Always great to see some positive comments/reviews about Stellarmate - Cuiv is a pretty prominent astrophotographer/YouTube personality with a sizable following!  I've not finished the video yet (~50min) but he has given a pretty thorough "howto" so far which is great!

you can watch the video here:
www.youtube.com/watch?v=0JdtL950RjQ

 

Read More...

Hank replied to the topic 'Discord server?' in the forum. 4 months ago

+1 for slack channel!

Read More...

I don't want to say I've "solved" this just yet. I've been having a number of issues - one of which I think may be power related. I've seen low-power warnings (under-voltage) in the past but they were never directly tied to crashes like I mentioned above. My rpi4 was being powered by a PPBA, USB port 1 - which the Pegasus claims is specifically for powering devices like rpi4 (from the website). It's one of the reasons I purchased the PPBA so I could minimize the number of cables coming off the OTA.

So last imaging session I pulled out the power adapter that came with my rpi4 and ran that directly. I didn't see any under-voltage errors in my last session and I did not have the repeat of the crashes that started this thread. How are you powering your rpi Andrea?

I'm wondering if anyone else using the Pegasus PBA to power their rpi4 is having under-voltage issues. I've tried two different USBA to USBC cables with the same results.

Read More...

Hello all,
    I've been running SM for a while now with pretty good results/sessions (some issues with meridian flips but that may be user errors).  Last night after applying the latest apt update/upgrade patches my Ekos/Kstars environment crashes when capturing the 1st image.  I enabled debugging in the hopes to capture this bug for the devs but for whatever reason, the logs directories are empty (enabled through Ekos->logs->select verbose and selected all the Ekos options (excepts scheduler and obs) and selected Drivers for CCD, mount and focuser.  My .indi logs and .local/share/kstars/logs directory are empty.  I was able to grab the dmesg output (below).  Here's the sequence of events and the equipment involved:

Gear Config: rpi4 8gb with Argon One SSD, pegasus PBBA, external wifi, zwo 294mm pro, zwo 290mm (guide in OAG), zwo EAF and EFW, eq6-r pro mount.  rpi4 has argon taking one usb3 and the PBBA taking the other usb3.  Wifi antenna connected to usb2 port (strong 5g signal).  290mm and 294mm connected to ports 3&4 on PBBA, eaf and efw connected to hub on 294mm.  rpi4 power from port 1 on PBBA as recommended.  Mount connected to port 2 on PBBA.  OTA is a 130mm refractor / F7.  The mount is powered by the PBBA 12v as is the 294mm.

Session workflow:  I connect to SM via remote desktop so I can connect/disconnect as needed and not interrupt the session. Kstars starts automatically, I then start Ekos.  I use the mount control to search for my target (in this case ngc6992) and then goto.  I then use alignment to plate solve which succeeds after a minute.  I then start guiding with internal/multi-star and that works as well with reasonable RMS.  I then turn on cooling on the camera and load up the schedule with 15 x 500s subs in both Ha and OIII.  120 gain, 30 offset and I have the meridian flip set to 0.10 hours after meridian and OTA park at 04:00.  I start the sequence and the first capture counts all the way down and when the FITS viewer is about to pop up, everything crashes and Kstars restarts.  I repeated this at least 4 times (after a full rpi reboot) and had the same results.  I tried this using the "fits viewer" and "single preview tab" in the FITS configure section and also tried "limited resource mode".  I would also disconnect from my VNC session in case that bandwidth/processing was interfering.  I had 2 successful sessions in this same config last week (prior to update) without this issue. 

Here is what I captured from dmesg (scroll to the bottom):

