I have some weird phenomena since I installed the latest Kstars, Ekos, indi. Yesterday I played with the autoguiding, so I didn't take pictures with the big chip in the camera, only the autoguiding chip. Camera is a ST8XME (dual chip). I think using the guiding chip is somehow blocking the reading from the main chip in the software. When I take an image on the guidechip... It works. When I take an image using the main chip... he stalls. Basically, I have the following scenarios: 1) Take flats. Go to wall postition (just position in the sky), and take flats, with ADU value 6400. No fits viewer that is started... In the ekos main log, he only shows "capture in progress". 2016-09-13T20:28:59.841 - DEBG - Scheduler: "Found candidate job testster (Priority #10)." 2016-09-13T20:29:00.884 - DEBG - Scheduler: Checking INDI State... 2016-09-13T20:29:00.885 - DEBG - Scheduler: Checking INDI Properties... 2016-09-13T20:29:01.892 - DEBG - Scheduler: Checking INDI State... 2016-09-13T20:29:02.700 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (31.2751) setpointTemp (20.5791) power (0) " 2016-09-13T20:29:02.704 - DEBG - SBIG CCD : "ccdTemp: 31.2751 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:29:02.894 - DEBG - Scheduler: Get next action... 2016-09-13T20:29:02.896 - DEBG - ISD:Telescope: Sending coords RA 22.7248 DEC 26.4109 2016-09-13T20:29:02.898 - DEBG - Capture: "Mount slewing to wall position..." 2016-09-13T20:29:02.902 - DEBG - Scheduler: "testster capture is in progress..." 2016-09-13T20:29:02.911 - DEBG - EQMod Mount : "Starting Goto RA=22.7248 DE=26.4109 (current RA=22.6626 DE=31.5757) " 2016-09-13T20:29:02.939 - DEBG - EQMod Mount : "GOTO ALign Nearest: delta RA = 0.023200, delta DEC = 5.164800 " 2016-09-13T20:29:02.942 - DEBG - EQMod Mount : "Aligned Eqmod Goto RA=22.748 DE=31.5757 (target RA=22.7248 DE=26.4109) " 2016-09-13T20:29:02.944 - DEBG - EQMod Mount : "Setting Eqmod Goto RA=22.748 DE=31.5757 (target RA=22.7248 DE=26.4109) " 2016-09-13T20:29:02.953 - DEBG - EQMod Mount : "Slewing mount: RA increment = -32733, DE increment = 0 " 2016-09-13T20:29:03.046 - DEBG - EQMod Mount : "Slewing to RA: 22:43:29 - DEC: 26:24:39 " 2016-09-13T20:29:07.468 - DEBG - EQMod Mount : "Iterative Goto (1): RA diff = 3.81 arcsecs DE diff = 0.13 arcsecs " 2016-09-13T20:29:07.568 - DEBG - EQMod Mount : "Telescope slew is complete. Tracking TRACK_SIDEREAL... " 2016-09-13T20:29:07.701 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (31.2751) setpointTemp (20.5791) power (0) " 2016-09-13T20:29:07.703 - DEBG - SBIG CCD : "ccdTemp: 31.2751 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:29:08.909 - DEBG - Capture: "Slew to wall position complete." 2016-09-13T20:29:08.913 - DEBG - Capture: "Capturing image..." 2016-09-13T20:29:08.918 - DEBG - SBIG CCD : "Taking 1s exposure on main camera... " 2016-09-13T20:29:08.922 - DEBG - SBIG CCD : "Exposure params for CCD (0) openShutter(1), exposureTime (100), binnig (0), left (0), top (0), w(1530), h(1020) " 2016-09-13T20:29:09.625 - DEBG - SBIG CCD : "Flat Frame exposure in progress... " 2016-09-13T20:29:09.702 - DEBG - SBIG CCD : "Primary camera exposure in progress with 0 seconds left... " 2016-09-13T20:29:10.706 - DEBG - SBIG CCD : "Primary camera exposure in progress with 0 seconds left... " 2016-09-13T20:29:11.981 - DEBG - SBIG CCD : "Primay camera exposure done, downloading image... " 2016-09-13T20:29:11.984 - DEBG - SBIG CCD : "Primary camera readout in progress... " 2016-09-13T20:29:16.376 - DEBG - SBIG CCD : "[b]Primary camera readout complete "[/b] 2016-09-13T20:29:16.588 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (31.2751) setpointTemp (20.5791) power (0) " 2016-09-13T20:29:16.590 - DEBG - SBIG CCD : "ccdTemp: 31.2751 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:29:21.592 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (31.2751) setpointTemp (20.5791) power (0) " 2016-09-13T20:29:21.596 - DEBG - SBIG CCD : "ccdTemp: 31.2751 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:29:26.595 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (31.2751) setpointTemp (20.5791) power (0) " 2) Goto object and track, focus, align. Here too he doesn't start the fits viewer for preview. In fact... it seems like nothing happens and the program is stuck in the "focus stage". 2016-09-13T20:35:10.395 - DEBG - Scheduler: Slewing Stage... Slew Status is Busy 2016-09-13T20:35:11.395 - DEBG - Scheduler: Slewing Stage... Slew Status is Busy 2016-09-13T20:35:11.807 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (31.2751) setpointTemp (20.5791) power (0) " 2016-09-13T20:35:11.811 - DEBG - SBIG CCD : "ccdTemp: 31.2751 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:35:12.266 - DEBG - EQMod Mount : "Iterative Goto (1): RA diff = 4.40 arcsecs DE diff = 0.12 arcsecs " 2016-09-13T20:35:12.332 - DEBG - EQMod Mount : "Telescope slew is complete. Tracking TRACK_SIDEREAL... " 2016-09-13T20:35:12.395 - DEBG - Scheduler: Slewing Stage... Slew Status is Busy 2016-09-13T20:35:13.395 - DEBG - Scheduler: Slewing Stage... Slew Status is Ok 2016-09-13T20:35:13.395 - DEBG - Scheduler: "testster slew is complete." 2016-09-13T20:35:13.398 - DEBG - Scheduler: Get next action... 2016-09-13T20:35:13.400 - DEBG - Focus: Starting focus with box size: 64 Step Size: 50 Threshold: 150 Tolerance: 0.8 Frames: 1 Maximum Travel: 10000 2016-09-13T20:35:13.401 - DEBG - Focus: "Autofocus in progress..." 2016-09-13T20:35:13.403 - DEBG - Focus: "Capturing image..." 2016-09-13T20:35:13.406 - DEBG - Scheduler: "Focusing testster ..." 2016-09-13T20:35:13.414 - DEBG - SBIG CCD : "Taking 1s exposure on main camera... " 2016-09-13T20:35:13.445 - DEBG - SBIG CCD : "Exposure params for CCD (0) openShutter(1), exposureTime (100), binnig (0), left (0), top (0), w(1530), h(1020) " 2016-09-13T20:35:14.120 - DEBG - SBIG CCD : "Light Frame exposure in progress... " 2016-09-13T20:35:14.125 - DEBG - SBIG CCD : "Primary camera exposure in progress with 1 seconds left... " 2016-09-13T20:35:14.395 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:15.125 - DEBG - SBIG CCD : "Primary camera exposure in progress with 0 seconds left... " 2016-09-13T20:35:15.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:16.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:16.402 - DEBG - SBIG CCD : "Primay camera exposure done, downloading image... " 2016-09-13T20:35:16.407 - DEBG - SBIG CCD : "Primary camera readout in progress... " 2016-09-13T20:35:17.395 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:18.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:19.393 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:20.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:20.802 - DEBG - SBIG CCD : [b] "Primary camera readout complete "[/b] 2016-09-13T20:35:21.014 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (31.2751) setpointTemp (20.5791) power (0) " 2016-09-13T20:35:21.018 - DEBG - SBIG CCD : "ccdTemp: 31.2751 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:35:21.395 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:22.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:23.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:24.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:25.