Hi, having issues with 1.4.5 so just installed 1.4.6. Indoor test only so not sure if I will have the same problem. I goto a target and use ASTAP to plate solve and align, (very impressed with ASTAP, solves in seconds) I then start a sequence , kstars will crash. It is very consistent. If ASTAP fails in its plate solve for any reason and I start the sequence, it will run through, albeit my target is not centered!!! Hope to test this again when the clouds go away, If I don't use ASTAP to center my target, the sequence will run through without crashing.

Equipment is: ioptron ieq45 pro, sky safari, qhy 168C, pole master and qhy5L-IIc

For 1.4.6

• Wifi Hotspot comes up automatically but it takes 1Min 57Sec for the hotspot to show up from power on. Must have rebooted over 50 times and every time it is exactly the same time to the second. Bootup time only is 30 secs
• If I leave it on Auto, the Wifi always uses the 2.4Ghz band so I manually set to to the 5Ghz band to get the faster speed.
• I initially had the same issues with the WiFi dropping out but that disappeared after I did a reset of the network configuration with the manual configuration to lock it on the 5GHz band.
• VNC over 4K is very laggy but at 1920x1080 is it very fast.

• There seems to an issue with my mount and sky safari - If I just plug in my 3 cameras, all the cameras work.
• If I then add my mount, I need to plug everything in a certain order, otherwise the Polemaster will crash kstars when taking a drak frame or the 5L occasionally does not show up in the indi panel, or all three cameras are unable to take an image and no messages in the indi panel. It is like ekos has lost communications with the cameras. The order is the three cameras first and then my mount before starting the indi server. Mount has to be on the first USB port but the last device to be plugged in
• If I then add in Sky Safari as an aux device, I see it connecting to the server but when I press connect in Sky Safari on my ipad, I see a message in the indi panel saying the client cannot connect so my ipad is communicating with the Pi but cannot connect to kstars. This occurs in both the Pi3 and Pi4. Works on 1.4.4
• When I add in Sky Safari and take a dark frame with the Polemaster, kstars crashes, doesn't occur when it is a light frame!!!! Not too much of an issue as I probably would never take a dark frame with my polemaster.