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.52-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1440 SMP Tue Jul 27 09:55:21 BST 2021
[    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x000000000ec00000, size 512 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000002fefffff]
[    0.000000]   Normal   empty
[    0.000000]   HighMem  [mem 0x000000002ff00000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000002fefffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] On node 0 totalpages: 2014976
[    0.000000]   DMA zone: 1726 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 196352 pages, LIFO batch:63
[    0.000000]   HighMem zone: 1818624 pages, LIFO batch:63
[    0.000000] percpu: Embedded 20 pages/cpu s50764 r8192 d22964 u81920
[    0.000000] pcpu-alloc: s50764 r8192 d22964 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2013250
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1600x900M@60 smsc95xx.macaddr=DC:A6:32:EB:54:85 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  splash quiet plymouth.ignore-serial-consoles console=tty1 console=ttyS0,115200 root=PARTUUID=d9b3f436-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait logo.nologo usbcore.usbfs_memory_mb=1024
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000006400000-0x000000000a400000] (64MB)
[    0.000000] Memory: 7377852K/8059904K available (10240K kernel code, 1364K rwdata, 3188K rodata, 2048K init, 891K bss, 157764K reserved, 524288K cma-reserved, 7274496K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 34303 entries in 67 pages
[    0.000000] ftrace: allocated 67 pages with 3 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]     Rude variant of Tasks RCU enabled.
[    0.000000]     Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=0
[    0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000027] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000085] bcm2835: system timer (irq = 25)
[    0.000734] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000752] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000771] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000785] Switching to timer-based delay loop, resolution 18ns
[    0.001041] Console: colour dummy device 80x30
[    0.001110] printk: console [tty1] enabled
[    0.001166] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[    0.001199] pid_max: default: 32768 minimum: 301
[    0.001360] LSM: Security Framework initializing
[    0.001544] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001569] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.003003] cgroup: Disabling memory control group subsystem
[    0.003228] CPU: Testing write buffer coherency: ok
[    0.003683] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.004896] Setting up static identity map for 0x200000 - 0x20003c
[    0.005094] rcu: Hierarchical SRCU implementation.
[    0.006025] smp: Bringing up secondary CPUs ...
[    0.007206] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.008544] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.009817] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.009974] smp: Brought up 1 node, 4 CPUs
[    0.009995] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[    0.010010] CPU: All CPU(s) started in HYP mode.
[    0.010024] CPU: Virtualization extensions available.
[    0.010915] devtmpfs: initialized
[    0.025404] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[    0.025621] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.025650] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.038174] pinctrl core: initialized pinctrl subsystem
[    0.039220] NET: Registered protocol family 16
[    0.043054] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.043833] audit: initializing netlink subsys (disabled)
[    0.044095] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.044647] thermal_sys: Registered thermal governor 'step_wise'
[    0.045474] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.045492] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.045900] Serial: AMBA PL011 UART driver
[    0.081201] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.100853] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-07-21T16:22:36, variant start_x
[    0.110865] raspberrypi-firmware soc:firmware: Firmware hash is 6a796bb0062a6c75191c57cba1c13f9300076d02
[    0.151580] Kprobes globally optimized
[    0.156631] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.160807] vgaarb: loaded
[    0.161349] SCSI subsystem initialized
[    0.161562] usbcore: registered new interface driver usbfs
[    0.161620] usbcore: registered new interface driver hub
[    0.161706] usbcore: registered new device driver usb
[    0.162061] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.164055] clocksource: Switched to clocksource arch_sys_counter
[    1.122890] VFS: Disk quotas dquot_6.6.0
[    1.122982] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.123141] FS-Cache: Loaded
[    1.123348] CacheFiles: Loaded
[    1.124387] simple-framebuffer 3e565000.framebuffer: framebuffer at 0x3e565000, 0x591000 bytes, mapped to 0x(ptrval)
[    1.124408] simple-framebuffer 3e565000.framebuffer: format=a8r8g8b8, mode=1600x900x32, linelength=6400
[    1.124907] Console: switching to colour frame buffer device 200x56
[    1.131858] simple-framebuffer 3e565000.framebuffer: fb0: simplefb registered!
[    1.142324] NET: Registered protocol family 2
[    1.142541] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.143989] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.144031] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.144133] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.144205] TCP: Hash tables configured (established 8192 bind 8192)
[    1.144355] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.144389] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.144647] NET: Registered protocol family 1
[    1.145376] RPC: Registered named UNIX socket transport module.
[    1.145392] RPC: Registered udp transport module.
[    1.145407] RPC: Registered tcp transport module.
[    1.145422] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.145445] PCI: CLS 0 bytes, default 64
[    1.148555] Initialise system trusted keyrings
[    1.148790] workingset: timestamp_bits=14 max_order=21 bucket_order=7
[    1.157199] zbud: loaded
[    1.159411] FS-Cache: Netfs 'nfs' registered for caching
[    1.160182] NFS: Registering the id_resolver key type
[    1.160219] Key type id_resolver registered
[    1.160235] Key type id_legacy registered
[    1.160375] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.160392] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.161420] Key type asymmetric registered
[    1.161437] Asymmetric key parser 'x509' registered
[    1.161633] bounce: pool size: 64 pages
[    1.161675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.161889] io scheduler mq-deadline registered
[    1.161905] io scheduler kyber registered
[    1.166384] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    1.166417] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    1.166498] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    1.166587] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[    1.226166] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    1.226529] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    1.226550] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.226571] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    1.226661] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    1.226902] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.230432] PCI: bus0: Fast back to back transfers disabled
