×

INDI Library v2.0.7 is Released (01 Apr 2024)

Bi-monthly release with minor bug fixes and improvements

polar alignment, is this a bad one?

  • Posts: 2255
  • Thank you received: 223


Polar error 0° 10' 41"
5 years 5 months ago #30749
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 424
  • Thank you received: 66
Hi gonzo, I’m going to direct you to another video where I show kstars in action for PA. check out the very end if you don’t want to watch the whole thing.
The following user(s) said Thank You: Gonzothegreat, Alan Mason, Brian
5 years 5 months ago #30754

Please Log in or Create an account to join the conversation.

  • Posts: 424
  • Thank you received: 66
Ps: you will see you need to be under a minute. Say 30”

Watch the whole video and you’ll see why ;-)
5 years 5 months ago #30755

Please Log in or Create an account to join the conversation.

  • Posts: 2255
  • Thank you received: 223
I watched the entire video now, nice one. I shall do the polar alignment using the Ekos module next time I'm over there.
The following user(s) said Thank You: Alan Archer
5 years 5 months ago #30794

Please Log in or Create an account to join the conversation.

  • Posts: 133
  • Thank you received: 33
Nice video, thanks for posting it. I haven't tried the polar alignment tool yet but now that I have an idea how it works I think I"ll give it a go tonight.
The following user(s) said Thank You: Greg
5 years 5 months ago #30797

Please Log in or Create an account to join the conversation.

  • Posts: 424
  • Thank you received: 66

Cool! :-) Good luck!
5 years 5 months ago #30798

Please Log in or Create an account to join the conversation.

  • Posts: 2255
  • Thank you received: 223
attempt 1:



attempt 2:



attempt 3:


<strong>VERY</strong> frustrating to say the least, on each attempt I did put the star I selected in the bullseye.
I wasn't able to check the third attempt as the clouds rolled in, but as you can see from the above it didn't go according to plans.
Last edit: 5 years 4 months ago by Gonzothegreat.
5 years 4 months ago #32681
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 2255
  • Thank you received: 223
I think I know why.... as I am using the new Atik driver and the camera no longer works with this one, I have to use the mini guider which is powered by the QHY5, but the guider isn't 100% properly aligned to the main telescope. I do think this is the problem. As soon as there's another clear night or at least a couple of hours, I shall try again. Oh, and I will re-install the Cloudmakers Atik driver for the time being.
5 years 4 months ago #32685

Please Log in or Create an account to join the conversation.

  • Posts: 424
  • Thank you received: 66

Yes, you should use the guide scope but no, it doesn't need to be aligned. Thats one of the beauties of it. One thing you should do is always start from park and always auto rotate the same direction. Otherwise we found backlash in the mount will give erratic results. So I always start from park and rotate west.
5 years 4 months ago #32687

Please Log in or Create an account to join the conversation.

  • Posts: 2255
  • Thank you received: 223
I start from the home position, which is scope straight up to Polaris, weight down. Go West 15° and even 30°.
I tried 3 times last night, and each time I did adjust the knobs on the mount and each time it wasn't right.
5 years 4 months ago #32703

Please Log in or Create an account to join the conversation.

  • Posts: 424
  • Thank you received: 66
I'm not sure why your correction vector is on the green dashed line. I'm not sure what that means but it looks like you're pretty far from the NCP. I usually do the Kstars PA after a polar scope alignment so I have a pretty good alignment to start with. The Kstars PA gets me to sub 20 sec accuracy, often single digit.
5 years 4 months ago #32704

Please Log in or Create an account to join the conversation.

  • Posts: 2255
  • Thank you received: 223
I've checked the weather forecast for tonight and there is a chance of a clear night or at least enough for me to try this again. I'll report back later on...
5 years 4 months ago #32707

Please Log in or Create an account to join the conversation.

Time to create page: 1.279 seconds