×

INDI Library v1.9.2 Released (14 Sep 2021)

Bimonthly Stable INDI Library release introduces new drivers and fixes for existing ones.

EQMOD will not connect with cable at all

  • Posts: 1063
  • Thank you received: 133
No, just the one PI4, thought about getting another as a spare and a test machine…
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
2 months 3 weeks ago #73054

Please Log in or Create an account to join the conversation.

  • Posts: 52
  • Thank you received: 8
You have done a lot of investigation including using the cables on a NINA Astro, which I'm assuming was on a x86_64 device running Windows. The fact you're saying even INDI drivers from 18 months ago aren't working but you had this working 6 month sounds like a RPi hardware issue. Just because Linux can see the cable, doesn't mean it can talk to it. If you can afford it, get another RPi and try your SD card in that, even if this doesn't solve your issue you will have a backup RPi in case the other dies when you least expect it; I lost a few nights of observing as I had a RPi die on me and I didn't have a backup. I know I had issues with my EQ6 connecting when I put the cable into a USB3 port, and I was tearing my hair out trying to work it out.

Here are some other things I would try to rule out:
* use different USB ports and see if they give different results (if the EQ8 is like the EQ6 then you should be using USB2).
* if you're using a USB hub, even a Pegasus Astro, ditch the hub and plug directly into the RPi and only in the USB2 ports
Plugging a USB2 device into a USB3 bus will still have Linux show that the device is on the USB2 bus, this is how you can plug a USB3 hub in with USB2 ports and the devices show up in lsusb has being on the USB2 bus.

Do you have any other USB2 only devices you could test? For me my only other one is my GPS dongle, all the reset use USB3.
RPI 4 B (4Gb) running Manjaro ARM
Kstars/Ekos
SkyWatcher Esprit 80ED
SkyWatcher EQ6-Pro
ZWO ASI1600MM Pro
ZWO ASI290MM-Mini
ZWO EFW
PrimaLuceLab Sesto Senso 2
Pegasus UPBv2
The following user(s) said Thank You: AstroNerd
2 months 3 weeks ago #73072

Please Log in or Create an account to join the conversation.

  • Posts: 1008
  • Thank you received: 297
Do we have somewhere an excerpt of the "dmesg" command showing which driver the kernel loads when plugging the cable in? Could we have the output of "lsusb - v" to clarify which port is which device (although there is not much doubt here).

-Eric
HEQ5-Pro - Atik 314E - Orion ED80T - DMK21 on Orion 50mm
DIY 3D-printed Moonlite and FWheel RGB/LPR
KStars and indiserver on two Atom 1.6GHz 1GB RAM Linux, VPN remote access
2 months 3 weeks ago #73077

Please Log in or Create an account to join the conversation.

  • Posts: 1063
  • Thank you received: 133
@Eric
this is the port it’s trying to connect to which is correct…the EQMOD mount is online when I first start ekos and INdI, but when it does not connect, it goes offline, (shown below, screen grab of tty time out error) .it’s the FTDI  id on  ttyUSB0 port, the other was the Pegasus hub which I have since disconnected, that works fine… and the mount is now the only device I have plugged in

the cables and the mount are good, the only thing I have not changed is the RPI, have also used six different versions of Stellarmate, Astroberry and just plain raspbian, goimg back 18 months and will not work with any of them, BUT my Bluetooth EQMOD adapter works fine in latest of them all….

 
 
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
Last edit: 2 months 3 weeks ago by AstroNerd.
2 months 3 weeks ago #73080
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 1063
  • Thank you received: 133
One thing I forgot to mention, in case it helps, six months ago when this cable used to work fine with INdI, I used to have it connected to the Pegasus USB hub, and NOT direct into the RPI, this worked fine without issue, so I have also tried that again this time, but still the same issue, will not connect, so not sure if that rules out the RPI as the issue or not…i have since removed the hub so just have the mount connected for testing purposes…
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
2 months 3 weeks ago #73081

Please Log in or Create an account to join the conversation.

  • Posts: 1063
  • Thank you received: 133
Here Is latest DMSEG,  I have the Pegasus hub attached here too, and the EQMOD cable is plugged into the Pegasus hub, this is how it worked fine before, and it does not work when plugged directly to RPI, so worth goi g back to this way as the USB ports have more power on the hub.