[    1.230686] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    1.230759] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    1.231017] pci 0000:01:00.0: PME# supported from D0 D3hot
[    1.234462] PCI: bus1: Fast back to back transfers disabled
[    1.234559] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    1.234584] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    1.234628] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.234654] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    1.235053] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[    1.235291] pcieport 0000:00:00.0: PME: Signaling with IRQ 65
[    1.241240] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    1.242151] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[    1.244716] iproc-rng200 fe104000.rng: hwrng registered
[    1.245030] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
[    1.245912] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    1.257962] brd: module loaded
[    1.270116] loop: module loaded
[    1.271857] Loading iSCSI transport class v2.0-870.
[    1.275172] libphy: Fixed MDIO Bus: probed
[    1.276885] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.294125] libphy: bcmgenet MII bus: probed
[    1.374254] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    1.375431] usbcore: registered new interface driver r8152
[    1.375499] usbcore: registered new interface driver lan78xx
[    1.375572] usbcore: registered new interface driver smsc95xx
[    1.421452] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.421493] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    1.424633] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
[    1.425948] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.425967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.425985] usb usb1: Product: xHCI Host Controller
[    1.426002] usb usb1: Manufacturer: Linux 5.10.52-v7l+ xhci-hcd
[    1.426019] usb usb1: SerialNumber: 0000:01:00.0
[    1.426737] hub 1-0:1.0: USB hub found
[    1.426836] hub 1-0:1.0: 1 port detected
[    1.427503] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.427544] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    1.427571] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    1.428067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.428086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.428103] usb usb2: Product: xHCI Host Controller
[    1.428119] usb usb2: Manufacturer: Linux 5.10.52-v7l+ xhci-hcd
[    1.428135] usb usb2: SerialNumber: 0000:01:00.0
[    1.428846] hub 2-0:1.0: USB hub found
[    1.428918] hub 2-0:1.0: 4 ports detected
[    1.430608] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.430937] dwc_otg: FIQ enabled
[    1.430953] dwc_otg: NAK holdoff enabled
[    1.430967] dwc_otg: FIQ split-transaction FSM enabled
[    1.430984] Module dwc_common_port init
[    1.431433] usbcore: registered new interface driver uas
[    1.431552] usbcore: registered new interface driver usb-storage
[    1.431743] mousedev: PS/2 mouse device common for all mice
[    1.433432] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.436919] sdhci: Secure Digital Host Controller Interface driver
[    1.436934] sdhci: Copyright(c) Pierre Ossman
[    1.437658] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    1.438298] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.442396] ledtrig-cpu: registered to indicate activity on CPUs
[    1.442738] hid: raw HID events driver (C) Jiri Kosina
[    1.442937] usbcore: registered new interface driver usbhid
[    1.442952] usbhid: USB HID core driver
[    1.448332] Initializing XFRM netlink socket
[    1.448375] NET: Registered protocol family 17
[    1.448510] Key type dns_resolver registered
[    1.449004] Registering SWP/SWPB emulation handler
[    1.449192] registered taskstats version 1
[    1.449219] Loading compiled-in X.509 certificates
[    1.450078] Key type ._fscrypt registered
[    1.450094] Key type .fscrypt registered
[    1.450109] Key type fscrypt-provisioning registered
[    1.461685] uart-pl011 fe201000.serial: there is not valid maps for state default
[    1.461998] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    1.462073] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[    1.469530] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
[    1.470315] printk: console [ttyS0] disabled
[    1.470448] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 38, base_baud = 62500000) is a 16550
[    1.470645] printk: console [ttyS0] enabled
[    1.471649] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.472693] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    1.472710] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    1.501515] of_cfs_init
[    1.501774] of_cfs_init: OK
[    1.524478] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.526179] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.528118] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.531165] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.532869] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.539278] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    1.539934] Waiting for root device PARTUUID=d9b3f436-02...
[    1.574424] random: fast init done
[    1.600934] mmc1: new high speed SDIO card at address 0001
[    1.675306] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.829571] usb 2-1: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21
[    1.829591] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.829608] usb 2-1: Product: USB3.0 Hub             
[    1.829625] usb 2-1: Manufacturer: VIA Labs, Inc.         
[    1.834012] hub 2-1:1.0: USB hub found
[    1.834546] hub 2-1:1.0: 4 ports detected
[    1.974093] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.156705] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    2.156725] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.156742] usb 1-1: Product: USB2.0 Hub
[    2.158484] hub 1-1:1.0: USB hub found
[    2.158809] hub 1-1:1.0: 4 ports detected
[    2.304512] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    2.336119] usb 2-2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[    2.336139] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    2.336156] usb 2-2: Product: Forty
[    2.336172] usb 2-2: Manufacturer: Argon
[    2.336189] usb 2-2: SerialNumber: 0000000000E3
[    2.359318] scsi host0: uas
[    2.360694] scsi 0:0:0:0: Direct-Access     Argon    Forty            0    PQ: 0 ANSI: 6
[    2.362897] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.363088] sd 0:0:0:0: [sda] Write Protect is off
[    2.363108] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    2.363468] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.364305] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[    2.367656]  sda: sda1 sda2
[    2.370761] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.385929] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.386001] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    2.386548] devtmpfs: mounted
[    2.395546] Freeing unused kernel memory: 2048K
