INDI_server 2.0.11
From Command Line using this INDI_server

indi_setprop iEQ.CONFIG_PROCESS.CONFIG_LOAD=Off
Set debug to on and output to file but I don't see file updating.
indi_setprop  iEQ.CONNECTION.CONNECT=On
indi_getprop -v
-------
 looking for *.*.*
 Connected to localhost on port 7624
 Queried properties from *
 iEQ.CONNECTION.CONNECT=On
 iEQ.CONNECTION.DISCONNECT=Off
 iEQ.DRIVER_INFO.DRIVER_NAME=iEQ
 iEQ.DRIVER_INFO.DRIVER_EXEC=indi_ieq_telescope
 iEQ.DRIVER_INFO.DRIVER_VERSION=1.0
 iEQ.DRIVER_INFO.DRIVER_INTERFACE=5
 iEQ.DEBUG.ENABLE=On
 iEQ.DEBUG.DISABLE=Off
 iEQ.SIMULATION.ENABLE=Off
 iEQ.SIMULATION.DISABLE=On
 iEQ.CONFIG_PROCESS.CONFIG_LOAD=Off
 iEQ.CONFIG_PROCESS.CONFIG_SAVE=Off
 iEQ.CONFIG_PROCESS.CONFIG_DEFAULT=Off
 iEQ.DEVICE_PORT.PORT=/dev/cu.usbserial
 iEQ.DEBUG_LEVEL.DBG_ERROR=On
 iEQ.DEBUG_LEVEL.DBG_WARNING=On
 iEQ.DEBUG_LEVEL.DBG_SESSION=On
 iEQ.DEBUG_LEVEL.DBG_DEBUG=Off
 iEQ.DEBUG_LEVEL.DBG_EXTRA_1=Off
 iEQ.LOGGING_LEVEL.LOG_ERROR=On
 iEQ.LOGGING_LEVEL.LOG_WARNING=On
 iEQ.LOGGING_LEVEL.LOG_SESSION=On
 iEQ.LOGGING_LEVEL.LOG_DEBUG=On
 iEQ.LOGGING_LEVEL.LOG_EXTRA_1=Off
 iEQ.LOG_OUTPUT.CLIENT_DEBUG=On
 iEQ.LOG_OUTPUT.FILE_DEBUG=On
 iEQ.ON_COORD_SET.TRACK=On
 iEQ.ON_COORD_SET.SLEW=Off
 iEQ.ON_COORD_SET.SYNC=Off
 iEQ.EQUATORIAL_EOD_COORD.RA=13.027552777777778203
 iEQ.EQUATORIAL_EOD_COORD.DEC=90
 iEQ.TELESCOPE_ABORT_MOTION.ABORT=Off
 iEQ.TELESCOPE_MOTION_NS.MOTION_NORTH=Off
 iEQ.TELESCOPE_MOTION_NS.MOTION_SOUTH=Off
 iEQ.TELESCOPE_MOTION_WE.MOTION_WEST=Off
 iEQ.TELESCOPE_MOTION_WE.MOTION_EAST=Off
 iEQ.TIME_UTC.UTC=
 iEQ.TIME_UTC.OFFSET=
 iEQ.GEOGRAPHIC_COORD.LAT=40
 iEQ.GEOGRAPHIC_COORD.LONG=255
 iEQ.GEOGRAPHIC_COORD.ELEV=0
 iEQ.TELESCOPE_PARK.PARK=Off
 iEQ.TELESCOPE_PARK.UNPARK=On
 iEQ.TELESCOPE_PARK_POSITION.PARK_RA=14.693056000000000338
 iEQ.TELESCOPE_PARK_POSITION.PARK_DEC=0
 iEQ.TELESCOPE_PARK_OPTION.PARK_CURRENT=Off
 iEQ.TELESCOPE_PARK_OPTION.PARK_DEFAULT=Off
 iEQ.TELESCOPE_PARK_OPTION.PARK_WRITE_DATA=Off
 iEQ.TELESCOPE_INFO.TELESCOPE_APERTURE=200
 iEQ.TELESCOPE_INFO.TELESCOPE_FOCAL_LENGTH=804
 iEQ.TELESCOPE_INFO.GUIDER_APERTURE=80
 iEQ.TELESCOPE_INFO.GUIDER_FOCAL_LENGTH=500
 iEQ.HOME.Find Home=Off
 iEQ.HOME.Set current as Home=Off
 iEQ.HOME.Go to Home=Off
 iEQ.TELESCOPE_TRACK_RATE.TRACK_SIDEREAL=On
 iEQ.TELESCOPE_TRACK_RATE.TRACK_SOLAR=Off
 iEQ.TELESCOPE_TRACK_RATE.TRACK_LUNAR=Off
 iEQ.TELESCOPE_TRACK_RATE.TRACK_CUSTOM=Off
 iEQ.TELESCOPE_SLEW_RATE.SLEW_GUIDE=Off
 iEQ.TELESCOPE_SLEW_RATE.2x=Off
 iEQ.TELESCOPE_SLEW_RATE.SLEW_CENTERING=Off
 iEQ.TELESCOPE_SLEW_RATE.4x=Off
 iEQ.TELESCOPE_SLEW_RATE.SLEW_FIND=Off
 iEQ.TELESCOPE_SLEW_RATE.6x=Off
