×

INDI Library v1.9.0 Released (23 Apr 2021)

Major INDI Library release v1.9.0 bring significant internal changes championed by @pawel-soja to modernize core INDI Library drivers and clients. New drivers for DeepSkyDad Flat Panel & Pegasus devices plus further improvements to PCM8 drivers.

New users Please read....thanks

  • Posts: 956
  • Thank you received: 128
If you are a new user posting for the first time, please after posting wait for the post to be approved, it may take a few hours, so if you don’t see it on the forum right away this is the reason, and no need to submit the same post again...
Many Thanks...
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
The following user(s) said Thank You: Robert
3 months 2 weeks ago #67958

Please Log in or Create an account to join the conversation.

  • Posts: 5
  • Thank you received: 1
Haha that was me. It was confusing whether it actually posted or not. Got it ;)
The following user(s) said Thank You: AstroNerd
3 months 2 weeks ago #67959

Please Log in or Create an account to join the conversation.

  • Posts: 956
  • Thank you received: 128

Trust me, there have been hundreds of people before you done this and probably loads after too.... :)
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
The following user(s) said Thank You: Richard Beck
3 months 2 weeks ago #67978

Please Log in or Create an account to join the conversation.

  • Posts: 4
  • Thank you received: 0

to the moment ~36 hours have passed since I tried to post. Could you please give some clues, what does it mean "a few hours" - 100h? 200h?
It's just a joke, but I would appreciate if you verify my post, grant me the right of posting and delete it so I will be able to post it again.
3 months 2 weeks ago #67983

Please Log in or Create an account to join the conversation.

  • Posts: 956
  • Thank you received: 128

Sorry but I dont see any pending posts waiting approval....please link me to it...
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
3 months 2 weeks ago #67985

Please Log in or Create an account to join the conversation.

  • Posts: 4
  • Thank you received: 0

I am not sure what happened. I sent a post - and it didn't appear neither in My Topics nor in the forum. I read this warning and was waiting for approval. However, it didn't happened, but now I have the right to post (?).
3 months 2 weeks ago #67987

Please Log in or Create an account to join the conversation.

  • Posts: 7
  • Thank you received: 0
My bad I read this too late, I tried several time with a message... Sorry!

You should add a pannel that say this once the message is submitted :-)
3 months 1 week ago #68320

Please Log in or Create an account to join the conversation.

  • Posts: 8
  • Thank you received: 0
I tried posting a new post, but it kept bringing me kept refreshing the posting page with the I am not a robot box. There was or is no indication as to whether my post has been submitted and waiting approval or whether it just hasn't posted at all. Should there be a waiting approval pop up?
2 months 2 weeks ago #69569

Please Log in or Create an account to join the conversation.

  • Posts: 494
  • Thank you received: 100

Replied by Jim on topic New users Please read....thanks

I do not see anything pending, and it appears that you were approved prior, so it should have posted. This was a post itself that worked for you, so not sure what is going on with the I am not a robot bit. You are not a robot, are you? :)
12" pier with HDX110 using EQMod
ASI 1600 mono/color mains with ASI290MM in off-axis
ASI filter wheel
Moonlite focusers for the sharpening
AT115EDT w/.8x for the light
Fedora Linux, 100% INDI
2 months 2 weeks ago #69582

Please Log in or Create an account to join the conversation.

  • Posts: 8
  • Thank you received: 0
That does not compute....robot brain overload :) seems I can reply to posts, but cant create new ones.
2 months 2 weeks ago #69585

Please Log in or Create an account to join the conversation.

  • Posts: 494
  • Thank you received: 100

Replied by Jim on topic New users Please read....thanks

Try a new post in this New User area, and take a screenshot if you can, of the page you cannot get past.

Jim
12" pier with HDX110 using EQMod
ASI 1600 mono/color mains with ASI290MM in off-axis
ASI filter wheel
Moonlite focusers for the sharpening
AT115EDT w/.8x for the light
Fedora Linux, 100% INDI
2 months 2 weeks ago #69616

Please Log in or Create an account to join the conversation.

  • Posts: 956
  • Thank you received: 128
Would it not be possible to have something in place that stops multiple first posts, as I have sorted loads of these out in the last week, people submitting there first post and then when it does not show right away submitting it again and again, on some I have deleted two, three and  four of the same posts....from the same person...one day there were 12 unapproved posts, and from only four different people.....go figure....
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
2 months 2 weeks ago #69622

Please Log in or Create an account to join the conversation.

Time to create page: 0.629 seconds