[    2.434315] usb 2-1.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[    2.454410] Run /sbin/init as init process
[    2.454425]   with arguments:
[    2.454439]     /sbin/init
[    2.454454]     splash
[    2.454468]   with environment:
[    2.454482]     HOME=/
[    2.454496]     TERM=linux
[    2.466147] usb 2-1.4: New USB device found, idVendor=03c3, idProduct=294e, bcdDevice= 0.00
[    2.466168] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.466185] usb 2-1.4: Product: ASI294MM Pro
[    2.466202] usb 2-1.4: Manufacturer: ZWO
[    2.564129] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[    2.680894] systemd[1]: System time before build time, advancing clock.
[    2.698227] usb 1-1.1: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21
[    2.698248] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.698265] usb 1-1.1: Product: USB2.0 Hub             
[    2.698282] usb 1-1.1: Manufacturer: VIA Labs, Inc.         
[    2.703783] hub 1-1.1:1.0: USB hub found
[    2.704521] hub 1-1.1:1.0: 4 ports detected
[    2.748252] NET: Registered protocol family 10
[    2.749657] Segment Routing with IPv6
[    2.788238] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.789022] systemd[1]: Detected architecture arm.
[    2.824146] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd
[    2.845498] systemd[1]: Set hostname to <stellarmate>.
[    2.970570] usb 1-1.4: New USB device found, idVendor=148f, idProduct=5572, bcdDevice= 1.01
[    2.970594] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.970612] usb 1-1.4: Product: 802.11 n WLAN
[    2.970629] usb 1-1.4: Manufacturer: Ralink
[    2.970646] usb 1-1.4: SerialNumber: 1.0
[    3.064156] usb 1-1.1.1: new full-speed USB device number 5 using xhci_hcd
[    3.222897] usb 1-1.1.1: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
[    3.222920] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.222938] usb 1-1.1.1: Product: PPBADV revB
[    3.222955] usb 1-1.1.1: Manufacturer: Pegasus Astro
[    3.222972] usb 1-1.1.1: SerialNumber: PPBA63R1WC
[    3.344112] usb 1-1.1.2: new full-speed USB device number 6 using xhci_hcd
[    3.459609] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[    3.460953] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[    3.490934] usb 1-1.1.2: New USB device found, idVendor=067b, idProduct=23d3, bcdDevice= 4.05
[    3.490955] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.490973] usb 1-1.1.2: Product: USB-Serial Controller 
[    3.490990] usb 1-1.1.2: Manufacturer: Prolific Technology Inc. 
[    3.491007] usb 1-1.1.2: SerialNumber: EAAUb19B616
[    3.604170] usb 1-1.1.3: new high-speed USB device number 7 using xhci_hcd
[    3.608044] random: systemd: uninitialized urandom read (16 bytes read)
[    3.618700] random: systemd: uninitialized urandom read (16 bytes read)
[    3.622098] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    3.622367] random: systemd: uninitialized urandom read (16 bytes read)
[    3.622722] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.624089] systemd[1]: Created slice system-getty.slice.
[    3.624840] systemd[1]: Listening on udev Control Socket.
[    3.626046] systemd[1]: Created slice User and Session Slice.
[    3.755012] usb 1-1.1.3: New USB device found, idVendor=03c3, idProduct=290f, bcdDevice= 0.00
[    3.755035] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.755053] usb 1-1.1.3: Product: ASI290MM Mini
[    3.755070] usb 1-1.1.3: Manufacturer: ZWO
[    3.762218] i2c /dev entries driver
[    3.874123] usb 1-1.1.4: new high-speed USB device number 8 using xhci_hcd
[    4.015600] usb 1-1.1.4: New USB device found, idVendor=04b4, idProduct=6572, bcdDevice=32.99
[    4.015622] usb 1-1.1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.015641] usb 1-1.1.4: Product: USB2.0 Hub
[    4.026012] hub 1-1.1.4:1.0: USB hub found
[    4.026379] hub 1-1.1.4:1.0: 4 ports detected
[    4.307038] EXT4-fs (sda2): re-mounted. Opts: (null)
[    4.354251] usb 1-1.1.4.2: new full-speed USB device number 9 using xhci_hcd
[    4.403851] systemd-journald[120]: Received request to flush runtime journal from PID 1
[    4.489967] usb 1-1.1.4.2: New USB device found, idVendor=03c3, idProduct=1f01, bcdDevice= 0.00
[    4.489990] usb 1-1.1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.490008] usb 1-1.1.4.2: Product: ZWO EFW
[    4.490026] usb 1-1.1.4.2: Manufacturer: ZW0
[    4.501290] hid-generic 0003:03C3:1F01.0001: hiddev96,hidraw0: USB HID v1.01 Device [ZW0 ZWO EFW] on usb-0000:01:00.0-1.1.4.2/input0
[    4.617648] usb 1-1.1.4.3: new full-speed USB device number 10 using xhci_hcd
[    4.749745] usb 1-1.1.4.3: New USB device found, idVendor=03c3, idProduct=1f10, bcdDevice= 0.00
[    4.749767] usb 1-1.1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.749785] usb 1-1.1.4.3: Product: ZWO EFF
[    4.749802] usb 1-1.1.4.3: Manufacturer: ZW0
[    4.777180] hid-generic 0003:03C3:1F10.0002: hiddev97,hidraw1: USB HID v1.01 Device [ZW0 ZWO EFF] on usb-0000:01:00.0-1.1.4.3/input0
[    5.234796] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    5.245437] mc: Linux media interface: v0.10
[    5.268063] bcm2835_audio bcm2835_audio: card created with 4 channels
[    5.273845] bcm2835_audio bcm2835_audio: card created with 4 channels
[    5.301848] videodev: Linux video capture interface: v2.00
[    5.326607] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    5.328857] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    5.328883] [vc_sm_connected_init]: start
[    5.329498] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    5.330780] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    5.331078] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    5.355398] [vc_sm_connected_init]: installed successfully
[    5.357562] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.358456] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.359696] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.361549] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    5.365966] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    5.368660] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    5.373374] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    5.373421] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    5.373778] checking generic (3e565000 591000) vs hw (0 ffffffffffffffff)
[    5.373796] fb0: switching to vc4drmfb from simple
[    5.374723] Console: switching to colour dummy device 80x30
[    5.375380] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    5.375792] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    5.376159] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    5.376474] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    5.376503] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    5.376528] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    5.376551] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    5.376573] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    5.376777] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    5.393904] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[    5.404991] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[    5.444906] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[    5.445496] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[    5.446011] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[    5.446546] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[    5.465546] vc4-drm gpu: [drm] HDMI-A-1: EDID is invalid:
