Hello. My QHYCFW3 doesn't connect with 3.5.0. The error shows as:
2020-11-29T20:08:51: [ERROR] Handshake failed: Timeout error. Firmware must be higher than 201409
2020-11-29T20:08:25: [INFO] Trying connecting to /dev/cu.URT1 @ 9600 ...
I can choose the previous QHYCFW2 profile, and it will connect, but without the ability to choose 7 filters. I had seen a post indicating that a recent update had been coded for the QHYCFW3, but I don't believe it's included in 3.5.0. Is there a way to incorporate this update into my 3.5.0? Please note that you're dealing with the guy who never got his IBM punch cards to run a program in Statistics class ;~). Thanks for any help!!!
Before when I booted it up the LED color lights would flash and the last light lit was GREEN, indicating this is NOT the USB mode.
After I took a pin and pushed the button while the power was connected, it switched to the USB Mode. And now the last LED light flash is RED meaning it's in USB Mode.
Works great in KSTARS/EKOS now.
One note is it shows 8 POSITIONS on the filter wheel. Since the QHYCFW3 has 7 positions then it will error out and stop working if you select position 8. But it times out after awhile and all is good again!
I had been trying to use the connection from the QHY183 camera directly to the QHYCFW3 rather than the USB connection. I'll try the USB. Thank you, sir!!!