armate@stellarmate:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.17-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1421 SMP Thu May 27 14:00:13 BST 2021
[    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000]   Normal   empty
[    0.000000]   HighMem  [mem 0x0000000030000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] On node 0 totalpages: 2015232
[    0.000000]   DMA zone: 2304 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 196608 pages, LIFO batch:63
[    0.000000]   HighMem zone: 1818624 pages, LIFO batch:63
[    0.000000] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920
[    0.000000] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2012928
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=2560 bcm2708_fb.fbheight=1440 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:B6:40:70 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  splash quiet plymouth.ignore-serial-consoles console=tty1 console=ttyS0,115200 root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait logo.nologo usbcore.usbfs_memory_mb=1024
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000020c00000-0x0000000024c00000] (64MB)
[    0.000000] Memory: 7814920K/8060928K available (10240K kernel code, 1358K rwdata, 3160K rodata, 2048K init, 890K bss, 180472K reserved, 65536K cma-reserved, 7274496K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 33942 entries in 67 pages
[    0.000000] ftrace: allocated 67 pages with 3 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]     Rude variant of Tasks RCU enabled.
[    0.000000]     Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=0
[    0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000026] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000086] bcm2835: system timer (irq = 25)
[    0.000734] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000752] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000770] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000785] Switching to timer-based delay loop, resolution 18ns
[    0.001030] Console: colour dummy device 80x30
[    0.001095] printk: console [tty1] enabled
[    0.001151] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[    0.001183] pid_max: default: 32768 minimum: 301
[    0.001351] LSM: Security Framework initializing
[    0.001533] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001558] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.003106] Disabling memory control group subsystem
[    0.003225] CPU: Testing write buffer coherency: ok
[    0.003666] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.004850] Setting up static identity map for 0x200000 - 0x20003c
[    0.005045] rcu: Hierarchical SRCU implementation.
[    0.005949] smp: Bringing up secondary CPUs ...
[    0.007116] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.008442] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.009698] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.009854] smp: Brought up 1 node, 4 CPUs
[    0.009875] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[    0.009890] CPU: All CPU(s) started in HYP mode.
[    0.009904] CPU: Virtualization extensions available.
[    0.010711] devtmpfs: initialized
[    0.024792] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[    0.025009] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.025038] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.027018] pinctrl core: initialized pinctrl subsystem
[    0.028042] NET: Registered protocol family 16
[    0.031955] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.032726] audit: initializing netlink subsys (disabled)
[    0.032980] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
[    0.033530] thermal_sys: Registered thermal governor 'step_wise'
[    0.034355] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.034372] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.034761] Serial: AMBA PL011 UART driver
[    0.067903] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.080822] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-05-27T14:02:15, variant start
[    0.090835] raspberrypi-firmware soc:firmware: Firmware hash is 7d9a298cda813f747b51fe17e1e417e7bf5ca94d
[    0.135494] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.139592] vgaarb: loaded
[    0.140022] SCSI subsystem initialized
[    0.140244] usbcore: registered new interface driver usbfs
[    0.140304] usbcore: registered new interface driver hub
[    0.140375] usbcore: registered new device driver usb
[    0.140735] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.143101] clocksource: Switched to clocksource arch_sys_counter
[    1.143064] VFS: Disk quotas dquot_6.6.0
[    1.143208] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.143368] FS-Cache: Loaded
[    1.143558] CacheFiles: Loaded
[    1.153998] NET: Registered protocol family 2
[    1.154814] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.154867] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.155008] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.155075] TCP: Hash tables configured (established 8192 bind 8192)
[    1.155224] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.155260] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.155528] NET: Registered protocol family 1
[    1.156230] RPC: Registered named UNIX socket transport module.
[    1.156246] RPC: Registered udp transport module.
[    1.156261] RPC: Registered tcp transport module.
[    1.156275] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.156298] PCI: CLS 0 bytes, default 64
[    1.159301] Initialise system trusted keyrings
[    1.159524] workingset: timestamp_bits=14 max_order=21 bucket_order=7
[    1.168049] zbud: loaded
[    1.169992] FS-Cache: Netfs 'nfs' registered for caching
[    1.170710] NFS: Registering the id_resolver key type
[    1.170743] Key type id_resolver registered
[    1.170758] Key type id_legacy registered
[    1.170897] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.171897] Key type asymmetric registered
[    1.171913] Asymmetric key parser 'x509' registered
[    1.172102] bounce: pool size: 64 pages
[    1.172145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.172354] io scheduler mq-deadline registered
[    1.172370] io scheduler kyber registered
[    1.176639] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    1.176670] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    1.176749] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    1.176838] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[    1.235204] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    1.235583] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    1.235604] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.235625] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    1.235711] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    1.235951] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.239434] PCI: bus0: Fast back to back transfers disabled
[    1.239782] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    1.239908] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    1.240341] pci 0000:01:00.0: PME# supported from D0 D3hot
[    1.243850] PCI: bus1: Fast back to back transfers disabled
[    1.243912] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    1.243935] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    1.244016] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.244042] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    1.244456] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[    1.244666] pcieport 0000:00:00.0: PME: Signaling with IRQ 63
[    1.245570] bcm2708_fb soc:fb: FB found 1 display(s)