[    5.465571]     [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    5.465587]     [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    5.465602]     [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    5.465617]     [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    5.465632]     [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    5.465647]     [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    5.465662]     [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    5.465677]     [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    5.612197] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.613367] Console: switching to colour frame buffer device 200x56
[    5.639326] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[    5.746007] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.766215] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[    5.864406] brcmfmac: F1 signature read @0x18000000=0x15264345
[    5.884476] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.888006] usbcore: registered new interface driver brcmfmac
[    6.016452] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    6.016501] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    6.023503] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    6.023577] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    6.139941] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    6.140057] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    6.149926] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan  4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
[    6.393786] usbcore: registered new interface driver usbserial_generic
[    6.393893] usbserial: USB Serial support registered for generic
[    6.402978] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.434363] usbcore: registered new interface driver ftdi_sio
[    6.434446] usbserial: USB Serial support registered for FTDI USB Serial Device
[    6.434866] ftdi_sio 1-1.1.1:1.0: FTDI USB Serial Device converter detected
[    6.435036] usb 1-1.1.1: Detected FT-X
[    6.450692] usb 1-1.1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[    6.459770] usbcore: registered new interface driver pl2303
[    6.459870] usbserial: USB Serial support registered for pl2303
[    6.460048] pl2303 1-1.1.2:1.0: pl2303 converter detected
[    6.460966] usb 1-1.1.2: pl2303 converter now attached to ttyUSB1
[    6.567745] usb 1-1.4: reset high-speed USB device number 4 using xhci_hcd
[    6.704946] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
[    6.758964] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[    6.759472] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[    6.762172] usbcore: registered new interface driver rt2800usb
[    7.409909] rtc-ds1307: probe of 1-0068 failed with error -121
[    9.315996] Process accounting resumed
[    9.428264] uart-pl011 fe201000.serial: no DMA platform data
[    9.477799] random: crng init done
[    9.477830] random: 7 urandom warning(s) missed due to ratelimiting
[    9.564203] Adding 102396k swap on /var/swap.  Priority:-2 extents:915 across:229304k SSFS
[   10.312959] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[   10.317035] bcmgenet fd580000.ethernet eth0: Link is Down
[   10.376430] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[   10.392187] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   10.392725] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[   11.450004] broken atomic modeset userspace detected, disabling atomic
[   13.479717] fuse: init (API version 7.32)
[   16.140306] Bluetooth: Core ver 2.22
[   16.140374] NET: Registered protocol family 31
[   16.140382] Bluetooth: HCI device and connection manager initialized
[   16.140398] Bluetooth: HCI socket layer initialized
[   16.140408] Bluetooth: L2CAP socket layer initialized
[   16.140436] Bluetooth: SCO socket layer initialized
[   16.157741] Bluetooth: HCI UART driver ver 2.3
[   16.157752] Bluetooth: HCI UART protocol H4 registered
[   16.157817] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   16.157995] Bluetooth: HCI UART protocol Broadcom registered
[   16.537332] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.537358] Bluetooth: BNEP filters: protocol multicast
[   16.537424] Bluetooth: BNEP socket layer initialized
[   16.614292] Bluetooth: RFCOMM TTY layer initialized
[   16.614320] Bluetooth: RFCOMM socket layer initialized
[   16.614349] Bluetooth: RFCOMM ver 1.11
[   20.510341] wlan1: authenticate with 04:18:d6:e2:e3:ac
[   20.569017] wlan1: send auth to 04:18:d6:e2:e3:ac (try 1/3)
[   20.571626] wlan1: authenticated
[   20.574101] wlan1: associate with 04:18:d6:e2:e3:ac (try 1/3)
[   20.578736] wlan1: RX AssocResp from 04:18:d6:e2:e3:ac (capab=0x511 status=0 aid=3)
[   20.588748] wlan1: associated
[   20.660635] cryptd: max_cpu_qlen set to 1000
[   20.717533] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   35.432688] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   63.581426] hid-generic 0003:03C3:1F10.0003: hiddev96,hidraw0: USB HID v1.01 Device [ZW0 ZWO EFF] on usb-0000:01:00.0-1.1.4.3/input0
[   63.584466] hid-generic 0003:03C3:1F01.0004: hiddev97,hidraw1: USB HID v1.01 Device [ZW0 ZWO EFW] on usb-0000:01:00.0-1.1.4.2/input0
[  288.517561] v3d fec00000.v3d: MMU error from client L2T (0) at 0x2be1000, pte invalid
[  293.056298] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[  309.836686] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[  320.886882] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[  348.106981] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  351.237168] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  354.517813] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  357.867274] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  361.117229] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  364.217353] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  367.697233] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  370.817352] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  373.917415] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  377.267405] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  380.417419] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  383.637595] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  386.817567] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  391.067515] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  395.337562] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  399.417544] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  403.667621] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  407.917654] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  412.127568] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  416.327638] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  420.427644] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  424.547496] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  428.617641] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  432.767815] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  437.027687] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  441.327617] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  445.537637] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  449.717742] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  453.947723] usb 1-1.1.3: reset high-speed USB device number 7 using xhci_hcd
