INDI Library v1.7.6 Released. (27 Feb 2019)

First release of 2019 comes with quite a few new drivers across the board along with significant performance improvements to INDI camera and live streaming performance. Many drivers received significant updates to improve performance & stability, while a few were re-written from scratch to be in line with INDI standards. Here are some of the highlights:

EQMOD Dec offset on an EQ8

  • Posts: 32
  • Thank you received: 2

EQMOD Dec offset on an EQ8 was created by soffici

Hi all,
this might be the n-th time someone asks this question, but I haven't been able to find an answer in the forum, so I'm asking it again.
I use 2 telescope configurations, one with the imaging and guider telescope directly attached to the saddle, while the other involves a side-by side saddle.
Obviously, in the second configuration, the home position should be offset by 90° (-90° in my specific case).
I can easily insert the dec offset with the Synscan hand-paddle, but I'd like to do it remotely, when the mount is linked to the Stellarmate via the EQDIR cable.
Besides, even after setting the new home position on the Synscan, once it is unplugged from the mount to make way for the EQDIR cable, the mount does not remember the setting, which apparently is stored in the Synscan.
I couldn't find the setting to tell Ekos to shift the home position to -90° and trying to ignore it by plate-solving does not have happy outcomes (you risk having the scope or camera hit the mount when slewing to the next target).
Does anyone have any ideas?
Thank you
2 months 1 week ago #34989

Please Log in or Create an account to join the conversation.

Time to create page: 0.321 seconds