×
INDI Library v1.8.1 Released (09 Sep 2019)

Monthly maintenance release INDI v1.8.1

Mesu Mount 200 Driver Request

7 months 3 weeks ago
Fellside
Fresh Boarder
Fresh Boarder
Posts: 17
More
Topic Author
Mesu Mount 200 Driver Request #35213
Hi
The Indi driver has not appeared yet. There has been talk about a linux version of the software (not Indy) but it seems to be a low priority. I went ahead and brought the Mesu as the Sitech guys told me the Indy driver was only months away. As LAZJEN Says above it very easy to get burned by software promises.
The best thing is to contact the yahoo.com SiTechservo group and post you request there. It may be a good idea to contact Mesu and say that its a deal breaker that you have an Indy driver available before you buy the mount. Loss of sales might do change there minds.
The mesu 200 is very very good and the Sitech driver works well. You wont regret buying one. Its all the Win 10 hassle that you don't need.
Graham

Please Log in or Create an account to join the conversation.

7 months 3 weeks ago
Fellside
Fresh Boarder
Fresh Boarder
Posts: 17
More
Topic Author
Mesu Mount 200 Driver Request #35215
Hi
I have posted a question to the Sitech Yahoo group.
Back it up with a few posts and they may think there is a need for a Indy Driver if the thread is active with requests from prospective users.
Graham

Please Log in or Create an account to join the conversation.

7 months 3 weeks ago
muletopia
Fresh Boarder
Fresh Boarder
Posts: 2
More
Mesu Mount 200 Driver Request #35216
Thanks Fellside
I use sitech on a win 7 laptop, at least that is less painful than win 10. There are only two other reasons I have Windows, Sharpcap and PHD2. I would dearly like to replace PHD2 with EKOS.
With an INDI deiver I would only have to boot Win 7 for Sharpcap.

As it is I find that having built a Sitech 40 star sky map and use all terms good go to and tracking is the norm. EKOS woild improve my guiding life by a large margin.
Graham I just saw your post. Good idea but joining yahoo groups with no cell phone coverage is a not practical. I have tried and managed to do so (Mesu mount group) but input there after is impossible.

Chris

Please Log in or Create an account to join the conversation.

7 months 3 weeks ago
Fellside
Fresh Boarder
Fresh Boarder
Posts: 17
More
Topic Author
Mesu Mount 200 Driver Request #35219
Hi Chris
I think you can use PHD2 instead of the EKOS internal guider. Please try to post to the Sitech group. The more requests the better.
I miss using my Raspberry pi`s with EKOS and the reliability of Linux. I am on Win 10 and have been caught out by Win updates:(
Graham

Please Log in or Create an account to join the conversation.

7 months 3 weeks ago
Fellside
Fresh Boarder
Fresh Boarder
Posts: 17
More
Topic Author
Mesu Mount 200 Driver Request #35299
Ok
If you read the Yahoo group you will see that Dan Gray the Sitech developer has published files and a walk through of how he installed the driver. He has requested help/volunteers with making the files easier to install for the average user.
So it looks like its almost there. So if you have any experience of Indi drivers and getting them ready to install. There is a Github to go to.
github.com/JeffRossMT/sitech-indi-driver
regards
Graham

Please Log in or Create an account to join the conversation.

7 months 3 weeks ago
lazjen
Gold Boarder
Gold Boarder
Posts: 196
More
Mesu Mount 200 Driver Request #35304
Interesting developments.

I looked at the repo, and saw this file: github.com/JeffRossMT/sitech-indi-driver...ope_sitechReadMe.txt

Point 4 is interesting - it seems to imply you need to run an app somewhere on the network on what I assume is a windows box. Am I wrong?

Please Log in or Create an account to join the conversation.

7 months 3 weeks ago
knro
Administrator
Administrator
Posts: 7280
Karma: 51
Mesu Mount 200 Driver Request #35318
Right, I already opened an issue there. I was excited first to see a "simple" command set, then realized this depends on some Windows app, so we're back to square 1.

There is documentation for the serial low level interface, but developing a driver for this without hardware would be very difficult if not impossible.

Can anyone send me the contact information for sidereal technology to see if I can reach some arrangement with them?

Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info

Please Log in or Create an account to join the conversation.

7 months 3 weeks ago
Fellside
Fresh Boarder
Fresh Boarder
Posts: 17
More
Topic Author
Mesu Mount 200 Driver Request #35319
Hi Jasem,

Have you looked at the Yahoo group groups.yahoo.com/neo/groups/SiTechservo/info

There is a walk through on how to set the driver up but as you say it mentions

" Run SiTechExe on any machine on your local intra-net. Make sure it’s initialized.
Make sure you know the INDI port number in the SiTechExe configuration.
In SiTechExe, It’s on the misc tab in the /config/change config/ on the lower left part of the page.
You can change it if you want."

SiTechExe mentioned appears to be on a Win machine. I can confirm that the Indi pot number tab already exists on my Win version of SiTechExe. This need clarifying with Dan Gray.

Dan Gray Sitech is on
This email address is being protected from spambots. You need JavaScript enabled to view it.

Regards
Graham

Please Log in or Create an account to join the conversation.

7 months 3 weeks ago
knro
Administrator
Administrator
Posts: 7280
Karma: 51
Mesu Mount 200 Driver Request #35321
Thanks, I just emailed Dan about this.

Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info

Please Log in or Create an account to join the conversation.

7 months 1 week ago
knro
Administrator
Administrator
Posts: 7280
Karma: 51
Mesu Mount 200 Driver Request #35797
So an update: I received a response from Dan and thankfully he explained everything in details. The SciTechExe can run on Linux (and RPI3), so it's not a huge issue anymore especially since the software supports a lot of features already. So we'll put together a guide for users on how to use INDI+SciTechExe. I'll probably also revise Jeff's driver to be more inline with INDI standards.

Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info

Please Log in or Create an account to join the conversation.

7 months 1 week ago
Fellside
Fresh Boarder
Fresh Boarder
Posts: 17
More
Topic Author
Mesu Mount 200 Driver Request #35861
Hi Jasem,
That`s great news.
Many thanks for your help in getting this sorted.
Have you any idea how the driver will be distributed? Will it be listed on the Indy site?
Many thanks for all your work on INDI.
Regards
Graham

Please Log in or Create an account to join the conversation.

5 months 1 week ago
Fellside
Fresh Boarder
Fresh Boarder
Posts: 17
More
Topic Author
Mesu Mount 200 Driver Request #38870
Hi Jasem,

Did anything further happen with the Sitec/Mesu driver? There has been no change to the Git or mention of it on the Sitech Yahoo group. I have been looking at the Indi device list but it has not appeared there yet.

Many thanks

Graham

Please Log in or Create an account to join the conversation.

Time to create page: 0.902 seconds