[  464.997912] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[  467.945755] indi_asi_ccd invoked oom-killer: gfp_mask=0x40cc0(GFP_KERNEL|__GFP_COMP), order=2, oom_score_adj=0
[  467.945775] CPU: 3 PID: 2560 Comm: indi_asi_ccd Tainted: G         C        5.10.52-v7l+ #1440
[  467.945780] Hardware name: BCM2711
[  467.945785] Backtrace: 
[  467.945808] [<c0b826d4>] (dump_backtrace) from [<c0b82a68>] (show_stack+0x20/0x24)
[  467.945815]  r7:ffffffff r6:00000000 r5:60000013 r4:c12e6b7c
[  467.945824] [<c0b82a48>] (show_stack) from [<c0b86e54>] (dump_stack+0xcc/0xf8)
[  467.945832] [<c0b86d88>] (dump_stack) from [<c0b850e4>] (dump_header+0x64/0x208)
[  467.945838]  r10:c12051cc r9:00040cc0 r8:00000002 r7:c0e3b8c8 r6:ef60d800 r5:c454ae80
[  467.945844]  r4:c28cbcd0 r3:beb93873
[  467.945857] [<c0b85080>] (dump_header) from [<c03b8800>] (oom_kill_process+0x1b4/0x1c0)
[  467.945862]  r7:c0e3b8c8 r6:c28cbcd0 r5:c454b400 r4:c454ae80
[  467.945870] [<c03b864c>] (oom_kill_process) from [<c03b9378>] (out_of_memory+0x2b8/0x390)
[  467.945875]  r7:c12085c0 r6:c1205048 r5:c454ae80 r4:c28cbcd0
[  467.945886] [<c03b90c0>] (out_of_memory) from [<c040ca08>] (__alloc_pages_nodemask+0x7ec/0x1184)
[  467.945891]  r7:c1337ed0 r6:00001000 r5:0001fea7 r4:00000000
[  467.945899] [<c040c21c>] (__alloc_pages_nodemask) from [<c03e0218>] (kmalloc_order+0x4c/0x124)
[  467.945905]  r10:00000000 r9:00004000 r8:00000002 r7:c042390c r6:00000cc0 r5:00004000
[  467.945909]  r4:00000001
[  467.945915] [<c03e01cc>] (kmalloc_order) from [<c03e031c>] (kmalloc_order_trace+0x2c/0xdc)
[  467.945921]  r9:00004000 r8:00000002 r7:c042390c r6:00000cc0 r5:00004000 r4:00000001
[  467.945932] [<c03e02f0>] (kmalloc_order_trace) from [<c042390c>] (__kmalloc+0x534/0x5a0)
[  467.945938]  r10:00000000 r9:00004000 r8:00000cc0 r7:0000002f r6:00044000 r5:00004000
[  467.945943]  r4:00000001
[  467.946000] [<c04233d8>] (__kmalloc) from [<c0906360>] (proc_do_submiturb+0x564/0xfe4)
[  467.946007]  r10:00000000 r9:cabc0000 r8:c55f5f80 r7:0000002f r6:00044000 r5:00004000
[  467.946011]  r4:00000001
[  467.946019] [<c0905dfc>] (proc_do_submiturb) from [<c09075c8>] (usbdev_ioctl+0x7e8/0x1d24)
[  467.946025]  r10:c2368ce8 r9:c22ef8bc r8:802c550a r7:c2cb1a80 r6:c28cbeb8 r5:c1205048
[  467.946029]  r4:c5456780
[  467.946039] [<c0906de0>] (usbdev_ioctl) from [<c0453ec4>] (sys_ioctl+0x1d4/0x8ec)
[  467.946044]  r10:00000009 r9:c28ca000 r8:00000000 r7:c2cb1a80 r6:c2cb1a81 r5:c1205048
[  467.946048]  r4:802c550a
[  467.946057] [<c0453cf0>] (sys_ioctl) from [<c0200040>] (ret_fast_syscall+0x0/0x28)
[  467.946061] Exception stack(0xc28cbfa8 to 0xc28cbff0)
[  467.946068] bfa0:                   8af03d30 8af024e0 00000009 802c550a 8af03d30 021d2c38
[  467.946074] bfc0: 8af03d30 8af024e0 00000000 00000036 00000001 00000000 00000000 00000000
[  467.946078] bfe0: b67a00b4 8bafe90c b6787608 b649b51c
[  467.946084]  r10:00000036 r9:c28ca000 r8:c0200204 r7:00000036 r6:00000000 r5:8af024e0
[  467.946089]  r4:8af03d30
[  467.946094] Mem-Info:
[  467.946107] active_anon:263 inactive_anon:172245 isolated_anon:0
                active_file:11824 inactive_file:115660 isolated_file:5
                unevictable:21034 dirty:23 writeback:0
                slab_reclaimable:4149 slab_unreclaimable:16461
                mapped:62708 shmem:28459 pagetables:2204 bounce:0
                free:1623782 free_pcp:503 free_cma:126648
[  467.946120] Node 0 active_anon:1052kB inactive_anon:688980kB active_file:47296kB inactive_file:462640kB unevictable:84136kB isolated(anon):0kB isolated(file):20kB mapped:250832kB dirty:92kB writeback:0kB shmem:113836kB writeback_tmp:0kB kernel_stack:2432kB all_unreclaimable? yes
[  467.946132] DMA free:522600kB min:16384kB low:20480kB high:24576kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:180kB inactive_file:0kB unevictable:0kB writepending:64kB present:785408kB managed:629692kB mlocked:0kB pagetables:724kB bounce:0kB free_pcp:44kB local_pcp:0kB free_cma:506592kB
[  467.946138] lowmem_reserve[]: 0 0 7104 7104
[  467.946175] HighMem free:5972528kB min:512kB low:47828kB high:95144kB reserved_highatomic:0KB active_anon:1052kB inactive_anon:688980kB active_file:47312kB inactive_file:462464kB unevictable:84036kB writepending:28kB present:7274496kB managed:7274496kB mlocked:6296kB pagetables:8092kB bounce:0kB free_pcp:1968kB local_pcp:0kB free_cma:0kB
[  467.946181] lowmem_reserve[]: 0 0 0 0
[  467.946214] DMA: 810*4kB (UMEC) 680*8kB (UEC) 168*16kB (UMEC) 62*32kB (UEC) 20*64kB (UMEC) 10*128kB (UMEC) 10*256kB (MEC) 3*512kB (MC) 5*1024kB (C) 3*2048kB (C) 120*4096kB (C) = 522792kB
[  467.946345] HighMem: 1155*4kB (UM) 604*8kB (UM) 546*16kB (UM) 504*32kB (UM) 517*64kB (UM) 406*128kB (UM) 237*256kB (UM) 25*512kB (UM) 14*1024kB (UM) 15*2048kB (UM) 1400*4096kB (UM) = 5972300kB
[  467.946475] 153476 total pagecache pages
[  467.946483] 0 pages in swap cache
[  467.946490] Swap cache stats: add 0, delete 0, find 0/0
[  467.946496] Free swap  = 102396kB
[  467.946501] Total swap = 102396kB
[  467.946508] 2014976 pages RAM
[  467.946514] 1818624 pages HighMem/MovableOnly
[  467.946520] 38929 pages reserved
[  467.946526] 131072 pages cma reserved
[  467.946533] Tasks state (memory values in pages):
[  467.946539] [  pid  ]   uid  tgid total_vm      rss pgtables_bytes swapents oom_score_adj name
[  467.946565] [    120]     0   120     5399     2301   229376        0             0 systemd-journal
[  467.946575] [    151]     0   151     4607     1004    45056        0         -1000 systemd-udevd
[  467.946588] [    433]   102   433     4791     1955    61440        0             0 systemd-resolve
[  467.946599] [    434]   100   434     5604      752    61440        0             0 systemd-timesyn
[  467.946607] [    450]     0   450    16971     2710    98304        0             0 udisksd
[  467.946616] [    451] 65534   451     1080      508    36864        0             0 thd
[  467.946625] [    457]     0   457     3288     1470    53248        0             0 systemd-logind
[  467.946633] [    460]     0   460    12408     7188   110592        0             0 python3
[  467.946641] [    464]     0   464     2945     1169    49152        0             0 alsactl
[  467.946651] [    467]     0   467     6378      692    49152        0             0 rsyslogd
[  467.946659] [    473]   104   473     1865     1036    36864        0          -900 dbus-daemon
[  467.946668] [    480]     0   480     2648     1716    49152        0             0 wpa_supplicant
[  467.946676] [    492]     0   492     2399      379    45056        0             0 pigpiod
[  467.946684] [    511]   111   511     1561      595    36864        0             0 gpsd
[  467.946692] [    517]   108   517     1471      767    36864        0             0 avahi-daemon
[  467.946700] [    522]     0   522     1994      579    45056        0             0 cron
[  467.946708] [    537]   108   537     1442       64    32768        0             0 avahi-daemon
[  467.946716] [    538]     0   538     9333     1917    73728        0             0 cupsd
[  467.946725] [    540]     0   540      466       15    28672        0             0 atopacctd
[  467.946733] [    555]     0   555     6914       20    40960        0             0 rngd
[  467.946742] [    566]     7   566     3458     1163    49152        0             0 dbus
[  467.946750] [    567]     7   567     3458     1188    53248        0             0 dbus
