When I set up each time, I do a rough PA using the built-in reticule on the HEQ5 Pro.
When it's connected to EKOS it seems the LED that lights up the reticule is on full.
Instead I connected the handset to the mount and dialled down the brightness to 2% and it does indeed dim it.
When I restart everything and connect again via INDI it's back at 100%.
Is there a setting in INDI to dim this please ?
WO ZS61 II, ASI183MC Pro, ZWO 120MM-S Guider, ZWO EAF, HEQ5 Pro, INDI/EKOS on Ubuntu 20.04
Odd. In my experience, what I set it to from the hand controller remained set.
But perhaps there is an option in EQMod driver that is overriding it.
INDI/KStars on Raspberry Pi 4, 4gb
Raspbian Buster with AstroPi3 script configuration
Skywatcher HEQ5 Pro Mount
Canon 600D Camera
Orion SSAG/ASI120mm @280mm Guide Scope
Waveshare Stepper Motor Board - DIY Focuser
Adafruit GPS Module
Generic Bluetooth Joystick.
Startech 7 port powered USB Hub.