×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

New iOptron Go2Nova 8409 controller for CEM26 and GEM28 mounts

  • Posts: 29
  • Thank you received: 0
Hello.
So what is required to move this along,more uptake of EKOS users who can supply logs to troubleshoot or input from Ioptron?
3 years 3 weeks ago #67928

Please Log in or Create an account to join the conversation.

  • Posts: 9
  • Thank you received: 2
I'm happy to help out too. My mount seems to work (now I've fixed most of the backlash issues), but the rig with it on crashes lots if I use a QHY268M (and some, but less with my ASI1600). Running the nightlies, my other rig with a EQ6 doesn't crash with the camera, so it's something specific to the CEM26, but exacerbated by the higher res camera.
3 years 3 weeks ago #67929

Please Log in or Create an account to join the conversation.

My QHY268M have been stuck in customs for 2 weeks now, but I should be getting it soon. If there are crashes caused by the camera then I should be able to pinpoint the issue.
3 years 3 weeks ago #68015

Please Log in or Create an account to join the conversation.

  • Posts: 29
  • Thank you received: 0

which mount is that your using?
3 years 3 weeks ago #68032

Please Log in or Create an account to join the conversation.

  • Posts: 9
  • Thank you received: 2
3 years 3 weeks ago #68035

Please Log in or Create an account to join the conversation.

  • Posts: 1
  • Thank you received: 0
Hi

Just got my CEM26 with the 8409. I use StellarMate for my automation workflow.  I connected the USB port from the hand controller to StellarMate using the cable supplied with the mount and then selected iOptron CEM70 as the scope.  In StellarMate I'm able to control the mount; perform GOTO etc.  It seems to use the indi_ioptronv3_telescope driver.  Hope that's helpful to any one.
3 years 1 hour ago #69410

Please Log in or Create an account to join the conversation.

Welcome Owen to INDI forums! Thank you for the feedback. I've actually added alias for CEM26 and GEM28 so it's more obvious, but that would make it to the next KStars release.
2 years 11 months ago #69482

Please Log in or Create an account to join the conversation.

  • Posts: 401
  • Thank you received: 41
Hello, 

I am just a click away from Buy Now button for GEM28, so you, owners can you verify that the mount works too with the cable connected directly to PC with Kstars? (as far as I can understand there is a USB cable from the controller that you can connect on a PC).


Thank you!


 
2 years 11 months ago #70049

Please Log in or Create an account to join the conversation.

Yes directly it works fine.
The following user(s) said Thank You: Euripides
2 years 11 months ago #70050

Please Log in or Create an account to join the conversation.

  • Posts: 401
  • Thank you received: 41
Really happy with my new mount, I was able to connect it to my Macbook but I had a few hiccups yesterday on my first night.

In have ON the option Kstars updates all devices (time & place) I can see that the HC updates that info but it goes always +1 hour. I can see LT 22:00 in Kstars, 23:00 in my HC.  Any hints?


After PA I pressed Go To M81 (that time M81 was just left to the Polaris) but the mount went upside down! After many failed attempts, I've packed and moved inside.

Set as parked position pointing North with the counter bar down. Then I set the mount to point at Zenith, I could see the mount into Kstars at Zenith but in meanwhile the mount next to me was pointing on the yellow dot.

(Coordinates are correct cause till yesterday my setup worked flawlessly with my previous mount.)


Any hints, tips appreciated! 
2 years 10 months ago #71144
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 17
  • Thank you received: 2
For the 1st problem maybe check DST setting in both the HC and in kstars?
For the 2nd problem make sure you are installing the telescope the right way. You can easily test this indoor by turning reverse DEC option on.
Just my 2cents
2 years 10 months ago #71154

Please Log in or Create an account to join the conversation.

  • Posts: 401
  • Thank you received: 41
Setting a proper Home Position was the solution for the above. I've lost the whole session for this :-/
2 years 10 months ago #71176

Please Log in or Create an account to join the conversation.

Time to create page: 0.949 seconds