 iEQ.TELESCOPE_SLEW_RATE.7x=Off
 iEQ.TELESCOPE_SLEW_RATE.8x=Off
 iEQ.TELESCOPE_SLEW_RATE.SLEW_MAX=On
 iEQ.CUSTOM_RATE.CUSTOM_RATE=0
 iEQ.TELESCOPE_TIMED_GUIDE_NS.TIMED_GUIDE_N=0
 iEQ.TELESCOPE_TIMED_GUIDE_NS.TIMED_GUIDE_S=0
 iEQ.TELESCOPE_TIMED_GUIDE_WE.TIMED_GUIDE_E=0
 iEQ.TELESCOPE_TIMED_GUIDE_WE.TIMED_GUIDE_W=0
 iEQ.GUIDE_RATE.GUIDE_RATE=0.9000000000000000222
 iEQ.Firmware Info.Model=iEQ45 Pro
 iEQ.Firmware Info.Board=140822
 iEQ.Firmware Info.Controller=140825
 iEQ.Firmware Info.RA=140822
 iEQ.Firmware Info.DEC=140822
 iEQ.GPS_STATUS.Off=Off
 iEQ.GPS_STATUS.On=Off
 iEQ.GPS_STATUS.Data OK=On
 iEQ.TIME_SOURCE.RS232=Off
 iEQ.TIME_SOURCE.Controller=On
 iEQ.TIME_SOURCE.GPS=Off
 iEQ.HEMISPHERE.South=Off
 iEQ.HEMISPHERE.North=On
 iEQ.DEVICE_PORT.PORT=/dev/cu.usbserial
 iEQ.ON_COORD_SET.TRACK=On
 iEQ.ON_COORD_SET.SLEW=Off
 iEQ.ON_COORD_SET.SYNC=Off
 iEQ.EQUATORIAL_EOD_COORD.RA=13.027552777777778203
 iEQ.EQUATORIAL_EOD_COORD.DEC=90
 iEQ.TELESCOPE_ABORT_MOTION.ABORT=Off
 iEQ.TIME_UTC.UTC=
 iEQ.TIME_UTC.OFFSET=
 iEQ.GEOGRAPHIC_COORD.LAT=40
 iEQ.GEOGRAPHIC_COORD.LONG=255
 iEQ.GEOGRAPHIC_COORD.ELEV=0
 iEQ.TELESCOPE_PARK.PARK=Off
 iEQ.TELESCOPE_PARK.UNPARK=On
 iEQ.TELESCOPE_PARK_POSITION.PARK_RA=14.693056000000000338
 iEQ.TELESCOPE_PARK_POSITION.PARK_DEC=0
 iEQ.TELESCOPE_PARK_OPTION.PARK_CURRENT=Off
 iEQ.TELESCOPE_PARK_OPTION.PARK_DEFAULT=Off
 iEQ.TELESCOPE_PARK_OPTION.PARK_WRITE_DATA=Off
 iEQ.TELESCOPE_MOTION_NS.MOTION_NORTH=Off
 iEQ.TELESCOPE_MOTION_NS.MOTION_SOUTH=Off
 iEQ.TELESCOPE_MOTION_WE.MOTION_WEST=Off
 iEQ.TELESCOPE_MOTION_WE.MOTION_EAST=Off
 iEQ.TELESCOPE_INFO.TELESCOPE_APERTURE=200
 iEQ.TELESCOPE_INFO.TELESCOPE_FOCAL_LENGTH=804
 iEQ.TELESCOPE_INFO.GUIDER_APERTURE=80
 iEQ.TELESCOPE_INFO.GUIDER_FOCAL_LENGTH=500
 --------
Note: After Connecting, then doing a 'Load', seetings are present for
GEOGRAPHIC_COORD. and TELSECOPE_INFO.   

UTC and UTC offset were not captured from the Mount.

I can't figure out how to execute any of these from the command line.
For example 
iEQ.HOME.Find Home=Off
iEQ.HOME.Set current as Home=Off
iEQ.HOME.Go to Home=Off

For example:

indi_setprop 'iEQ.HOME.Find Home=On'
Malformed assignment: Find
Purpose: set one or more writable INDI properties
$Revision: 1.6 $
Usage: indi_setprop [options] {[type] spec} ...
Options:
  -d f  : use file descriptor f already open to server
  -h h  : alternate host, default is localhost
  -p p  : alternate port, default is 7624
  -t t  : max time to wait, default is 2 secs
  -v    : verbose (more are cumulative)
Each spec optionally preceded by its type is sent without first
confirming
its structure. This is much ...