Petar Milevski replied to the topic 'Guiding problem using EKOS' in the forum. 4 years ago

Hi all just to add to the guiding issue, i have not had much luck with the internal guider on my RPi4 over the last few nights ever since the last update (3.4.2). See attached logs.

When i use phd2, i have no issues. See attached log from phd2.

Initially i though the problem was with my mount, so i adjusted my mount to eliminate backlash. Polar alignment was within within 12" of the south celestial pole. The weather was fine (no wind), no cable snags, everything was balanced and mount clutches tight.

But the internal guider just did not want to cooperate. I also tested with my Asus tinker board which was last updated on 2/1/2020 and the internal guider works perfectly.

So something has changed in the internal guider.

regards


dfdfdfdfdfdfdfdfd

Read More...