×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Astroberry and Onstep Mini2 (Teensy 3.2)

  • Posts: 34
  • Thank you received: 3
Hello All,

I´m triying to connct my new Onstep Mini2. The contoller and USB is the Teensy 3.2.
It comes at indi as /dev/ttyACM0. I Select that but the connection will not be established.
At the console : cat /dev/ttyACM0 is also hanging. No response.

And:
ls -l /dev/ttyACM0
crw-rw-rw- l root dialout 166, 0 Mär 15 10:55 /dev/ttyACM0

What can I do ?

By the way, Onstep and Ascom is working at my Win 10 PC

CS Reiner
Last edit: 4 years 1 week ago by Reiner vom Bruch.
4 years 1 week ago #50751

Please Log in or Create an account to join the conversation.

  • Posts: 983
  • Thank you received: 375
What driver are you using?
4 years 1 week ago #50792

Please Log in or Create an account to join the conversation.

  • Posts: 294
  • Thank you received: 54
I am not sure if it is similar in Astroberry but it could be the "modemmanager" taking control of the /dev/ttyACM* or /dev/ttyUSB* devices. If so, you can remove "modemmanager" with "sudo apt-get remove modemmanager", if I remember the command correctly. The other thing could be related to the udev rules file for Teensy devices. You will find info on www.pjrc.com/teensy/td_download.html under the Linux udev rules link: www.pjrc.com/teensy/49-teensy.rules.

Hope it helps.
4 years 1 week ago #50797

Please Log in or Create an account to join the conversation.

  • Posts: 34
  • Thank you received: 3
Hi Radek,

I´ve selected the LX200 Onstep Driver

@G_
I give it a try and will report what happend

CS
Reiner
4 years 1 week ago #50828

Please Log in or Create an account to join the conversation.

  • Posts: 34
  • Thank you received: 3
Hej G_!

your tip did it:
sudo apt-get remove modemmanager

Thanks
Reiner
4 years 1 week ago #50837

Please Log in or Create an account to join the conversation.

  • Posts: 294
  • Thank you received: 54
Glad it did.

Enjoy your OnStep controller now, and clear skies to you and everyone as we don't know how long we are going to be restricted in our travels and happenings.

Gilles
4 years 1 week ago #50841

Please Log in or Create an account to join the conversation.

  • Posts: 34
  • Thank you received: 3
Thanks a lot.

now anothe issue,

I´m not able to adjust the slew rate via indi control panel and also not with kstars Mount control.
In indi-control panel I can see "Setting Max Slew Rate to (1...9)", but this is not adjusted in Onstep himself.
The only thing that works is, when I use the Onstep App and adjust the speed at Guide/Focus there.

My Setup:
RPI4 with Astroberry and SSD, the Onstep MiniPCB2 (Teensy 3.2)
SX-CCD and the UPB Powerbox.
KStars for Windows 3.4.1 on my Win 10 Laptop
Both connected via GBit Lan
No error-messages at all.

Any idear ?

CS
Reiner
4 years 1 day ago #51270

Please Log in or Create an account to join the conversation.

Time to create page: 0.973 seconds