[  467.946758] [    568]     7   568     3458     1149    49152        0             0 dbus
[  467.946767] [    569]     7   569     3458     1192    53248        0             0 dbus
[  467.946776] [    571]     0   571     9885     1900    65536        0             0 polkitd
[  467.946784] [    574]     0   574     1838     1560    40960        0             0 atop
[  467.946792] [    577]     0   577    18773     3538   110592        0             0 NetworkManager
[  467.946800] [    593]     0   593    10216     2320    81920        0             0 cups-browsed
[  467.946808] [    666]     0   666    12089     4179   126976        0             0 smbd
[  467.946817] [    667]     0   667     2682     1354    49152        0         -1000 sshd
[  467.946827] [    686]     0   686    11681     1494    65536        0             0 lightdm
[  467.946834] [    756]     0   756    41582    21395   335872        0             0 Xorg
[  467.946842] [    757]     0   757     1654      416    36864        0             0 agetty
[  467.946850] [    759]     0   759     1431      724    32768        0             0 login
[  467.946858] [    935]     0   935    11356     1340   102400        0             0 smbd-notifyd
[  467.946866] [    936]     0   936    11354     1050   102400        0             0 cleanupd
[  467.946874] [    937]   115   937     3592      545    49152        0             0 exim4
[  467.946883] [    940]     0   940    12115     1590   110592        0             0 lpqd
[  467.946891] [    955]     0   955     7503     1542    61440        0             0 lightdm
[  467.946899] [    960]  1000   960     3679     1915    53248        0             0 systemd
[  467.946907] [    961]  1000   961     4270      477    57344        0             0 (sd-pam)
[  467.946915] [    972]  1000   972    13615     2940    98304        0             0 lxsession
[  467.946923] [    980]  1000   980     1661      917    40960        0             0 dbus-daemon
[  467.946932] [   1005]  1000  1005     1130       72    32768        0             0 ssh-agent
[  467.946940] [   1016]  1000  1016    10853     1571    69632        0             0 gvfsd
[  467.946949] [   1021]  1000  1021    13628     1314    81920        0             0 gvfsd-fuse
[  467.946958] [   1026]  1000  1026    15711     3816    94208        0             0 openbox
[  467.946968] [   1027]  1000  1027    11784     2710    94208        0             0 lxpolkit
[  467.946975] [   1034]  1000  1034    38105     7255   192512        0             0 lxpanel
[  467.946985] [   1038]  1000  1038    18132     5309   122880        0             0 pcmanfm
[  467.946994] [   1046]  1000  1046     1130       72    32768        0             0 ssh-agent
[  467.947002] [   1051]  1000  1051    46105    16197   315392        0             0 blueman-applet
[  467.947010] [   1057]  1000  1057    10113     1189    69632        0             0 agent
[  467.947018] [   1072]  1000  1072    11581     1474    69632        0             0 kstars_wrapper
[  467.947027] [   1083]  1000  1083    42543    12764   294912        0             0 nm-applet
[  467.947035] [   1091]  1000  1091     1218      254    36864        0             0 xcompmgr
[  467.947044] [   1093]  1000  1093   188660    87543  1052672        0             0 kstars
[  467.947052] [   1097]  1000  1097    12945     7475   131072        0             0 applet.py
[  467.947060] [   1108]  1000  1108    26400     2239    86016        0             0 pulseaudio
[  467.947068] [   1109]  1000  1109     2091      891    40960        0             0 bash
[  467.947076] [   1112]   113  1112     5797      556    40960        0             0 rtkit-daemon
[  467.947085] [   1132]  1000  1132     6611     1269    45056        0             0 menu-cached
[  467.947093] [   1136]  1000  1136    19837     2519    94208        0             0 gvfs-udisks2-vo
[  467.947101] [   1140]  1000  1140    10026     1104    73728        0             0 gvfs-goa-volume
[  467.947109] [   1144]  1000  1144    14007     1814    94208        0             0 gvfs-afc-volume
[  467.947117] [   1149]  1000  1149    10032     1149    69632        0             0 gvfs-mtp-volume
[  467.947125] [   1185]     0  1185      535       32    28672        0             0 hciattach
[  467.947133] [   1189]  1000  1189    13215     1629    77824        0             0 gvfsd-trash
[  467.947141] [   1196]     0  1196     7057     4542    77824        0             0 python3
[  467.947149] [   1206]     0  1206    10207     5933   106496        0             0 python3
[  467.947157] [   1213]  1000  1213     9023     6497    94208        0             0 python3
[  467.947165] [   1216]  1000  1216    49254    18185   675840        0             0 ekoslive
[  467.947173] [   1223]     0  1223     2485     1103    40960        0             0 bluetoothd
[  467.947182] [   1293]  1000  1293    10346     1467    61440        0             0 obexd
[  467.947190] [   1333]     0  1333     1979     1268    40960        0             0 dhclient
[  467.947199] [   1390]     7  1390     3458     1190    53248        0             0 dbus
[  467.947207] [   1397]   117  1397    11939     2645    81920        0             0 colord
[  467.947215] [   1412]  1000  1412    10895     1700    65536        0             0 gnome-keyring-d
[  467.947310] [   1467] 65534  1467     2770      808    49152        0             0 dnsmasq
[  467.947321] [   1555]  1000  1555      690      535    32768        0             0 indiserver
[  467.947329] [   1556]  1000  1556     8269     2405    90112        0             0 indi_eqmod_tele
[  467.947337] [   1558]  1000  1558   217151    47908   557056        0             0 indi_asi_ccd
[  467.947347] [   1559]  1000  1559    13374     2541   102400        0             0 indi_asi_wheel
[  467.947357] [   1560]  1000  1560    13375     2522   102400        0             0 indi_asi_focuse
[  467.947365] [   1561]  1000  1561     7588     1805    86016        0             0 indi_pegasus_pp
[  467.947374] [   1910]     0  1910    12200     4955   102400        0             0 x11vnc
[  467.947385] [   1911]     0  1911     1952      721    40960        0             0 bash
[  467.947401] [   1918]     0  1918    10584     5596    98304        0             0 python3
[  467.947412] [   2564]  1000  2564    38105     1504   184320        0             0 lxpanel
[  467.947423] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/,task=kstars,pid=1093,uid=1000
[  467.947550] Out of memory: Killed process 1093 (kstars) total-vm:754640kB, anon-rss:246724kB, file-rss:87668kB, shmem-rss:15780kB, UID:1000 pgtables:1028kB oom_score_adj:0
[  472.886852] oom_reaper: reaped process 1093 (kstars), now anon-rss:16kB, file-rss:64kB, shmem-rss:15800kB
[  472.888430] kworker/u8:3 invoked oom-killer: gfp_mask=0xc2cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_COMP|__GFP_NOMEMALLOC), order=1, oom_score_adj=0
[  472.888452] CPU: 2 PID: 981 Comm: kworker/u8:3 Tainted: G         C        5.10.52-v7l+ #1440
[  472.888458] Hardware name: BCM2711
[  472.888499] Workqueue: phy1 rt2x00usb_work_rxdone [rt2x00usb]
[  472.888509] Backtrace: 
[  472.888533] [<c0b826d4>] (dump_backtrace) from [<c0b82a68>] (show_stack+0x20/0x24)
[  472.888540]  r7:ffffffff r6:00000000 r5:60000013 r4:c12e6b7c
