649 seconds