[    1.307260] Console: switching to colour frame buffer device 320x90
[    1.325584] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 2560x1440
[    1.330611] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    1.331544] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[    1.333997] iproc-rng200 fe104000.rng: hwrng registered
[    1.334292] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.335173] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    1.347242] brd: module loaded
[    1.359476] loop: module loaded
[    1.361087] Loading iSCSI transport class v2.0-870.
[    1.363591] libphy: Fixed MDIO Bus: probed
[    1.365275] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.383177] libphy: bcmgenet MII bus: probed
[    1.483247] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    1.484370] usbcore: registered new interface driver r8152
[    1.484436] usbcore: registered new interface driver lan78xx
[    1.484496] usbcore: registered new interface driver smsc95xx
[    1.530446] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.530487] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    1.533044] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890
[    1.534434] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.534453] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.534470] usb usb1: Product: xHCI Host Controller
[    1.534487] usb usb1: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd
[    1.534503] usb usb1: SerialNumber: 0000:01:00.0
[    1.535240] hub 1-0:1.0: USB hub found
[    1.535340] hub 1-0:1.0: 1 port detected
[    1.536005] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.536033] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    1.536060] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    1.536558] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.536577] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.536594] usb usb2: Product: xHCI Host Controller
[    1.536611] usb usb2: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd
[    1.536627] usb usb2: SerialNumber: 0000:01:00.0
[    1.537345] hub 2-0:1.0: USB hub found
[    1.537419] hub 2-0:1.0: 4 ports detected
[    1.539081] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.539391] dwc_otg: FIQ enabled
[    1.539405] dwc_otg: NAK holdoff enabled
[    1.539420] dwc_otg: FIQ split-transaction FSM enabled
[    1.539438] Module dwc_common_port init
[    1.539881] usbcore: registered new interface driver uas
[    1.539991] usbcore: registered new interface driver usb-storage
[    1.540199] mousedev: PS/2 mouse device common for all mice
[    1.541853] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.545318] sdhci: Secure Digital Host Controller Interface driver
[    1.545334] sdhci: Copyright(c) Pierre Ossman
[    1.546070] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    1.546679] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.550715] ledtrig-cpu: registered to indicate activity on CPUs
[    1.551063] hid: raw HID events driver (C) Jiri Kosina
[    1.551250] usbcore: registered new interface driver usbhid
[    1.551265] usbhid: USB HID core driver
[    1.556631] Initializing XFRM netlink socket
[    1.556673] NET: Registered protocol family 17
[    1.556783] Key type dns_resolver registered
[    1.557289] Registering SWP/SWPB emulation handler
[    1.557491] registered taskstats version 1
[    1.557518] Loading compiled-in X.509 certificates
[    1.558344] Key type ._fscrypt registered
[    1.558361] Key type .fscrypt registered
[    1.558376] Key type fscrypt-provisioning registered
[    1.569880] uart-pl011 fe201000.serial: there is not valid maps for state default
[    1.570193] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    1.570267] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[    1.576770] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[    1.577522] printk: console [ttyS0] disabled
[    1.577656] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 38, base_baud = 68750000) is a 16550
[    1.577853] printk: console [ttyS0] enabled
[    1.578842] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.579908] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    1.579925] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    1.607951] of_cfs_init
[    1.608213] of_cfs_init: OK
[    1.627240] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.628928] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.630613] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.633630] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.635317] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.643196] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    1.644331] Waiting for root device PARTUUID=d9b3f436-02...
[    1.674416] random: fast init done
[    1.701475] mmc1: new high speed SDIO card at address 0001
[    1.747281] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[    1.748216] mmcblk0: mmc0:aaaa SR64G 59.5 GiB
[    1.750413]  mmcblk0: p1 p2
[    1.789221] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.789294] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.805083] devtmpfs: mounted
[    1.813914] Freeing unused kernel memory: 2048K
[    1.823444] Run /sbin/init as init process
[    1.823459]   with arguments:
[    1.823474]     /sbin/init
[    1.823488]     splash
[    1.823502]   with environment:
[    1.823517]     HOME=/
[    1.823530]     TERM=linux
[    1.903156] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.086182] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    2.086204] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.086222] usb 1-1: Product: USB2.0 Hub
[    2.088263] hub 1-1:1.0: USB hub found
[    2.088629] hub 1-1:1.0: 4 ports detected
[    2.233456] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    2.264240] usb 2-2: New USB device found, idVendor=0424, idProduct=5807, bcdDevice= 2.04
[    2.264261] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.264279] usb 2-2: Product: USB5807 Hub
[    2.264296] usb 2-2: Manufacturer: Microchip
[    2.267461] hub 2-2:1.0: USB hub found
[    2.267613] hub 2-2:1.0: 7 ports detected
[    2.284940] systemd[1]: System time before build time, advancing clock.
[    2.383420] NET: Registered protocol family 10
[    2.384813] Segment Routing with IPv6
[    2.433160] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[    2.458879] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.460586] systemd[1]: Detected architecture arm.
[    2.546901] systemd[1]: Set hostname to <stellarmate>.
[    2.564271] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10
[    2.564293] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.564312] usb 1-1.1: Product: USB3.0 802.11ac 1200M Adapter
[    2.564329] usb 1-1.1: Manufacturer: Realtek
[    2.564345] usb 1-1.1: SerialNumber: 123456
[    2.663196] usb 1-1.2: new high-speed USB device number 4 using xhci_hcd
[    2.794888] usb 1-1.2: New USB device found, idVendor=0424, idProduct=2807, bcdDevice= 2.04
[    2.794910] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.794928] usb 1-1.2: Product: USB2807 Hub
[    2.794945] usb 1-1.2: Manufacturer: Microchip
[    2.796980] hub 1-1.2:1.0: USB hub found
[    2.797121] hub 1-1.2:1.0: 7 ports detected
[    3.113171] usb 1-1.2.5: new full-speed USB device number 5 using xhci_hcd
[    3.218989] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid â /run/samba/smbd.pid; please update the unit file accordingly.
[    3.220511] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid â /run/samba/nmbd.pid; please update the unit file accordingly.
[    3.259396] usb 1-1.2.5: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[    3.259418] usb 1-1.2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.259437] usb 1-1.2.5: Product: FT232R USB UART
