Thanks Japaana,

I will try that before I only was trying to connect with the allsky.

:)

Read More...

Hi Japaana,

I just got the new sd card yesterday and installed everything again. Everything from the hardware end seems to be working. It is taking images and such. The one problem I am having now is setting it up to my website and getting it to connect to FTP.

I enabled "true" to everything and all the stuff that should make it work. I also downloaded the website package to my site. Also to note, I am not using the GUI interface since I had trouble before with it. As far as putting files on my site. I created a new folder under Public HTML and called it "allsky" and put Thomas's files there. I did not do anything on the website end to FTP. Also I just installed a fresh Wordpress with SSL.

So below is what I am seeing in the terminal. The only thing I edited was my login and username below.

Thanks again for your help :)


# FTP/SFTP settings
PROTOCOL='ftp'
USER='myusername'
PASSWORD='mypassword!'
HOST='astrometeor.com'
IMGDIR='/allsky/'
MP4DIR='/allsky/videos/'
KEOGRAM_DIR='/allsky/keograms/'
STARTRAILS_DIR='/allsky/startrails/'

llsky.service - All Sky Camera
Loaded: loaded (/lib/systemd/system/allsky.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2020-06-14 01:31:44 EDT; 13h ago
Main PID: 742 (allsky.sh)
Tasks: 6 (limit: 4915)
Memory: 290.1M
CGroup: /system.slice/allsky.service
├─742 /bin/bash /home/pi/allsky/allsky.sh
└─879 ./capture -angle -6 -autoexposure 1 -autogain 0 -bin 1 -brightness 50 -coolerEnabled 0 -darkframe 0 -daytimeDelay 5000 -delay 10 -exposure 10000 -filename image.jpg -flip 0 -fontcolor 255 255 255 -fontline 1 -fontname 0 -

Jun 14 15:11:59 raspberrypi allsky.sh[742]: cd: Fatal error: Certificate verification: certificate common name doesn't match requested host name ‘astrometeor.com’ (C7:9A:17:85:5D:C8:AD:73:1C:7B:0D:AE:8D:54:E2:C0:A8:25:57:BC)
Jun 14 15:11:59 raspberrypi allsky.sh[742]: put: image-resize.jpg: Fatal error: Certificate verification: certificate common name doesn't match requested host name ‘astrometeor.com’ (C7:9A:17:85:5D:C8:AD:73:1C:7B:0D:AE:8D:54:E2:C0:A8:25:5
Jun 14 15:12:18 raspberrypi allsky.sh[742]: cd: Fatal error: Certificate verification: certificate common name doesn't match requested host name ‘astrometeor.com’ (C7:9A:17:85:5D:C8:AD:73:1C:7B:0D:AE:8D:54:E2:C0:A8:25:57:BC)
Jun 14 15:12:19 raspberrypi allsky.sh[742]: put: image-resize.jpg: Fatal error: Certificate verification: certificate common name doesn't match requested host name ‘astrometeor.com’ (C7:9A:17:85:5D:C8:AD:73:1C:7B:0D:AE:8D:54:E2:C0:A8:25:5
Jun 14 15:12:40 raspberrypi allsky.sh[742]: cd: Fatal error: Certificate verification: certificate common name doesn't match requested host name ‘astrometeor.com’ (C7:9A:17:85:5D:C8:AD:73:1C:7B:0D:AE:8D:54:E2:C0:A8:25:57:BC)
Jun 14 15:12:41 raspberrypi allsky.sh[742]: put: image-resize.jpg: Fatal error: Certificate verification: certificate common name doesn't match requested host name ‘astrometeor.com’ (C7:9A:17:85:5D:C8:AD:73:1C:7B:0D:AE:8D:54:E2:C0:A8:25:5
Jun 14 15:12:58 raspberrypi allsky.sh[742]: cd: Fatal error: Certificate verification: certificate common name doesn't match requested host name ‘astrometeor.com’ (C7:9A:17:85:5D:C8:AD:73:1C:7B:0D:AE:8D:54:E2:C0:A8:25:57:BC)
Jun 14 15:12:59 raspberrypi allsky.sh[742]: put: image-resize.jpg: Fatal error: Certificate verification: certificate common name doesn't match requested host name ‘astrometeor.com’ (C7:9A:17:85:5D:C8:AD:73:1C:7B:0D:AE:8D:54:E2:C0:A8:25:5
Jun 14 15:13:18 raspberrypi allsky.sh[742]: cd: Fatal error: Certificate verification: certificate common name doesn't match requested host name ‘astrometeor.com’ (C7:9A:17:85:5D:C8:AD:73:1C:7B:0D:AE:8D:54:E2:C0:A8:25:57:BC)
Jun 14 15:13:19 raspberrypi allsky.sh[742]: put: image-resize.jpg: Fatal error: Certificate verification: certificate common name doesn't match requested host name ‘astrometeor.com’ (C7:9A:17:85:5D:C8:AD:73:1C:7B:0D:AE:8D:54:E2:C0:A8:25:5
~

Read More...

Thanks for the clarification on that. I will keep the install directory /home/pi/allsky. Unfortunately when I was installing the case fan I just got and trying to put the board back in the bottom of the case I left the sd micro card in and accidentally snapped it when I pushed down so I got to wait till tomorrow until the new one arrives. Thank God there not too expensive.

Thanks again :)

Read More...

Thx Jpaana, I think I finally got it working. Was able to view camera in GUI mode through IP address. Only issue Im having when I tried to use t terminal and go to the config.sh to change settings,, no settings would show. I was trying set the upload settings to true for everything. I ended up just doing a reinstall so there set now. But I did read that the directory would change when you put it in GUI. But I have no trouble with the settings in GUI mode

Also the next thing I am doing is putting a fan on my factory pi case, it was running at 85c lol. Then read an article on how the fan helps a lot.

Now the next thing I want to do is to hook it up to my website. So trying to learn that. :) I'm away for biz till Wednesday andby then hopefully all my parts arrived :)

Thanks again :)

Read More...

Thanks again,

Right now I am at teh part that says "Use of allsky on non-ARM platforms is unsupported (there isn't yet an easy, portable installer) but should be possible. Have a look at install.sh to see what needs to be done. Additionally, you'll need to download the SDK.

Now, run the install script:" Do I need the SDK from ZWO? This was where I ran into a problem when trying to connect before or does teh script by Thomas do this for you?

:)

Read More...

Oh Cool, I checked it out and that is exactly what I want to do. I see the cameras tested, now I plan on running a new/used ZWO either the 120mm or 224mc, but also may pop in my 385mc at least to test it out and get it working. Also I just did a clean install of Raspian from there download page. Got to check if it is buster. I am also using a 64gb card

With that said what would be the best camera for this application. My budget is around $250 . As I will be using my other ZWO cams for imaging while that is running.

Thanks Again :)

Read More...

Thanks Japaana,

With that do I still install Astro PI3 scripts?

Read More...

Thank You Chirs :)

I will try that with a fresh install of Raspian.

Read More...