I updated the signature to show my gear i also updated kstar to the latest version right now, tonight i will try again and hope it doesn't happen
Read More...
In fact it seemed like a nonsense thing to me, I noticed that saving does it 1 time out of 3 that the exposure is blocked and it also happens that the exposure timer starts to display numbers at random only to stabilize after a full exposure.
Now I have no logs available, but I will enable them for the next session and post them here, thanks.
Read More...
Hi everyone, my mount does not have a perfect guide, so I set the limits for the deviation to abort the shot, the problem is that when for example I set an exposure to 300 seconds, it stops at 30 seconds, the image it is saved anyway.
So I have to go and erase them by hand every time.Is there a way to not save the aborted exposures?
Read More...
I am attaching the complete log file, I forgot to mention that the operating system is 32-bit, I don't know if this can affect its operation, thanks 
Read More...
Hi everyone, I'm trying to connect my canon 650d to ekos, using the canon dslr indi drivers (i try gphoto driver too), but the only thing I get is that the camera is recognized but the connection remains with the yellow icon. if I try to specify a port in the right box and apply, nothing is entered in the left box.
If I try to take a photo with gphoto2 from command line it does it without problems.
I tried changing cables, changing ports, updating everything, removing auto-mount from the OS, but nothing.
My OS version is Ubuntu 18.04.5 LTS installed in an eeepc 1000h
In the ekos log file the only lines that refer to the canon are these:
[2020-10-22T10:45:29.974 CEST DEBG ][ org.kde.kstars.indi] - Received new device Canon DSLR EOS 650D
[2020-10-22T10:45:30.010 CEST DEBG ][ org.kde.kstars.indi] - INDIListener: New device Canon DSLR EOS 650D
[2020-10-22T10:45:30.010 CEST INFO ][ org.kde.kstars.ekos] - Ekos received a new device: Canon DSLR EOS 650D
[2020-10-22T10:45:30.018 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < CONNECTION >
[2020-10-22T10:45:30.052 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < DRIVER_INFO >
[2020-10-22T10:45:30.065 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < POLLING_PERIOD >
[2020-10-22T10:45:30.074 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < DEBUG >
[2020-10-22T10:45:30.078 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < SIMULATION >
[2020-10-22T10:45:30.081 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < CONFIG_PROCESS >
[2020-10-22T10:45:30.084 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < ACTIVE_DEVICES >
[2020-10-22T10:45:30.097 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < DEVICE_PORT >Anyone have any suggestions? Thank you
Read More...
Hi everyone, I'm trying to connect my canon 650d to ekos, using the canon dslr indi drivers (i try gphoto driver too), but the only thing I get is that the camera is recognized but the connection remains with the yellow icon. if I try to specify a port in the right box and apply, nothing is entered in the left box.
If I try to take a photo with gphoto2 from command line it does it without problems.
I tried changing cables, changing ports, updating everything, removing auto-mount from the OS, but nothing.
My OS version is Ubuntu 18.04.5 LTS installed in an eeepc 1000h
In the ekos log file the only lines that refer to the canon are these:
[2020-10-22T10:45:29.974 CEST DEBG ][ org.kde.kstars.indi] - Received new device Canon DSLR EOS 650D
[2020-10-22T10:45:30.010 CEST DEBG ][ org.kde.kstars.indi] - INDIListener: New device Canon DSLR EOS 650D
[2020-10-22T10:45:30.010 CEST INFO ][ org.kde.kstars.ekos] - Ekos received a new device: Canon DSLR EOS 650D
[2020-10-22T10:45:30.018 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < CONNECTION >
[2020-10-22T10:45:30.052 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < DRIVER_INFO >
[2020-10-22T10:45:30.065 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < POLLING_PERIOD >
[2020-10-22T10:45:30.074 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < DEBUG >
[2020-10-22T10:45:30.078 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < SIMULATION >
[2020-10-22T10:45:30.081 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < CONFIG_PROCESS >
[2020-10-22T10:45:30.084 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < ACTIVE_DEVICES >
[2020-10-22T10:45:30.097 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < DEVICE_PORT >Anyone have any suggestions? Thank you
Read More...
Hi everyone, I'm trying to connect my canon 650d to ekos, using the canon dslr indi drivers (i try gphoto driver too), but the only thing I get is that the camera is recognized but the connection remains with the yellow icon. if I try to specify a port in the right box and apply, nothing is entered in the left box.
If I try to take a photo with gphoto2 from command line it does it without problems.
I tried changing cables, changing ports, updating everything, removing auto-mount from the OS, but nothing.
My OS version is Ubuntu 18.04.5 LTS installed in an eeepc 1000h
In the ekos log file the only lines that refer to the canon are these:
<code>[2020-10-22T10:45:29.974 CEST DEBG ][ org.kde.kstars.indi] - Received new device Canon DSLR EOS 650D
[2020-10-22T10:45:30.010 CEST DEBG ][ org.kde.kstars.indi] - INDIListener: New device Canon DSLR EOS 650D
[2020-10-22T10:45:30.010 CEST INFO ][ org.kde.kstars.ekos] - Ekos received a new device: Canon DSLR EOS 650D
[2020-10-22T10:45:30.018 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < CONNECTION >
[2020-10-22T10:45:30.052 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < DRIVER_INFO >
[2020-10-22T10:45:30.065 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < POLLING_PERIOD >
[2020-10-22T10:45:30.074 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < DEBUG >
[2020-10-22T10:45:30.078 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < SIMULATION >
[2020-10-22T10:45:30.081 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < CONFIG_PROCESS >
[2020-10-22T10:45:30.084 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < ACTIVE_DEVICES >
[2020-10-22T10:45:30.097 CEST DEBG ][ org.kde.kstars.indi] - < Canon DSLR EOS 650D >: < DEVICE_PORT ></code>
Anyone have any suggestions? Thank you
Read More...