Hi everyone,
I have a cheap Windows 10 laptop which can't really handle Windows 10 itself.
I installed KStars/Ekos, etc. but the thing is so sluggish it's pretty much useless.
So, I want to try to install Ubuntu + INDI/KStars on it.
I went this way a couple of years ago and was using the instructions here on indilib.org (under Get INDI - Ubuntu) - now those pages are all empty.
Can someone point me to a set of instructions, please?
Thanks!
Max S.
RPI 4 B (4Gb) with SMate
Askar FRA400, TPO RC6, Nikon D5500 full spectrum (with IDAS D1 clip-in filter).
ASI2600MC Pro
ZWO ASI120MM Mini on ZWO 30F4
ZWO ASI224MC-S on Orion 50 mm f/3.2
ZWO EAF x 2
SW AZ-GTi
SW HEQ5
RST-135
iOptron CEM40G
RPI 4 B (4Gb) with SMate
Askar FRA400, TPO RC6, Nikon D5500 full spectrum (with IDAS D1 clip-in filter).
ASI2600MC Pro
ZWO ASI120MM Mini on ZWO 30F4
ZWO ASI224MC-S on Orion 50 mm f/3.2
ZWO EAF x 2
SW AZ-GTi
SW HEQ5
RST-135
iOptron CEM40G
Max, instructions are still there, just hidden a bit. Go to Get INDIE, Ubuntu, then click on overview (blue tab) and scroll down. I think that was what you are asking?
-Brian
NanoPC-T4 - Armbian focal
iOptron CEM25P mount
Photoline 80mm triplet refractor
ZWO ASI294MC Pro Imaging camera
ZWO ASI290MM mini Guide camera
ZWO ASI EAF focuser
hehe... I would never have guessed about that button.
Thanks!
Max S.
RPI 4 B (4Gb) with SMate
Askar FRA400, TPO RC6, Nikon D5500 full spectrum (with IDAS D1 clip-in filter).
ASI2600MC Pro
ZWO ASI120MM Mini on ZWO 30F4
ZWO ASI224MC-S on Orion 50 mm f/3.2
ZWO EAF x 2
SW AZ-GTi
SW HEQ5
RST-135
iOptron CEM40G