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:26.017 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:35:26.020 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:35:26.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:27.395 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:28.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:29.395 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:30.395 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:31.021 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (31.2751) setpointTemp (20.5791) power (0) " 2016-09-13T20:35:31.025 - DEBG - SBIG CCD : "ccdTemp: 31.2751 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:35:31.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:32.395 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:33.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:34.395 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:35.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:36.023 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (31.2751) setpointTemp (20.5791) power (0) " 2016-09-13T20:35:36.027 - DEBG - SBIG CCD : "ccdTemp: 31.2751 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:35:36.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:37.395 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:38.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:39.395 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:40.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:41.027 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:35:41.031 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:35:41.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:42.394 - DEBG - Scheduler: Focus stage... 2016-09-13T20:35:43.394 - DEBG - Scheduler: Focus stage... 3) On the other hand, when I use the guidechip... it seems to work! When I do "goto object" and only select the "guide" option, then he DOES start the fits viewer and continue with the program. 2016-09-13T20:42:54.904 - DEBG - Scheduler: "Found candidate job testster (Priority #10)." 2016-09-13T20:42:55.893 - DEBG - Scheduler: Checking INDI State... 2016-09-13T20:42:55.893 - DEBG - Scheduler: Checking INDI Properties... 2016-09-13T20:42:56.324 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:42:56.330 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:42:56.893 - DEBG - Scheduler: Checking INDI State... 2016-09-13T20:42:57.893 - DEBG - Scheduler: Get next action... 2016-09-13T20:42:57.894 - DEBG - Scheduler: "Slewing to testster ..." 2016-09-13T20:42:57.896 - DEBG - ISD:Telescope: Sending coords RA 22.013 DEC 27.0841 2016-09-13T20:42:57.965 - DEBG - EQMod Mount : "Starting Goto RA=22.013 DE=27.0841 (current RA=22.0366 DE=32.2489) " 2016-09-13T20:42:57.968 - DEBG - EQMod Mount : "GOTO ALign Nearest: delta RA = 0.023200, delta DEC = 5.164800 " 2016-09-13T20:42:57.970 - DEBG - EQMod Mount : "Aligned Eqmod Goto RA=22.0362 DE=32.2489 (target RA=22.013 DE=27.0841) " 2016-09-13T20:42:57.973 - DEBG - EQMod Mount : "Setting Eqmod Goto RA=22.0362 DE=32.2489 (target RA=22.013 DE=27.0841) " 2016-09-13T20:42:57.990 - DEBG - EQMod Mount : "Slewing mount: RA increment = 146, DE increment = 0 " 2016-09-13T20:42:58.084 - DEBG - EQMod Mount : "Slewing to RA: 22:00:47 - DEC: 27:05:03 " 2016-09-13T20:42:58.894 - DEBG - Scheduler: Slewing Stage... Slew Status is Busy 2016-09-13T20:42:58.983 - DEBG - EQMod Mount : "Iterative Goto (1): RA diff = 0.96 arcsecs DE diff = 0.12 arcsecs " 2016-09-13T20:42:59.048 - DEBG - EQMod Mount : "Telescope slew is complete. Tracking TRACK_SIDEREAL... " 2016-09-13T20:42:59.894 - DEBG - Scheduler: Slewing Stage... Slew Status is Busy 2016-09-13T20:43:00.894 - DEBG - Scheduler: Slewing Stage... Slew Status is Ok 2016-09-13T20:43:00.894 - DEBG - Scheduler: "testster slew is complete." 