[    3.259454] usb 1-1.2.5: Manufacturer: FTDI
[    3.259471] usb 1-1.2.5: SerialNumber: AM00M7QG
[    3.373155] usb 1-1.2.7: new full-speed USB device number 6 using xhci_hcd
[    3.391850] random: systemd: uninitialized urandom read (16 bytes read)
[    3.404655] random: systemd: uninitialized urandom read (16 bytes read)
[    3.405318] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.405961] random: systemd: uninitialized urandom read (16 bytes read)
[    3.406471] systemd[1]: Listening on Journal Audit Socket.
[    3.407312] systemd[1]: Listening on Journal Socket.
[    3.415193] systemd[1]: Mounting Kernel Debug File System...
[    3.416878] systemd[1]: Created slice User and Session Slice.
[    3.523578] usb 1-1.2.7: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
[    3.523601] usb 1-1.2.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.523619] usb 1-1.2.7: Product: UPBv2 revB
[    3.523637] usb 1-1.2.7: Manufacturer: Pegasus Astro
[    3.523654] usb 1-1.2.7: SerialNumber: UPB24YVD54
[    3.563020] i2c /dev entries driver
[    4.087242] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    4.185754] systemd-journald[116]: Received request to flush runtime journal from PID 1
[    4.870007] usbcore: registered new interface driver usbserial_generic
[    4.870084] usbserial: USB Serial support registered for generic
[    4.888403] usbcore: registered new interface driver ftdi_sio
[    4.888481] usbserial: USB Serial support registered for FTDI USB Serial Device
[    4.888814] ftdi_sio 1-1.2.5:1.0: FTDI USB Serial Device converter detected
[    4.888979] usb 1-1.2.5: Detected FT232RL
[    4.892628] usb 1-1.2.5: FTDI USB Serial Device converter now attached to ttyUSB0
[    4.892923] ftdi_sio 1-1.2.7:1.0: FTDI USB Serial Device converter detected
[    4.893177] usb 1-1.2.7: Detected FT-X
[    4.898719] usb 1-1.2.7: FTDI USB Serial Device converter now attached to ttyUSB1
[    4.969002] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    4.971109] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    4.971138] [vc_sm_connected_init]: start
[    4.973784] [vc_sm_connected_init]: installed successfully
[    4.998532] mc: Linux media interface: v0.10
[    5.044456] videodev: Linux video capture interface: v2.00
[    5.054608] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    5.068729] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.074650] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    5.085883] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    5.112205] bcm2835_audio bcm2835_audio: card created with 4 channels
[    5.114542] bcm2835_audio bcm2835_audio: card created with 4 channels
[    5.131622] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    5.133243] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    5.134052] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    5.134659] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    5.141034] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    5.141068] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    5.141093] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    5.141117] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    5.141139] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    5.143244] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    5.168662] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    5.168715] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    5.186269] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    5.186332] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    5.202521] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    5.202567] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    5.212507] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[    5.214653] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[    5.223967] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[    5.229644] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[    5.336849] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.485189] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.545526] brcmfmac: F1 signature read @0x18000000=0x15264345
[    5.563352] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.563826] usbcore: registered new interface driver brcmfmac
[    5.586858] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
[    5.826396] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.835746] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan  4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
[    6.486238] 88x2bu: loading out-of-tree module taints kernel.
[    6.721363] rtc-ds1307 1-0068: registered as rtc0
[    7.335052] usbcore: registered new interface driver rtl88x2bu
[    8.370656] random: crng init done
[    8.370672] random: 7 urandom warning(s) missed due to ratelimiting
[    8.476434] zram: Added device: zram0
[    8.484709] zram: Added device: zram1
[    8.489319] zram: Added device: zram2
[    8.492710] zram: Added device: zram3
[    8.526573] zram0: detected capacity change from 0 to 1513443328
[    8.662771] uart-pl011 fe201000.serial: no DMA platform data
[    8.693535] Adding 1477968k swap on /dev/zram0.  Priority:100 extents:1 across:1477968k SSFS
[    8.718399] zram1: detected capacity change from 0 to 1513443328
[    8.843201] Adding 1477968k swap on /dev/zram1.  Priority:100 extents:1 across:1477968k SSFS
[    8.866446] zram2: detected capacity change from 0 to 1513443328
[    9.003197] Adding 1477968k swap on /dev/zram2.  Priority:100 extents:1 across:1477968k SSFS
[    9.013193] zram3: detected capacity change from 0 to 1513443328
[    9.064153] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[    9.153211] Adding 1477968k swap on /dev/zram3.  Priority:100 extents:1 across:1477968k SSFS
[   11.100742] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[   11.101043] bcmgenet fd580000.ethernet eth0: Link is Down
[   11.148173] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   12.140878] start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
[   14.740882] fuse: init (API version 7.32)
[   16.008230] Bluetooth: Core ver 2.22
[   16.008313] NET: Registered protocol family 31
[   16.008321] Bluetooth: HCI device and connection manager initialized
[   16.008742] Bluetooth: HCI socket layer initialized
[   16.008756] Bluetooth: L2CAP socket layer initialized
[   16.008847] Bluetooth: SCO socket layer initialized
[   16.020291] Bluetooth: HCI UART driver ver 2.3
[   16.020303] Bluetooth: HCI UART protocol H4 registered
[   16.020379] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   16.020537] Bluetooth: HCI UART protocol Broadcom registered
[   16.614776] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.614789] Bluetooth: BNEP filters: protocol multicast
[   16.614810] Bluetooth: BNEP socket layer initialized
[   16.676777] Bluetooth: RFCOMM TTY layer initialized
[   16.676801] Bluetooth: RFCOMM socket layer initialized
[   16.676821] Bluetooth: RFCOMM ver 1.11
[   18.316930] start_addr=(0x20000), end_addr=(0x40000), buffer_size=(0x20000), smp_number_max=(16384)
[   18.852474] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 1278.069614] usb 2-2: USB disconnect, device number 2
[ 1278.959679] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 1278.990216] usb 2-2: New USB device found, idVendor=0424, idProduct=5807, bcdDevice= 2.04
[ 1278.990240] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1278.990258] usb 2-2: Product: USB5807 Hub
[ 1278.990275] usb 2-2: Manufacturer: Microchip
[ 1278.992426] hub 2-2:1.0: USB hub found
[ 1278.992543] hub 2-2:1.0: 7 ports detected
stellarmate@stellarmate:~ $ 
 
