Hi Ben / Bruce and all who can help.
Firstly, sorry if this as been posted twice...
I came across this thread which seems to identify the problem I’m having. I’ve moving from a W7 PC to a RaspPi4B running UBUNTU 20.04 LTS 64-bit and KSTARS/EKOS.
I can find the DSI Pro III colour using sudo usb-devices (lsusb doesn’t give me all USB devices):
T: Bus=01 Lev=04 Prnt=08 Port=01 Cnt=01 Dev#= 14 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=156c ProdID=0101 Rev=00.00
S: Manufacturer=Cypress
S: Product=EZ-USB FX2
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I’ve run all the commands upto link but when I start EKOS I only get to:
ubuntu@ubuntu:~$ indiserver -v indi_dsi_ccd
2020-12-20T08:02:03: startup: indiserver -v indi_dsi_ccd
2020-12-20T08:02:03: Driver indi_dsi_ccd: pid=5037 rfd=3 wfd=6 efd=7
2020-12-20T08:02:03: listening to port 7624 on fd 4
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Telescope Simulator.EQUATORIAL_EOD_COORD
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Telescope Simulator.TELESCOPE_INFO
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Telescope Simulator.GEOGRAPHIC_COORD
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Telescope Simulator.TELESCOPE_PIER_SIDE
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Rotator Simulator.ABS_ROTATOR_ANGLE
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Focuser Simulator.ABS_FOCUS_POSITION
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Focuser Simulator.FOCUS_TEMPERATURE
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on CCD Simulator.FILTER_SLOT
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on CCD Simulator.FILTER_NAME
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on SQM.SKY_QUALITY
2020-12-20T08:02:07: Client 0: new arrival from 127.0.0.1:50762 - welcome!
2020-12-20T08:02:51: Client 0: read EOF
2020-12-20T08:02:51: Client 0: shut down complete - bye!
@Ben, you said to leave everything as default, but if I put nothing in the CCD section it won’t start and I get a warning saying I need at least a CCD or Guider. So I selected MEADE DSI in CCD but the output is as with Bruce:
2020-12-20T09:01:45: [INFO] Unable to find DSI. Has the firmware been loaded?
What's worrying is that you say the correction has been applied in the driver, but that was 3 months ago and I'm sure I've updated...
I'd be really grateful for any help / advice ?
Thanks!
Read More...
Hi Ben / Bruce and all who can help.
I came across this thread which seems to identify the problem I’m having. I’ve moving from a W7 PC to a RaspPi4B running UBUNTU 20.04 LTS 64-bit and KSTARS/EKOS.
I can find the DSI Pro III colour using sudo usb-devices (lsusb doesn’t give me all USB devices):
T: Bus=01 Lev=04 Prnt=08 Port=01 Cnt=01 Dev#= 14 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=156c ProdID=0101 Rev=00.00
S: Manufacturer=Cypress
S: Product=EZ-USB FX2
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I’ve run all the commands upto link but when I start EKOS I only get to:
ubuntu@ubuntu:~$ indiserver -v indi_dsi_ccd
2020-12-20T08:02:03: startup: indiserver -v indi_dsi_ccd
2020-12-20T08:02:03: Driver indi_dsi_ccd: pid=5037 rfd=3 wfd=6 efd=7
2020-12-20T08:02:03: listening to port 7624 on fd 4
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Telescope Simulator.EQUATORIAL_EOD_COORD
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Telescope Simulator.TELESCOPE_INFO
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Telescope Simulator.GEOGRAPHIC_COORD
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Telescope Simulator.TELESCOPE_PIER_SIDE
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Rotator Simulator.ABS_ROTATOR_ANGLE
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Focuser Simulator.ABS_FOCUS_POSITION
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on Focuser Simulator.FOCUS_TEMPERATURE
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on CCD Simulator.FILTER_SLOT
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on CCD Simulator.FILTER_NAME
2020-12-20T08:02:03: Driver indi_dsi_ccd: snooping on SQM.SKY_QUALITY
2020-12-20T08:02:07: Client 0: new arrival from 127.0.0.1:50762 - welcome!
2020-12-20T08:02:51: Client 0: read EOF
2020-12-20T08:02:51: Client 0: shut down complete - bye!
@Ben, you said to leave everything as default, but if I put nothing in the CCD section it won’t start and I get a warning saying I need at least a CCD or Guider. So I selected MEADE DSI in CCD but the output is as with Bruce:
2020-12-20T09:01:45: [INFO] Unable to find DSI. Has the firmware been loaded?
What's worrying is that you say the correction has been applied in the driver, but that was 3 months ago and I'm sure I've updated...
I'd be really grateful for any help / advice ?
Thanks!
Read More...
© 2003-2022 by INDI Library. All rights reserved.