×

INDI Library v1.9.8 Released (29 Sep 2022)

Bi-monthly INDI Library released with new drivers and bug fixes.

Update causes firmware error

  • Posts: 10
  • Thank you received: 0
I will try your method and see if it works for me.
3 months 6 days ago #85632

Please Log in or Create an account to join the conversation.

  • Posts: 10
  • Thank you received: 0
I found out the update is applied, as i've got the version 3.6.0 compiled on 2022-08-18T23:57:20.
sudo apt-get update && upgrade just tells everyhing is up to date, and without any error.

Sorry to hear it does not work for you

I tried the command line update and it works. Thank you so very much.
3 months 2 days ago #85833

Please Log in or Create an account to join the conversation.

  • Posts: 4
  • Thank you received: 0

Replied by Kyle on topic Update causes firmware error

I had the same issue when I updated via the updater app today. I didn't check here first but I just ended up downloading a new image to get everything back up and running. Good to know about being able to copy ver a boot partition if this happens in the future.
3 months 1 day ago #85839

Please Log in or Create an account to join the conversation.

  • Posts: 6
  • Thank you received: 0
Oooh god what a mess of ""update""!!!
too late for me too, no check the forums before updating... bye new moon weekend, that was a big facepalm.

Im running the 64 bits version from SSD and Rpi4, and for me the copy of boot partition fix not worked, so I flashed a new image, of course loosing all configs...

Without the hassle of reconfiguring everything, now im facing a new problem, before this big fail, for the hard drive to boot using usb 3.0 I used this command in cmdline.txt,
usb-storage.quirks=152d:0578:u

But now if I use this code the SO dont boot, showing the errors of the pic, this force me to use the SSD with the usb 2.0... any hint?



write 100 times: if it works don't update, if it works don't update, if it works don't update....
3 months 20 hours ago #85890
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.557 seconds