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
2 months 3 weeks ago #73086

Please Log in or Create an account to join the conversation.

  • Posts: 1063
  • Thank you received: 133
And the output of lsusb -v

  Bus 002 Device 008: ID 0424:5807 Standard Microsystems Corp. 
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x0424 Standard Microsystems Corp.
  idProduct          0x5807 
  bcdDevice            2.04
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x001f
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes           19
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Feedback
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               8
        bMaxBurst               0

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            5.10
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x001f
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0

Bus 001 Device 006: ID 0403:6015 Future Technology Devices International, Ltd Bridge(I2C/SPI/UART/FIFO)
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x0403 Future Technology Devices International, Ltd
  idProduct          0x6015 Bridge(I2C/SPI/UART/FIFO)
  bcdDevice           10.00
  iManufacturer           1 Pegasus Astro
  iProduct                2 UPBv2 revB
  iSerial                 3 UPB24YVD54
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0020
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower               90mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              2 UPBv2 revB
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0000
  (Bus Powered)

Bus 001 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x0403 Future Technology Devices International, Ltd
  idProduct          0x6001 FT232 Serial (UART) IC
  bcdDevice            6.00
  iManufacturer           1 FTDI
  iProduct                2 FT232R USB UART
  iSerial                 3 AM00M7QG
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0020
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower               90mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              2 FT232R USB UART
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0000
  (Bus Powered)

Bus 001 Device 004: ID 0424:2807 Standard Microsystems Corp. 
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         2 TT per port
  bMaxPacketSize0        64
  idVendor           0x0424 Standard Microsystems Corp.
  idProduct          0x2807 
  bcdDevice            2.04
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0029
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      1 Single TT
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      2 TT per port
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12

Bus 001 Device 003: ID 0bda:b812 Realtek Semiconductor Corp. 
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x0bda Realtek Semiconductor Corp.
  idProduct          0xb812 
  bcdDevice            2.10
  iManufacturer           1 
  iProduct                2 
  iSerial                 3 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0035
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           5
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              2 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x06  EP 6 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x08  EP 8 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x2109 VIA Labs, Inc.
  idProduct          0x3431 Hub
  bcdDevice            4.21
  iManufacturer           0 
  iProduct                1 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0019
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            5.10
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0019
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
stellarmate@stellarmate:~ $ 
 
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
2 months 3 weeks ago #73088

Please Log in or Create an account to join the conversation.

  • Posts: 1063
  • Thank you received: 133
This first image shows the mount online when INdI is started, the second image shows the failed connection and the error and no mount is offline, and will not connect…the tire image is the Pegasus hub connected fine….

 
 
 
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
Last edit: 2 months 3 weeks ago by AstroNerd.
2 months 3 weeks ago #73090
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 1063
  • Thank you received: 133
These are the logs from trying to connect the mount with just the INdI EQMOD mount driver running from terminal, as suggested by @ Kevin

