×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

AstroPi3 Scripts revised

  • Posts: 2876
  • Thank you received: 809
I can take a look at it. Right now I'm a bit bogged down with other projects. But it is getting into the summer now and I should have more time since my students are almost done.
The following user(s) said Thank You: MF
3 years 9 months ago #55141

Please Log in or Create an account to join the conversation.

  • Posts: 56
  • Thank you received: 1

Replied by MF on topic AstroPi3 Scripts revised


Thank you very much. We are getting into winter here in Australia, and this is the best time for Astro down here. I just need that updated driver before I can start testing my setup.
3 years 9 months ago #55145

Please Log in or Create an account to join the conversation.

  • Posts: 56
  • Thank you received: 1

Replied by MF on topic AstroPi3 Scripts revised

hi Rob, were you able to look into this?
3 years 9 months ago #55482

Please Log in or Create an account to join the conversation.

  • Posts: 1
  • Thank you received: 0
Hi all.
Love this software. I've been using the astropi3 set up for a year now, but just through my home network via Ethernet and vnc viewer on my tablet. Also with kstars on my pc.
I decided to give the hotspot a go because I might try some dark sky imaging this year, but for the life of me I can't remember my hotspot password. I can go into the pi's desktop through vnc but it wontw seem to let me edit it, unless I know said password.

any help would be much appreciated.
Jason

Sent from my KFMAWI using Tapatalk
Last edit: 3 years 8 months ago by Jason Murphy.
3 years 8 months ago #56792

Please Log in or Create an account to join the conversation.

  • Posts: 24
  • Thank you received: 2

Hi Jasonmur,

I had the same issue before and had to find the password in the Github script. I think the password for the Field WiFi is the name of the Field WiFi access point and then suffixed with '_password'. For example, if your FieldWifi access point that you want to connect to is called "MyPi_FieldWifi_5G", then the password would be "MyPi_FieldWifi_5G_password" (follow same approach for the 2.4GHz access point which does not have '5G' in it).

Source, lines #422-428:
github.com/rlancaste/AstroPi3/blob/maste...upAstroRaspbianPi.sh
The following user(s) said Thank You: bengourben
3 years 8 months ago #56795

Please Log in or Create an account to join the conversation.

  • Posts: 8
  • Thank you received: 0
Hi feilimb.
Thanks for the quick response.
I believe you have it, because I did find a note to myself on my phone with something_password...I was being too cryptic for my own good!
Thanks for the help, I'll give it a go when home.

Sent from my SM-A505FN using Tapatalk
3 years 8 months ago #56799

Please Log in or Create an account to join the conversation.

  • Posts: 8
  • Thank you received: 0
Thanks so much. Feilimb.
I believe you are right because I did have a note on my phone to myself with desktop_password. Didn't make sense to me, but now it does.
Appreciate the help. Thanks again.

Sent from my SM-A505FN using Tapatalk
3 years 8 months ago #56800

Please Log in or Create an account to join the conversation.

  • Posts: 8
  • Thank you received: 0
Hi.
Thanks. It actually turned out to be raspberrypi_password
But got there eventually!

Sent from my SM-A505FN using Tapatalk
3 years 8 months ago #56803

Please Log in or Create an account to join the conversation.

  • Posts: 8
  • Thank you received: 0
Thanks. This is the third time I've tried to respond to your helpful reply. But I can't see anything from me appearing in the forum, apart from my initial query.
Turned it to be
raspberrypi_password

Sent from my SM-A505FN using Tapatalk
3 years 8 months ago #56852

Please Log in or Create an account to join the conversation.

  • Ray
  • Ray's Avatar
  • Offline
  • New Member
  • New Member
  • HEQ5 , FS102 , ASI1600 MONO ASI183MC , 200 F5 NEWT
  • Posts: 7
  • Thank you received: 0

Replied by Ray on topic AstroPi3 Scripts revised

Thanks for all the work. I installed the scripts on a Rock64 with Debian and it works great over the network after I created a share for file transfer.
My only problem is can not find a VNC viewer I understand which will enable direct Ethernet cable access for a win10 computer to the Rock64.
3 years 4 months ago #62745

Please Log in or Create an account to join the conversation.

  • Posts: 1309
  • Thank you received: 226

Replied by Andrew on topic AstroPi3 Scripts revised

I'm configuring a setup from a clean install of Raspberry OS (64bit) and found KStars Master will not compile unless I built and installed stellarsolver first. Therefore this step should be added to the script.
Also, if you have a chance, Please add Firecapture and OaCapture to setup. I have had difficulty installing them myself.
Thank you kindly.
3 years 4 months ago #63098

Please Log in or Create an account to join the conversation.

  • Posts: 2876
  • Thank you received: 809
in which script is this a problem, the raspbian one?
3 years 4 months ago #63099

Please Log in or Create an account to join the conversation.

Time to create page: 1.690 seconds