Dear Tom,

About Ekos guiding: I mean the internal of ekos.
With the external guide that uses PHD2, it works, although in the evening it had an error (after about 50 minutes) when disconnecting the camera and I could no reconecting it to activate it (it was too late and I did not try reset everything. I guess it would have worked ).
Although if it were possible to use the internal guidance of the Ekos I would prefer it .

The mount (OnStep), which is not connected, was in the afternoon when I tried to configure the settings you commented on, and the OnStep uploaded. But it works and connects well after.

I also need to calibrate mechanically the DEC axis because I have had sudden changes on DEC graphyc. I guess that's why the guide stopped every 4 minutes (approximately). In fact, the graphics were creepy.

The settings of the changes you told me, I changed it correctly, right? I don't have to change any more, do I?
Aside from mechanically adjusting the mount, is there anything else I need to do or setup?

I use the sv305Pro camera (by USB3 powered HUB).
I will use the camera as a guide, basically. But when possible, I would also like to do in planetary and moon, but I need to be able to lower the times to 1ms, now it don’t let goes down from 10ms.

Thanks a lot,

Pep

Read More...