2021-07-02T13:30:12.775 BST INFO ][           org.kde.kstars.ekos] - "Connecting to remote INDI server at localhost on port 7624 ..."
[2021-07-02T13:30:12.777 BST DEBG ][           org.kde.kstars.indi] - Adding managed driver "Ekos Remote Host"
[2021-07-02T13:30:12.778 BST DEBG ][           org.kde.kstars.indi] - INDIListener: Adding a new client manager to INDI listener..
[2021-07-02T13:30:12.779 BST DEBG ][           org.kde.kstars.indi] - INDI server connected.
[2021-07-02T13:30:12.779 BST INFO ][           org.kde.kstars.ekos] - "INDI services started. Connection to remote INDI server is successful. Waiting for devices..."
[2021-07-02T13:30:12.784 BST DEBG ][           org.kde.kstars.indi] - Received new device EQMod Mount
[2021-07-02T13:30:13.138 BST DEBG ][           org.kde.kstars.indi] - INDIListener: New device "EQMod Mount"
[2021-07-02T13:30:13.139 BST INFO ][           org.kde.kstars.ekos] - Ekos received a new device:  "EQMod Mount"
[2021-07-02T13:30:13.308 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < CONNECTION >
[2021-07-02T13:30:13.311 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < DRIVER_INFO >
[2021-07-02T13:30:13.317 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < POLLING_PERIOD >
[2021-07-02T13:30:13.321 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < HORIZONTAL_COORD >
[2021-07-02T13:30:13.322 BST INFO ][           org.kde.kstars.ekos] - "EQMod Mount is online."
[2021-07-02T13:30:13.459 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:330:13: QML MouseArea: Detected anchors on an item that is managed by a layout. This is undefined behavior; use Layout.alignment instead.
[2021-07-02T13:30:13.474 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:256: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.474 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:262: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.474 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:270: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.474 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:307: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.475 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:358: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.475 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:376: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.475 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:394: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.475 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:411: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.475 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:428: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.475 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:445: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.475 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:469: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.476 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:529: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.476 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:551: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.476 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:573: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.476 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:589: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.476 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:624: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.476 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:658: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.476 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:695: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.476 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:706: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.477 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:713: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.477 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:729: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.477 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:741: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.477 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:753: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.477 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:765: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.477 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:784: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.477 BST WARN ][                       default] - qrc:/qml/mount/mountbox.qml:793: ReferenceError: xi18n is not defined
[2021-07-02T13:30:13.502 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < GUIDE_RATE >
[2021-07-02T13:30:13.507 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < PULSE_LIMITS >
[2021-07-02T13:30:13.512 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < MOUNTINFORMATION >
[2021-07-02T13:30:13.517 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < STEPPERS >
[2021-07-02T13:30:13.524 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < CURRENTSTEPPERS >
[2021-07-02T13:30:13.529 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < RASTATUS >
[2021-07-02T13:30:13.534 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < DESTATUS >
[2021-07-02T13:30:13.540 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < JULIAN >
[2021-07-02T13:30:13.543 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < TIME_LST >
[2021-07-02T13:30:13.546 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SLEWSPEEDS >
[2021-07-02T13:30:13.550 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < PERIODS >
[2021-07-02T13:30:13.554 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < HEMISPHERE >
[2021-07-02T13:30:13.556 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < TELESCOPE_TRACK_DEFAULT >
[2021-07-02T13:30:13.559 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < REVERSEDEC >
[2021-07-02T13:30:13.561 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < TARGETPIERSIDE >
[2021-07-02T13:30:13.564 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < STANDARDSYNC >
[2021-07-02T13:30:13.569 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < STANDARDSYNCPOINT >
[2021-07-02T13:30:13.578 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SYNCPOLARALIGN >
[2021-07-02T13:30:13.581 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SYNCMANAGE >
[2021-07-02T13:30:13.584 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < BACKLASH >
[2021-07-02T13:30:13.588 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < USEBACKLASH >
[2021-07-02T13:30:13.590 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNSYNCMODE >
[2021-07-02T13:30:13.592 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < AUTOHOME >
[2021-07-02T13:30:13.594 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < AUXENCODER >
[2021-07-02T13:30:13.596 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < AUXENCODERVALUES >
[2021-07-02T13:30:13.600 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ST4_GUIDE_RATE_NS >
[2021-07-02T13:30:13.603 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ST4_GUIDE_RATE_WE >
[2021-07-02T13:30:13.605 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < RA_PPEC_TRAINING >
[2021-07-02T13:30:13.608 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < RA_PPEC >
[2021-07-02T13:30:13.610 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < DE_PPEC_TRAINING >
[2021-07-02T13:30:13.613 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < DE_PPEC >
[2021-07-02T13:30:13.615 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < LED_BRIGHTNESS >
[2021-07-02T13:30:13.618 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SNAPPORT1 >
[2021-07-02T13:30:13.620 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SNAPPORT2 >
[2021-07-02T13:30:13.623 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNDATAFILE >
[2021-07-02T13:30:13.627 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNTELESCOPECOORDS >
[2021-07-02T13:30:13.631 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNDATA >
[2021-07-02T13:30:13.635 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNMODE >
[2021-07-02T13:30:13.638 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNCOUNT >
[2021-07-02T13:30:13.642 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNLIST >
[2021-07-02T13:30:13.644 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNPOINT >
[2021-07-02T13:30:13.653 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SIMULATORWORM >
[2021-07-02T13:30:13.659 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SIMULATORRATIO >
[2021-07-02T13:30:13.665 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SIMULATORMOTOR >
[2021-07-02T13:30:13.672 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SIMULATORMODE >
[2021-07-02T13:30:13.674 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SIMULATORHIGHSPEED >
