I've change OS to the last Linux Mint and updated Kstars. Now it runs smooth.
Regards
Miguel
Read More...
Thanks for the advice, I'll check it and I'll update library..
That orangepi board must be in lack of updates. In the other hand, raspberry pi2, orangepi Lite and a second orange pi pcplus allow remote connection of a eqmod telescope.
Regards
Miguel
Read More...
Hi,
I have tested in another pi orange board, in this case an orangepi lite, with armbian, and it's working in remote mode. I'll test the rpi.
Regards.
Read More...
Sorry, now it is attached.
I am using version included in DistroAstro, based on Linux mint.
Read More...
Dear all,
I'm a new user. I've testing INDI and Ekos with Celestron CGEM and LCM mounts, with qhy and sx cameras, all succesfully, with a host running indiserver.
I'm trying to connect a Synscan mount by eqmod driver. Local connection was fine. I only had to solve an user permissions issue with adduser command.
But for now I cannot connect mount in remote mode to host (orangepi pcplus running armbian).
Log is attached.
Best regards
Miguel
Read More...
Dear all,
I'm a new user and I have been trying indiserver with a Celestron LCM mount for test, and some qhy and sx cameras, with fine results.
Now I am testing conection of Synscan mount through eqmod with a pc direct usb cable. In local connection in my computer it works fine (there was a problem with user permissions but it was fixed with adduser command).
Now I've connected USB cable to an orangepi pc-plus (wich worked fine with cameras and Celestron CGEM and LCM mounts), I start indiserver with indi_eqmod_telescope, start EKOS in my client laptop, start INDI, and when I'm connecting, it fails and shows the error message:
2017-07-24T12:24:31: Communication with /dev/ttyUSB0 @ 9600 failed. Starting Auto Search...
2017-07-24T12:24:31: Error: -> tty read failed, check connection: Timeout error
Orangepi pc-plus runs armbian, and my laptop uses linux mint, with KstarsVersion 2.2.0
Using KDE Development Platform 4.13.3. I've made adduser to try in case an user permission were the problem, but not worked. I tryied to solve it changing to another port, from USB0 to USB1, but it didn't work.
I attach log.
Best regards
Miguel
Read More...