×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Gemini 2 control over ethernet

  • Posts: 11
  • Thank you received: 0
Hi,

Does anyone have step by step instructions on setting up Losmandy GM811G with Gemini 2 with INDI/EKOS. I want to use ethernet connection?
5 years 11 months ago #24842

Please Log in or Create an account to join the conversation.

Do you know its IP address and port? If yes, then just put those under Connections tab of the Losmandy driver and then connect right away. Make sure Ethernet is selected there first.
The following user(s) said Thank You: Ajay
5 years 11 months ago #24870

Please Log in or Create an account to join the conversation.

  • Posts: 11
  • Thank you received: 0

Replied by Ajay on topic Gemini 2 control over ethernet

Thank you Jasem. Will give it a try.
5 years 11 months ago #24934

Please Log in or Create an account to join the conversation.

  • Posts: 11
  • Thank you received: 0

Replied by Ajay on topic Gemini 2 control over ethernet

Hi Jasem,

I was able to connect to Gemini 2 over internet. Thanks for your help.
I noticed one thing on the location settings though: I have set my location on Gemini HC as Lat = 29.45 N and Long = -95.21 (to indicate W). But the location information shown in EKOS/INDI are Lat = 29:45 and Long = 264.38
Based on math the long displayed in INDI is 360 - 95.21, but I want to confirm if the location is being set correctly. As far as I remember, this behavior is not seen in EQMOD that I tested before with my other mount.

Once again, thank you so much for great astroimaging package.

Ajay
5 years 11 months ago #24956

Please Log in or Create an account to join the conversation.

Time to create page: 0.753 seconds