[2021-07-02T13:30:13.677 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SIMULATORMCVERSION >
[2021-07-02T13:30:13.680 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < HORIZONLIMITSDATAFILE >
[2021-07-02T13:30:13.685 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < HORIZONLIMITSDATAFITS >
[2021-07-02T13:30:13.688 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < HORIZONLIMITSPOINT >
[2021-07-02T13:30:13.692 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < HORIZONLIMITSTRAVERSE >
[2021-07-02T13:30:13.695 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < HORIZONLIMITSMANAGE >
[2021-07-02T13:30:13.697 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < HORIZONLIMITSFILEOPERATION >
[2021-07-02T13:30:13.700 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < HORIZONLIMITSONLIMIT >
[2021-07-02T13:30:13.702 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < HORIZONLIMITSLIMITGOTO >
[2021-07-02T13:30:13.705 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNMENT_POINT_MANDATORY_NUMBERS >
[2021-07-02T13:30:13.715 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNMENT_POINT_OPTIONAL_BINARY_BLOB >
[2021-07-02T13:30:13.719 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNMENT_POINTSET_SIZE >
[2021-07-02T13:30:13.722 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNMENT_POINTSET_CURRENT_ENTRY >
[2021-07-02T13:30:13.725 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNMENT_POINTSET_ACTION >
[2021-07-02T13:30:13.728 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNMENT_POINTSET_COMMIT >
[2021-07-02T13:30:13.730 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNMENT_SUBSYSTEM_MATH_PLUGINS >
[2021-07-02T13:30:13.733 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNMENT_SUBSYSTEM_MATH_PLUGIN_INITIALISE >
[2021-07-02T13:30:13.735 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ALIGNMENT_SUBSYSTEM_ACTIVE >
[2021-07-02T13:30:13.738 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < DEBUG >
[2021-07-02T13:30:13.742 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SIMULATION >
[2021-07-02T13:30:13.745 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < CONFIG_PROCESS >
[2021-07-02T13:30:13.748 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < CONNECTION_MODE >
[2021-07-02T13:30:13.750 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SYSTEM_PORTS >
[2021-07-02T13:30:13.753 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < DEVICE_PORT >
[2021-07-02T13:30:13.756 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < DEVICE_BAUD_RATE >
[2021-07-02T13:30:13.759 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < DEVICE_AUTO_SEARCH >
[2021-07-02T13:30:13.762 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < DEVICE_PORT_SCAN >
[2021-07-02T13:30:13.764 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < ACTIVE_DEVICES >
[2021-07-02T13:30:13.769 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < DOME_POLICY >
[2021-07-02T13:30:13.771 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < TELESCOPE_INFO >
[2021-07-02T13:30:13.781 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < SCOPE_CONFIG_NAME >
[2021-07-02T13:30:13.784 BST INFO ][     org.kde.kstars.ekos.mount] - "Error syncing telescope info. Please fill telescope aperture and focal length."
[2021-07-02T13:30:13.973 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "Error: Invalid range for Aperture (mm) (TELESCOPE_APERTURE). Valid range is from 10 to 5000. Requested value is 1 "
[2021-07-02T13:30:13.975 BST INFO ][           org.kde.kstars.indi] - EQMod Mount :  "[INFO] Saving device configuration... "
[2021-07-02T13:30:13.976 BST INFO ][           org.kde.kstars.indi] - EQMod Mount :  "[INFO] Device configuration saved. "
[2021-07-02T13:30:13.987 BST INFO ][           org.kde.kstars.indi] - EQMod Mount :  "[INFO] Debug is enabled. "
[2021-07-02T13:30:13.987 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < DEBUG_LEVEL >
[2021-07-02T13:30:13.991 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < LOGGING_LEVEL >
[2021-07-02T13:30:13.995 BST DEBG ][           org.kde.kstars.indi] - < EQMod Mount >: < LOG_OUTPUT >
[2021-07-02T13:30:14.157 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[DEBUG] Toggle Debug Level -- Verbose Mount "
[2021-07-02T13:30:14.157 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[DEBUG] Toggle Debug Level -- Verbose Mount "
[2021-07-02T13:30:18.528 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[DEBUG] Connecting to /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AM00M7QG-if00-port0 @ 9600 "
[2021-07-02T13:30:18.529 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[DEBUG] Port FD 3 "
[2021-07-02T13:30:18.530 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[DEBUG] Connection successful, attempting handshake... "
[2021-07-02T13:30:18.530 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[COMM] dispatch_command: \":e1\", 4 bytes written "
[2021-07-02T13:30:23.636 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[COMM] read error, will retry again... "
[2021-07-02T13:30:23.637 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[COMM] dispatch_command: \":e1\", 4 bytes written "
[2021-07-02T13:30:27.949 BST INFO ][           org.kde.kstars.ekos] - "Unable to establish remote device:\n+ CCD Simulator\nPlease ensure remote device name corresponds to actual device name."
[2021-07-02T13:30:28.547 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[COMM] read error, will retry again... "
[2021-07-02T13:30:28.547 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[COMM] dispatch_command: \":e1\", 4 bytes written "
[2021-07-02T13:30:33.551 BST DEBG ][           org.kde.kstars.indi] - INDI server disconnected from BLOB manager for Device: "EQMod Mount" Property: "ALIGNDATA" Exit code: 0
[2021-07-02T13:30:33.553 BST DEBG ][           org.kde.kstars.indi] - INDI server disconnected from BLOB manager for Device: "EQMod Mount" Property: "HORIZONLIMITSDATAFITS" Exit code: 0
[2021-07-02T13:30:33.555 BST INFO ][           org.kde.kstars.indi] - EQMod Mount :  "[ERROR] Error: Communication failed -> tty read failed, check connection: Timeout error "
[2021-07-02T13:30:33.557 BST INFO ][           org.kde.kstars.indi] - EQMod Mount :  "[INFO] EQMod Mount is offline. "
[2021-07-02T13:30:33.557 BST DEBG ][           org.kde.kstars.ekos] - "EQMod Mount"  is disconnected.
[2021-07-02T13:30:33.557 BST INFO ][           org.kde.kstars.ekos] - "EQMod Mount failed to connect.\nPlease ensure the device is connected and powered on."
[2021-07-02T13:30:33.578 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[DEBUG] Handshake failed. "
[2021-07-02T13:30:33.581 BST DEBG ][           org.kde.kstars.ekos] - "EQMod Mount"  is disconnected.
[2021-07-02T13:30:33.582 BST INFO ][           org.kde.kstars.ekos] - "EQMod Mount failed to connect.\nPlease ensure the device is connected and powered on."
[2021-07-02T13:30:35.637 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[DEBUG] Connecting to /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AM00M7QG-if00-port0 @ 9600 "
[2021-07-02T13:30:35.638 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[DEBUG] Port FD 3 "
[2021-07-02T13:30:35.639 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[DEBUG] Connection successful, attempting handshake... "
[2021-07-02T13:30:35.640 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[COMM] dispatch_command: \":e1\", 4 bytes written "
[2021-07-02T13:30:40.576 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[COMM] read error, will retry again... "
[2021-07-02T13:30:40.576 BST DEBG ][           org.kde.kstars.indi] - EQMod Mount : "[COMM] dispatch_command: \":e1\", 4 bytes written "
[2021-07-02T13:30:43.361 BST DEBG ][           org.kde.kstars.indi] - Removing managed driver "Ekos Remote Host"
[2021-07-02T13:30:43.362 BST DEBG ][           org.kde.kstars.indi] - INDIListener: Removing device "EQMod Mount"
[2021-07-02T13:30:43.363 BST DEBG ][           org.kde.kstars.indi] - INDI server disconnected. Exit code: 0
[2021-07-02T13:30:43.363 BST DEBG ][           org.kde.kstars.indi] - INDIListener: Removing client manager for server localhost @ 7624
[2021-07-02T13:30:43.364 BST DEBG ][           org.kde.kstars.ekos] - Resetting Ekos Manager...
[2021-07-02T13:30:43.364 BST DEBG ][           org.kde.kstars.indi] - INDI server disconnected from BLOB manager for Device: "EQMod Mount" Property: "ALIGNMENT_POINT_OPTIONAL_BINARY_BLOB" Exit code: 0
[2021-07-02T13:30:43.367 BST WARN ][                       default] - QSqlDatabasePrivate::removeDatabase: connection 'filter_db' is still in use, all queries will cease to work.
[2021-07-02T13:30:43.367 BST WARN ][                       default] - QSqlDatabasePrivate::addDatabase: duplicate connection name 'filter_db', old connection removed.
[2021-07-02T13:30:43.381 BST INFO ][           org.kde.kstars.ekos] - "INDI services stopped."
 
