×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Project for ODROID

  • Posts: 18
  • Thank you received: 1
Hi folks! There are any project like astroberry but working on ODROID?

Thanks
3 years 1 month ago #66993

Please Log in or Create an account to join the conversation.

  • Posts: 294
  • Thank you received: 54

Replied by Gilles Gagnon on topic Project for ODROID

You can look at this post from Jerry, it links to a document that may help you.

indilib.org/forum/ekos/8763-documentatio...on-an-odroid-n2.html

As a matter of fact, I run KStars/Ekos and Indi on ODroid N2 and C4. I did the install myself, without Astroberry or similar packages though. Everything if running great.
Last edit: 3 years 1 month ago by Gilles Gagnon.
3 years 1 month ago #66994

Please Log in or Create an account to join the conversation.

  • Posts: 18
  • Thank you received: 1

Replied by Luca Rosignoli on topic Project for ODROID

Thanks g_gagnon for you advice, i try this way!
Moreover i'm looking for a driver like astroberry focuser with which to control a stepper motor using the bcm pins of the odroid, do you know any driver like this?

thanks again
3 years 1 month ago #66997

Please Log in or Create an account to join the conversation.

  • Posts: 294
  • Thank you received: 54

Replied by Gilles Gagnon on topic Project for ODROID

As I use dedicated focusers I can't help you with your specific focuser requirements but there is likely someone in the forum who can provide info.
The following user(s) said Thank You: Luca Rosignoli
3 years 1 month ago #67000

Please Log in or Create an account to join the conversation.

  • Posts: 90
  • Thank you received: 12

Replied by Stephen Wong on topic Project for ODROID

Did you check the driver development page?
indilib.org/developers/add-your-driver/1...ver-development.html
I was able to develop my own driver driving Orion AccuFocus from a RPI GPIO pins with a motor breakout board
It's not a stepper but I think you can do it the similar way.
Some photos for reference... see attachments
 
 
 
Last edit: 3 years 1 week ago by Stephen Wong.
3 years 1 week ago #68878
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.380 seconds