2016-09-13T20:43:00.897 - DEBG - Scheduler: Get next action... 2016-09-13T20:43:00.899 - DEBG - Guide: "Capturing image..." 2016-09-13T20:43:00.903 - DEBG - Scheduler: "Calibrating testster ..." 2016-09-13T20:43:00.913 - DEBG - SBIG CCD : "Taking 1s exposure on guide head... " 2016-09-13T20:43:00.918 - DEBG - SBIG CCD : "Exposure params for CCD (1) openShutter(1), exposureTime (500), binnig (0), left (0), top (0), w(657), h(495) " 2016-09-13T20:43:00.926 - DEBG - SBIG CCD : "Light Frame exposure in progress... " 2016-09-13T20:43:01.326 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:43:01.332 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:43:01.408 - DEBG - SBIG CCD : "Guide head exposure in progress with 4 seconds left... " 2016-09-13T20:43:01.893 - DEBG - Scheduler: Calibration & Guide stage... 2016-09-13T20:43:02.408 - DEBG - SBIG CCD : "Guide head exposure in progress with 3 seconds left... " 2016-09-13T20:43:02.893 - DEBG - Scheduler: Calibration & Guide stage... 2016-09-13T20:43:03.412 - DEBG - SBIG CCD : "Guide head exposure in progress with 2 seconds left... " 2016-09-13T20:43:03.893 - DEBG - Scheduler: Calibration & Guide stage... 2016-09-13T20:43:04.414 - DEBG - SBIG CCD : "Guide head exposure in progress with 1 seconds left... " 2016-09-13T20:43:04.894 - DEBG - Scheduler: Calibration & Guide stage... 2016-09-13T20:43:05.417 - DEBG - SBIG CCD : "Guide head exposure in progress with 0 seconds left... " 2016-09-13T20:43:05.894 - DEBG - Scheduler: Calibration & Guide stage... 2016-09-13T20:43:06.328 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:43:06.334 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:43:06.680 - DEBG - SBIG CCD : "Guide head exposure done, downloading image... " 2016-09-13T20:43:06.685 - DEBG - SBIG CCD : "Guide head readout in progress... " 2016-09-13T20:43:06.893 - DEBG - Scheduler: Calibration & Guide stage... 2016-09-13T20:43:07.614 - DEBG - SBIG CCD : [b]"Guide head readout complete "[/b] 2016-09-13T20:43:07.736 - DEBG - fits MIN: 8368 - fits MAX: 52075 - pixel range: 43707 - bin width 76.8137 bin count 570 2016-09-13T20:43:07.763 - DEBG - FITHistogram: JMIndex 0.996017 2016-09-13T20:43:07.808 - DEBG - Guide: recieved guide frame. 2016-09-13T20:43:07.808 - DEBG - Guide: "Image captured..." 2016-09-13T20:43:07.811 - DEBG - SNR: 6.99896 2016-09-13T20:43:07.811 - DEBG - The threshold level is 12624.2 (actual 4256.22 ) minimum edge width 5 minimum edge limit 3 2016-09-13T20:43:07.816 - DEBG - Total number of edges found is: 0 2016-09-13T20:43:07.816 - DEBG - SNR: 6.99896 2016-09-13T20:43:07.816 - DEBG - The threshold level is 11881.5 (actual 3513.53 ) minimum edge width 4 minimum edge limit 3 2016-09-13T20:43:07.821 - DEBG - Total number of edges found is: 0 2016-09-13T20:43:07.821 - DEBG - SNR: 6.99896 2016-09-13T20:43:07.821 - DEBG - The threshold level is 11287.4 (actual 2919.37 ) minimum edge width 3 minimum edge limit 3 2016-09-13T20:43:07.822 - DEBG - Edge center is 13340 Edge is 3129 and ratio is 4.26334 located at X: 234.037 Y: 92.5 2016-09-13T20:43:07.822 - DEBG - Edge center is 32840 Edge is 3272 and ratio is 10.0367 located at X: 121.259 Y: 94.5 2016-09-13T20:43:07.822 - DEBG - Edge center is 21158 Edge is 4454 and ratio is 4.75034 located at X: 331.455 Y: 133.5 2016-09-13T20:43:07.823 - DEBG - Edge center is 17326 Edge is 1532 and ratio is 11.3094 located at X: 588.901 Y: 153.5 2016-09-13T20:43:07.823 - DEBG - Edge center is 6459 Edge is 2936 and ratio is 2.19993 located at X: 548.521 Y: 179.5 2016-09-13T20:43:07.824 - DEBG - Edge center is 5452 Edge is 3121 and ratio is 