Hi Dave,
In short yes, using my Skyris 132C.
I’ve not had my rig up since Xmas due to other commitments so I am struggling to remember which driver and what settings.
I will however aim this weekend to set it up temp to access my profile in Ekos and this should let me see what driver and which settings I used. If I can, I will post up snapshots too.
Hope this helps,
Thanks, Richard.
Hi Dave, I haven’t fired up Stellarmate but I opened Ekos to look at the profile I had set up. I’m using the 132C as an Aux1 with driver V4L2 CCD
this was from a suggestion of Jasem which worked for me.
When fired up and looking into the tabs, it is recognised as the Skyris 132C but you may have to manually set your pixel settings if the automation does not. I have attached the profile image if it works
Richard:
That is most helpful - I'm toying with acquiring a Skyris 274.. which looks an interesting camera .. but unless it can be made to work on my Stellarmate .. It's just no good.. Thank you this is most helpful !.
You’re welcome Dave, let us know how you get on. I’m hoping to set my rig back up this weekend, get the latest Stellarmate OS loaded and the same with KStars/Ekos. Once running, I should have more info available with the live system which I will pass on.