×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

INDI Driver for SVBONY cameras

  • Posts: 3
  • Thank you received: 0
I can do the debug for Raspberry this week and send the logs. Can you clarify "MP?" Sorry, not tracking the acronym.
3 years 2 months ago #65866
The topic has been locked.
  • Posts: 149
  • Thank you received: 31
<< Can you clarify "MP?" >>

Sorry, my fault. French habit "Message Privé" = "Private Message".
Or just attach your log file to your post in the topic.

Regards,
3 years 2 months ago #65873
The topic has been locked.
  • Posts: 215
  • Thank you received: 16
Just a word of note regarding PM's on this Forum.... The Forum software does not alert or notify when you have a PM (or MP) waiting. You have to physically go to "Profile" and then click Private Messages to see if there are any and to respond.

This has caught more than a few unaware in recent memory.
3 years 2 months ago #65887
The topic has been locked.
  • Posts: 238
  • Thank you received: 15

Replied by Tom on topic INDI Driver for SVBONY cameras


Hi,

This is the debug log when I use kstars guide and start looping with 1sec exposure.

[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1".
[New Thread 0xaf6820a0 (LWP 27151)]
[New Thread 0xa9ea30a0 (LWP 27176)]
[New Thread 0xa96a20a0 (LWP 27177)]
[New Thread 0xa8aff0a0 (LWP 27178)]
[New Thread 0xa82fe0a0 (LWP 27179)]
[New Thread 0xa78ff0a0 (LWP 27180)]
[New Thread 0xa6eff0a0 (LWP 27181)]
[New Thread 0xa64ff0a0 (LWP 27182)]
[New Thread 0xa5cfe0a0 (LWP 27183)]
[New Thread 0xa54fd0a0 (LWP 27188)]
[New Thread 0xa49210a0 (LWP 27198)]
[New Thread 0xa29200a0 (LWP 27199)]
[New Thread 0xa091f0a0 (LWP 27200)]
[New Thread 0x9d67e0a0 (LWP 27517)]
[New Thread 0x9c0e90a0 (LWP 27547)]
[New Thread 0x9b8e80a0 (LWP 27548)]
[New Thread 0x9b0e70a0 (LWP 27549)]
[New Thread 0x9a8e60a0 (LWP 27550)]
[New Thread 0x9a0e50a0 (LWP 27551)]
[New Thread 0x992900a0 (LWP 27552)]
[New Thread 0x9728f0a0 (LWP 27557)]
[New Thread 0x96a8e0a0 (LWP 27558)]
[New Thread 0x9628d0a0 (LWP 27559)]
[Thread 0x9728f0a0 (LWP 27557) exited]
[Thread 0x9c0e90a0 (LWP 27547) exited]
[Thread 0x9a8e60a0 (LWP 27550) exited]
[Thread 0xa091f0a0 (LWP 27200) exited]
[Thread 0xa49210a0 (LWP 27198) exited]
[Thread 0x992900a0 (LWP 27552) exited]
[Thread 0xa29200a0 (LWP 27199) exited]
[Thread 0x9628d0a0 (LWP 27559) exited]
[Thread 0x9b8e80a0 (LWP 27548) exited]

As you can see the exposure will exit and kstars will try to restart the exposure but failed.

Hope this help.
3 years 2 months ago #65901
The topic has been locked.
  • Posts: 84
  • Thank you received: 0

Replied by Pep on topic INDI Driver for SVBONY cameras

Dear folks,
Just today I receive (2'5 mounts later) the SV-305Pro.
I want to check it, at the beginning on the computer (by Ubuntu 20.xxx) and then on raspi4 (astroberry). But I don't know how to install the driver. Someone could help to explain me, step by step, how to do it? Which file I need to download and then how to install.
(github.com/thx8411/indi-3rdparty/tree/master/libsv305 and github.com/thx8411/indi-3rdparty/tree/master/indi-sv305)
Thanks a lot,
Pep
3 years 2 months ago #65933
The topic has been locked.
  • Posts: 238
  • Thank you received: 15

Replied by Tom on topic INDI Driver for SVBONY cameras


Hi Thx8411,

since you already receive the sample SV305 PRO, do you mind to get a Raspberry Pi 4 to further debug the issue as well? This thread seems very slow in progress. :( No hurt feeling.