1.74688 located at X: 492.531 Y: 245.5 2016-09-13T20:43:07.824 - DEBG - Edge center is 14689 Edge is 2406 and ratio is 6.10515 located at X: 303.93 Y: 251.5 2016-09-13T20:43:07.826 - DEBG - Edge center is 4380 Edge is 1132 and ratio is 3.8 4) When I click simply in the "focus" tab on "capture", to capture an image, he doesn't show the fits viewer either (with main chip) d (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:49:51.612 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:49:56.608 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:49:56.615 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:50:01.610 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:50:01.617 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:50:03.952 - DEBG - Focus: "Capturing image..." 2016-09-13T20:50:03.961 - DEBG - SBIG CCD : "Taking 1s exposure on main camera... " 2016-09-13T20:50:03.967 - DEBG - SBIG CCD : "Exposure params for CCD (0) openShutter(1), exposureTime (100), binnig (0), left (0), top (0), w(1530), h(1020) " 2016-09-13T20:50:04.672 - DEBG - SBIG CCD : "Light Frame exposure in progress... " 2016-09-13T20:50:04.870 - DEBG - SBIG CCD : "Primary camera exposure in progress with 0 seconds left... " 2016-09-13T20:50:06.146 - DEBG - SBIG CCD : "Primay camera exposure done, downloading image... " 2016-09-13T20:50:06.153 - DEBG - SBIG CCD : "Primary camera readout in progress... " 2016-09-13T20:50:10.550 - DEBG - SBIG CCD : [b]"Primary camera readout complete "[/b] 2016-09-13T20:50:10.750 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:50:10.756 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:50:15.754 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:50:15.762 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:50:20.757 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:50:20.763 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 5) When I go to exposure, make a sequence, and click on "preview", then he stucks on "downloading". (for this I attached an attachment). d (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:49:51.612 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:49:56.608 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:49:56.615 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:50:01.610 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:50:01.617 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:50:03.952 - DEBG - Focus: "Capturing image..." 2016-09-13T20:50:03.961 - DEBG - SBIG CCD : "Taking 1s exposure on main camera... " 2016-09-13T20:50:03.967 - DEBG - SBIG CCD : "Exposure params for CCD (0) openShutter(1), exposureTime (100), binnig (0), left (0), top (0), w(1530), h(1020) " 2016-09-13T20:50:04.672 - DEBG - SBIG CCD : "Light Frame exposure in progress... " 2016-09-13T20:50:04.870 - DEBG - SBIG CCD : "Primary camera exposure in progress with 0 seconds left... " 2016-09-13T20:50:06.146 - DEBG - SBIG CCD : "Primay camera exposure done, downloading image... " 2016-09-13T20:50:06.153 - DEBG - SBIG CCD : "Primary camera readout in progress... " 2016-09-13T20:50:10.550 - DEBG - SBIG CCD : [b]"Primary camera readout complete "[/b] 2016-09-13T20:50:10.750 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:50:10.756 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:50:15.754 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:50:15.762 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 " 2016-09-13T20:50:20.757 - DEBG - SBIG CCD : "QueryTemperatureStatus: Regulation Enabled (False) ccdTemp (30.6118) setpointTemp (20.5791) power (0) " 2016-09-13T20:50:20.763 - DEBG - SBIG CCD : "ccdTemp: 30.6118 setpointTemp: 20.5791 TEMP_DIFF 0.5 "