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
2 months 3 weeks ago #73092

Please Log in or Create an account to join the conversation.

  • Posts: 1008
  • Thank you received: 297
So we agree that "/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AM00M7QG-if00-port0" is the right serial port for the mount, that's one thing.

We saw that there is no reply on the serial port, be it from a serial terminal or the INDI driver.

You mentioned that ASCOM was successful in its connection and usage of the mount (with your Windows laptop?). You mentioned that using Bluetooth was successful too (with your raspberry?).

When you connect the mount to Windows, could you screenshot the serial port system settings parameters (the one from the device manager)?

When you connect the mount to your raspberry, could you execute "stty -F /dev/ttyUSB0 -a" and report the results?

-Eric
HEQ5-Pro - Atik 314E - Orion ED80T - DMK21 on Orion 50mm
DIY 3D-printed Moonlite and FWheel RGB/LPR
KStars and indiserver on two Atom 1.6GHz 1GB RAM Linux, VPN remote access
2 months 3 weeks ago #73114

Please Log in or Create an account to join the conversation.

  • Posts: 1063
  • Thank you received: 133
@Eric

i certainly will, but will be in a week when back from holiday, I go tomorrow for seven days….
And thanks for the continued help…much appreciated, and I really need to get to the bottom of this 

It works perfectly in windows with Ascom and NINA, so I know the mount and cable are good, but the real strange one is tnat the BT adapter works perfectly with INdI…which also probes the mount is good….
 
Stellarmate OS on Raspberry pi4b
Skywatcher EQ8 pro, on steel pier
Takahashi FSQ85, FS60cb & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar x2 Guide Camera
Pegasus Ultimate Hub V2 for all USB & Power
Pegasus focus motors on all scopes
2 months 3 weeks ago #73120

Please Log in or Create an account to join the conversation.

  • Posts: 1008
  • Thank you received: 297
Yeah your problem is the serial communication. "stty" will validate the port configuration is correct compared to Windows. What can happen is that the USB port has an incorrect voltage because of a ground problem somewhere between the Pi and the mount.

-Eric
HEQ5-Pro - Atik 314E - Orion ED80T - DMK21 on Orion 50mm
DIY 3D-printed Moonlite and FWheel RGB/LPR
KStars and indiserver on two Atom 1.6GHz 1GB RAM Linux, VPN remote access
2 months 3 weeks ago #73121

Please Log in or Create an account to join the conversation.

Time to create page: 1.148 seconds