Hello,
I decided today to substitute my QHY183M to my Nikon 5300 with which I had lot of troubles yesterday (I will explain it in another post).
I have Mint 19.3 installed on my notepad. I have used the QHY183M successfully on May.
But today she is no more detected.
I don't know if it comes from the Cypress WestBridge driver of linux or from QHY sdk or anything else. If somebody have any idea.
I am a bit desperate with none of my imagers working good.
Here are the results of tries to detect the camera:
** lsusb ***
Bus 002 Device 003: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure Applications Processor with fingerprint swipe sensor
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0c45:649d Microdia
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 046d:c404 Logitech, Inc. TrackMan Wheel
Bus 003 Device 004: ID 413c:81a3 Dell Computer Corp. Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card Bus 003 Device 010: ID 1618:c183 Cypress WestBridge
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
QHY Test CCD using SingleFrameMode, Version: 1.00
QHYCCD|QHYCCD.CPP|InitQHYCCDResource()|START
QHYCCD|QHYCCD.CPP|InitQHYCCDResource|auto_detect_camera:false,call InitQHYCCDResourceInside
QHYCCD|QHYCCD.CPP|InitQHYCCDResourceInside|START
QHYCCD|QHYCCD.CPP|InitQHYCCDResourceInside|PCIE clear info structure 0
QHYCCD|QHYCCD.CPP|InitQHYCCDResourceInside|PCIE clear info structure 1
QHYCCD|QHYCCD.CPP|InitQHYCCDResourceInside|PCIE clear info structure 2
QHYCCD|QHYCCD.CPP|InitQHYCCDResourceInside|PCIE clear info structure 3
QHYCCD|QHYCCD.CPP|InitQHYCCDResourceInside|PCIE clear info structure 4
QHYCCD|QHYCCD.CPP|InitQHYCCDResourceInside|PCIE call fpga_list
QHYCCD|QHYCCD.CPP|InitQHYCCDResourceInside|numdev set to 0
QHYCCD|QHYCCD.CPP|InitQHYCCDResourceInside|END
QHYCCD|QHYCCD.CPP|InitQHYCCDResource()|END
SDK resources initialized.
QHYCCD|QHYCCD.CPP|ScanQHYCCD|START
QHYCCD|QHYCCD.CPP|ScanQHYCCD|Call ScanQHYCCDInside
QHYCCD|QHYCCD.CPP|ScanQHYCCDInside|START|numdev set to 0
QHYCCD|QHYCCD.CPP|ScanQHYCCD|scan pcie camera numdev = 0
QHYCCD|QHYCCD.CPP|ScanQHYCCDInside|ScanQHYCCD numdev=0
QHYCCD|QHYCCD.CPP|ScanQHYCCDInside|END|Return nid=0
QHYCCD|QHYCCD.CPP|ScanQHYCCD|END|return numdev 0
No QHYCCD camera found, please check USB or power.