Could you provide more info please? What errors did you get? In what way did you notice that "EQMod and ZWO not recognized"? I use both EQMod and ZWO on nightly so I'd very much like to know the symptoms I need to look out for. Plus, on a less selfish note, it will help the developers fix the issue
This was a build I downloaded just 3 hours ago.
No errors, just my mount/camera wouldn't show up as if they were not connected.
Both RPI and Windows clients.
Once I reverted to an older build, all started to work normally (with the same cabling).
Dunno. Maybe it was a faulty install? I'll try to update tomorrow again and see what happens.
Thanks!
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
After the updates I had a successful session. No crashes. No hiccups. Everything worked.
Except for the usual (for me) auto-guiding problem. It works but is not very accurate. RA guiding is good but the DEC is not so (sometimes it's better sometimes its worse and it takes many tries to get calibrated - it keeps failing at the last step - DEC reverse drift. The first three steps usually go without a fail).
I probably have some play/backlash in the DEC axis. My mount is cheap (but very light and great for a mobile setup), so this is to be expected, I guess.
Happy with the outcome. : )
Thanks!
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.