I have the same issue. I tried to change usb ports from 3.0 to 2.0, usb cables and raspberry power supplies, but whei i stop the first Loop in Guide module, the next one take only the first frame and than hangs
I noticed that if i run the What's Up Tonight tool it load very very slow, and when it appears if i try to scroll down the list of object, it dows not respond quickly.
Actually I use Raspbian OS at 64bit with latest Kstars 3.5.8.
This is the new log file after the new driver has been compiled
Yes It is selected for first in the capture panel and the guide head in the guide panel
knro wrote: When you capture a CCD sequence, is the selected camera the primary camera or the guide head? Make sure it's the former.
Thanks Jasem, I am now at work, in about 6 hours I will be at home and I will be able to attach the telescope to the Rasberry. As soon as I have everything ready I will send you id and password for remote access.
Best regards Giosi
Hi Jasem, as for the wheel in question, I can say that Windows recognizes it as ardware after installing the FLI driver but it works and is recognized as a wheel by itself after installing this ascom.
Hi everyone, I want yours helpI own The SXV Autoguider Head that I use with the SVX-16H and can be used with any video camera from the SXV range. It has a 1/3 CCD format and is controlled by the main camera. The cameras are both recognized as a single 2-sensor CCD, they work well under INDI if used individually, they do not work when driving and simultaneously use the SVX-16H. It happens that the shooting of the SVX-16H stops every time the guide frame arrives
Hello to all. I hope someone can help me.
SXV-H16 CCD problem with Autoguide Head.
It seems that everything works, the CCD is seen with 2 sensors, both work separately but when I try to acquire a fit and the guide chamber is in operation every second the countdown starts again. I attach complete log