×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Clestron mounts and hibernate

  • Posts: 200
  • Thank you received: 57
Sorry forgot to tell about hibernate. I have hibernate option and it is swiched *OFF*.
8 years 3 months ago #6293

Please Log in or Create an account to join the conversation.

From the log it wasn't responding to 'h', not sure why. At any rate, I made it flush the buffer before it sends any command so maybe that would help.
8 years 3 months ago #6294

Please Log in or Create an account to join the conversation.

  • Posts: 1
  • Thank you received: 0
Hi dirkn,
I've been researching how to add a bluetooth module (running at TTL levels already) to my new Evolution mount to increase the wireless range over the internal wifi. Rather than run through the serial port on the bottom of the HC, I'd rather run through the AUX port to take advantage of the +12V to regulate to the required +5V for the bluetooth module. I've looked over the Hutchenson documentation that you mention and I was hoping you could share more details on the cable you created to work with the FTDI module. Using a similar buffer to the 74HC125 and my own FTDI cable, I haven't been able to successfully connect to my scope via Nexremote. Thanks!
Last edit: 8 years 3 months ago by Nathan Greenfield.
8 years 3 months ago #6331

Please Log in or Create an account to join the conversation.

  • Posts: 456
  • Thank you received: 76

Replied by Derek on topic Clestron mounts and hibernate

I tested with my NXS4.21 handset (which does not support hibernate) and everything working as before.
B)
Derek
8 years 3 months ago #6359

Please Log in or Create an account to join the conversation.

Time to create page: 0.402 seconds