Hi.

Just visted the telescope-section from INDI-Lib on GitHub . And found the following:

I wonder, how I can install this driver. I can't find this one in my kstars.

Greetings
Bernd

Oh nice! Will test this with my CEM60

You either have to update to the nightly builds or compile yourself (that's what I do)

(that's for the plain INDI stuff - don't know about the Stellarmate though)

I dont use StellarMate. But in the Nightly-Builds the Drivers are not net included.
Do you have a link to a little HowTo for build and compile it by myself? The environment should be installed. A friend of mine compiled a focuser-driver that he programmed.

Well, as the check-in from Jasem had be at 2am indeed the nightly builds might not yet be up to date
Compiling is basically as easy as calling cmake and make, as described in the readme (I think). It's more about installing without messing up the system packages.
I'm therefore creating real packages with a build script - but I'm using Tumbleweed (RPM based), so that wouldn't help you too much I'm afraid...

Ok. It seems, there is a new indilib. And I'm sure, that there is a HowTo install it from source.But can give some me hint, where I can find the ReadMe?

It's called README.md, likely part of the source tarball, and also what you read when going to github.com/indilib/indi

Yeah. Thank you. I allready found it. But i planned to try it before I changed the post.
<EDIT>
The new CEM40-Driver that is delivered with INDI 1.8.0 seems to work fine.

Yes, communication issue had been fixed by Jasem. But please check what your mount does when parking, cf. indilib.org/forum/mounts/5477-new-ieq-te...arking-position.html