Best regards,
Tom
Last edit: 3 years 2 months ago by Tom.
3 years 2 months ago #65951
The topic has been locked.
  • Posts: 149
  • Thank you received: 31
Hello Cirera,

If you allready have the indi repository installed, you just have to get the libsv305 and indi-sv305 packages :

"sudo apt install libsv305 indi-sv305"

Best regards,

Thx8411
3 years 2 months ago #65956
The topic has been locked.
  • Posts: 149
  • Thank you received: 31
Hello Tom,

And do you want me to cook something for you aswell ?
Concerning the slow progress, I have a full time job, 2 children and a wife, with health issues...
Your logs doesn't help anyway.

Jared gave me some interesting logs :

<<
[2021-01-13T18:37:32.604 EST INFO ][ org.kde.kstars.indi] - SVBONY SV305PRO 0 : "[INFO] Streaming started "
[2021-01-13T18:37:32.789 EST INFO ][ org.kde.kstars.ekos] - "SVBONY SV305PRO 0 is offline."
>>

It could be a power issue, or an SDK issue.
AstroDMX seems to work.
I checked, AstroDMX use the same SDK binary as me, so it should be related to the way I use the SDK, but only on the armv8 arch.
Sadly, AstroDMX isn't open source, I can't see how they use the SDK.

Please check the "libSVBCameraSDK.so" file. In the last driver, It should be 2229568 bytes long.

@all
Every RPi4 owner have the same issue, or just Tom and Jared ?

Thx8411
The following user(s) said Thank You: Tom, Mark
3 years 2 months ago #65958
The topic has been locked.
  • Posts: 238
  • Thank you received: 15

Replied by Tom on topic INDI Driver for SVBONY cameras


Sorry to hear about your health issues. The log actually is generated from Ekos Debugger. Maybe I tested it in wrong ways.

The easiest and direct ways is set a time for teamviewer session to tackle the issue. :)

Regards,
Tom
3 years 2 months ago #65959
The topic has been locked.
  • Posts: 84
  • Thank you received: 0

Replied by Pep on topic INDI Driver for SVBONY cameras

Hi Thx8411,
First of all take care about your family and you. A big hug.

About the camera:
Thanks, I succeed to install but when I try it (on PC) to connect, told me:

"2021-01-15T10: 05: 22 Could not set:
+ SVBONY SV305
Please make sure the device is connected and working"

And the camera are connected on a USB3.
I tried to do it by INDI-Webcam driver , detect that I have a video0 and video1 (the last is the svBony camera) but I can't succeed that the INDI-Panel runs on this option.
Have any Idea?
{On raspi4 i would like to test it when I'll did run on a PC}
Thanks
Pep
3 years 2 months ago #65961
The topic has been locked.
  • Posts: 149
  • Thank you received: 31
Hello,

Thanks for you kind words.

When you plug your camera, please execute "dmesg" in a terminal. You should have something like that :

<<
[ 81.119293] usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 81.139955] usb 2-1: LPM exit latency is zeroed, disabling LPM.
[ 81.140789] usb 2-1: New USB device found, idVendor=f266, idProduct=9a0a, bcdDevice= 0.00
[ 81.140790] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 81.140791] usb 2-1: Product: SVBONY SV305PRO
[ 81.140792] usb 2-1: Manufacturer: SVBONY
>>

Please also check if you have this file : "/lib/udev/rules.d/90-svbonyusb.rules"
Did you reboot after the installation ?

@Tom

You could try "dmesg" aswell, just after your camera crashs. If you have something like have :

<< [ 272.149271] usb 2-1: USB disconnect, device number 3 >>

It could be a power issue. Did you try to connect your camera through a powered usb hub ?
Do you have some logs from AstroDMX ?

Best regards,

Thx8411
3 years 2 months ago #65987
The topic has been locked.
  • Posts: 10
  • Thank you received: 1
I don't know if this will help but I use a powered usb hub with my rpi4. Also I have to disconnect the camera before I start the rpi4, then connect it when the rpi4 is at the desktop. Other wise it will not connect to indi. Sometimes I can just unplug it and plug it back in to resolve communication issues. It may have to do with the camera powering up before the rpi4 because of the powered usb hub.

I was having the same issues with hanging but I don't know if it was a faulty camera or if I needed a powered usb hub. My first camera did die. The replacement had the same issues as the people above, but went away when I replaced the rpi4 with a new one.

Sent from my moto g(7) using Tapatalk
3 years 2 months ago #66064
The topic has been locked.
Time to create page: 0.587 seconds