Hi Folks,

The other night I tested the SV305PRO with a USB3 powered HUB to see if it had any issues and check if not stop the camera. And I was unlucky. I was doing the same with the HUB as without it.
I was trying to track with ekos and yes it was do the first image to take references, it was moving the mount to do the calibration and then there was no way it could do the next image.
I tried to plug/unplug it, turn it on, reset the ekos and nothing at all, I wasn’t lucky either. Only when I stopped (switch off) the whole system and tried again, only then it did work once and I was left waiting to do the second image again.
I tried it with and without the USB3 powered HUB, and even with just the SV305PRO connected to the USB3 and everything else (OnStep and DSRL) to the USB2 ports. And the result was the same. I remember you I have the astroberry as an INDI-server.
Any suggestions to be able to do the guidance? Basically is the use I would want to do by camera (and some times to do some planet or Moon)
Thank you all,
Pep

Read More...