×

INDI Library v2.0.7 is Released (01 Apr 2024)

Bi-monthly release with minor bug fixes and improvements

Read More...

Ethernet cable (Solved)

  • Posts: 62
  • Thank you received: 9

Ethernet cable (Solved) was created by Jim S.

Let me preface that I am able to log onto my Stellarmate via the WiFi using Ubuntu without issues:



When I attempt to use an Ethernet cable things don't go well... I have set my eth0 adapter up:



I have tried this with auto on DNS and off.



I have tried authentication on and off. I have used; user: stellarmate, password: smate and a few other variations. I am stuck at this point on how to achieve a Cat5 connection???? Any tips, what am I missing here?

Cheers
Jim
Celestron CGX, QSI683 Astrodon Gen 2 E series LRGB, Ha, OIII, ES102CF, ZWO-ASI178MC, 60mm guide scope, Pegasus Focus Cube 2, Feather Touch Focuser.
Last edit: 3 years 10 months ago by Jim S..
3 years 10 months ago #55578
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 62
  • Thank you received: 9

Replied by Jim S. on topic Ethernet cable (Solved)

Configuration issues. On Ubuntu's side you don't need to place the DNS server IP address, all you have to do switch automatic to 'on' and make sure nothing is in the 'Gateway' IP address. Also have to configure the eno1 using the ifconfig command

me:~$ sudo ifconfig eno1 192.168.100.2
password: ########

Now I have to find the config files to make this permanent...

Cheers
Jim
Celestron CGX, QSI683 Astrodon Gen 2 E series LRGB, Ha, OIII, ES102CF, ZWO-ASI178MC, 60mm guide scope, Pegasus Focus Cube 2, Feather Touch Focuser.
The following user(s) said Thank You: Jasem Mutlaq
3 years 10 months ago #55590

Please Log in or Create an account to join the conversation.

Time to create page: 0.895 seconds