[  472.888552] [<c0b82a48>] (show_stack) from [<c0b86e54>] (dump_stack+0xcc/0xf8)
[  472.888559] [<c0b86d88>] (dump_stack) from [<c0b850e4>] (dump_header+0x64/0x208)
[  472.888566]  r10:c12051cc r9:000c2cc0 r8:00000001 r7:c0e3b8c8 r6:c4704000 r5:c6021f00
[  472.888570]  r4:c47afc00 r3:beb93873
[  472.888582] [<c0b85080>] (dump_header) from [<c03b8800>] (oom_kill_process+0x1b4/0x1c0)
[  472.888587]  r7:c0e3b8c8 r6:c47afc00 r5:c6022480 r4:c6021f00
[  472.888595] [<c03b864c>] (oom_kill_process) from [<c03b9378>] (out_of_memory+0x2b8/0x390)
[  472.888600]  r7:c12085c0 r6:c1205048 r5:c6021f00 r4:c47afc00
[  472.888608] [<c03b90c0>] (out_of_memory) from [<c040ca08>] (__alloc_pages_nodemask+0x7ec/0x1184)
[  472.888614]  r7:c1337ed0 r6:00001000 r5:0001ff0b r4:00000000
[  472.888622] [<c040c21c>] (__alloc_pages_nodemask) from [<c041f878>] (allocate_slab+0x290/0x334)
[  472.888629]  r10:ffffffff r9:00000003 r8:00000000 r7:00000400 r6:00010001 r5:c1801840
[  472.888633]  r4:00000001
[  472.888641] [<c041f5e8>] (allocate_slab) from [<c0422b78>] (___slab_alloc.constprop.28+0x32c/0x56c)
[  472.888646]  r10:efdcf6f0 r9:00001080 r8:c1801840 r7:00000000 r6:00082cc0 r5:c1800dc0
[  472.888651]  r4:00000000 r3:003beee0
[  472.888657] [<c042284c>] (___slab_alloc.constprop.28) from [<c0422e28>] (__slab_alloc.constprop.27+0x70/0x80)
[  472.888663]  r10:000030ae r9:00001080 r8:efdcf6f0 r7:c09feea8 r6:00082cc0 r5:c1801840
[  472.888667]  r4:60000013
[  472.888673] [<c0422db8>] (__slab_alloc.constprop.27) from [<c042338c>] (__kmalloc_track_caller+0x554/0x5a0)
[  472.888679]  r8:00082cc0 r7:c1205850 r6:00000000 r5:00000000 r4:c1801840
[  472.888689] [<c0422e38>] (__kmalloc_track_caller) from [<c09fedec>] (__kmalloc_reserve.constprop.42+0x30/0x74)
[  472.888695]  r10:00000000 r9:00001080 r8:c1a1d180 r7:c09feea8 r6:c1205048 r5:00000cc0
[  472.888700]  r4:c47afdab
[  472.888706] [<c09fedbc>] (__kmalloc_reserve.constprop.42) from [<c09feea8>] (__alloc_skb+0x78/0x160)
[  472.888712]  r9:00000cc0 r8:c1a1d180 r7:00000000 r6:c1205048 r5:00000f70 r4:c2807a80
[  472.888719] [<c09fee30>] (__alloc_skb) from [<c0a01eb0>] (__netdev_alloc_skb+0x50/0x188)
[  472.888725]  r10:00000000 r9:00000000 r8:00000100 r7:0000000c r6:c36f57a0 r5:00000000
[  472.888729]  r4:c3ef68a0
[  472.888748] [<c0a01e60>] (__netdev_alloc_skb) from [<bf2e03dc>] (rt2x00queue_alloc_rxskb+0x5c/0x19c [rt2x00lib])
[  472.888753]  r7:0000000c r6:c36f57a0 r5:00000f1c r4:c3ef68a0
[  472.888776] [<bf2e0380>] (rt2x00queue_alloc_rxskb [rt2x00lib]) from [<bf2dc7f4>] (rt2x00lib_rxdone+0x60/0x634 [rt2x00lib])
[  472.888781]  r7:00000000 r6:c1205048 r5:c36f57a0 r4:c3ef68a0
[  472.888799] [<bf2dc794>] (rt2x00lib_rxdone [rt2x00lib]) from [<bf248714>] (rt2x00usb_work_rxdone+0x60/0xa0 [rt2x00usb])
[  472.888804]  r10:00000000 r9:00000000 r8:00000100 r7:c22d8400 r6:c1205048 r5:c47afeb4
[  472.888809]  r4:c36f5dc8
[  472.888820] [<bf2486b4>] (rt2x00usb_work_rxdone [rt2x00usb]) from [<c023dbb0>] (process_one_work+0x250/0x5a0)
[  472.888825]  r6:c180e400 r5:c4653980 r4:c36f5dc8
[  472.888833] [<c023d960>] (process_one_work) from [<c023df60>] (worker_thread+0x60/0x5c4)
[  472.888839]  r10:c180e400 r9:c1203d00 r8:c180e418 r7:00000088 r6:c180e400 r5:c4653994
[  472.888843]  r4:c4653980
[  472.888850] [<c023df00>] (worker_thread) from [<c02459f8>] (kthread+0x170/0x174)
[  472.888856]  r10:c1911e74 r9:c4653980 r8:c023df00 r7:c47ae000 r6:00000000 r5:c46f0d80
[  472.888861]  r4:c52a14c0
[  472.888869] [<c0245888>] (kthread) from [<c02000ec>] (ret_from_fork+0x14/0x28)
[  472.888873] Exception stack(0xc47affb0 to 0xc47afff8)
[  472.888878] ffa0:                                     00000000 00000000 00000000 00000000
[  472.888884] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  472.888889] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  472.888895]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0245888
[  472.888899]  r4:c46f0d80
[  472.888904] Mem-Info:
[  472.888917] active_anon:263 inactive_anon:110591 isolated_anon:0
                active_file:12857 inactive_file:114647 isolated_file:32
                unevictable:20758 dirty:0 writeback:0
                slab_reclaimable:4118 slab_unreclaimable:16493
                mapped:51397 shmem:28183 pagetables:2248 bounce:0
                free:1685497 free_pcp:766 free_cma:126730
[  472.888928] Node 0 active_anon:1052kB inactive_anon:442364kB active_file:51428kB inactive_file:458588kB unevictable:83032kB isolated(anon):0kB isolated(file):128kB mapped:205588kB dirty:0kB writeback:0kB shmem:112732kB writeback_tmp:0kB kernel_stack:2304kB all_unreclaimable? yes
[  472.888940] DMA free:523088kB min:16384kB low:20480kB high:24576kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:212kB inactive_file:0kB unevictable:0kB writepending:0kB present:785408kB managed:629692kB mlocked:0kB pagetables:732kB bounce:0kB free_pcp:40kB local_pcp:0kB free_cma:506920kB
[  472.888946] lowmem_reserve[]: 0 0 7104 7104
[  472.888983] HighMem free:6218900kB min:512kB low:47828kB high:95144kB reserved_highatomic:0KB active_anon:1052kB inactive_anon:442364kB active_file:51268kB inactive_file:458564kB unevictable:83032kB writepending:0kB present:7274496kB managed:7274496kB mlocked:6296kB pagetables:8260kB bounce:0kB free_pcp:3024kB local_pcp:1648kB free_cma:0kB
[  472.888989] lowmem_reserve[]: 0 0 0 0
[  472.889021] DMA: 790*4kB (UMEC) 672*8kB (UEC) 174*16kB (UMEC) 69*32kB (UEC) 19*64kB (UMEC) 9*128kB (UMEC) 11*256kB (MEC) 3*512kB (MC) 5*1024kB (C) 3*2048kB (C) 120*4096kB (C) = 523032kB
[  472.889152] HighMem: 3114*4kB (UM) 1418*8kB (UM) 880*16kB (UM) 553*32kB (UM) 398*64kB (UM) 276*128kB (UM) 146*256kB (UM) 104*512kB (UM) 67*1024kB (UM) 44*2048kB (UM) 1429*4096kB (UM) = 6218904kB
[  472.889284] 153224 total pagecache pages
[  472.889296] 0 pages in swap cache
[  472.889303] Swap cache stats: add 0, delete 0, find 0/0
[  472.889309] Free swap  = 102396kB
[  472.889315] Total swap = 102396kB
[  472.889324] 2014976 pages RAM
[  472.889329] 1818624 pages HighMem/MovableOnly
[  472.889335] 38929 pages reserved
[  472.889342] 131072 pages cma reserved
[  472.889348] Tasks state (memory values in pages):
[  472.889354] [  pid  ]   uid  tgid total_vm      rss pgtables_bytes swapents oom_score_adj name
[  472.889388] [    120]     0   120     5399     2301   233472        0             0 systemd-journal
[  472.889400] [    151]     0   151     4607     1004    45056        0         -1000 systemd-udevd
[  472.889415] [    433]   102   433     4791     1955    61440        0             0 systemd-resolve
[  472.889425] [    434]   100   434     5604      752    61440        0             0 systemd-timesyn
[  472.889435] [    450]     0   450    16971     2710    98304        0             0 udisksd
[  472.889444] [    451] 65534   451     1080      508    36864        0             0 thd
[  472.889454] [    457]     0   457     3288     1470    53248        0             0 systemd-logind
[  472.889463] [    460]     0   460    12408     7188   110592        0             0 python3
[  472.889472] [    464]     0   464     2945     1169    49152        0             0 alsactl
[  472.889481] [    467]     0   467     6378      757    49152        0             0 rsyslogd
[  472.889490] [    473]   104   473     1865     1036    36864        0          -900 dbus-daemon
[  47

Hank replied to the topic 'ASI294MM Pro INDI Drivers' in the forum. 6 months ago

Florent - yes 1x1 binning works very well (I use it exclusively).

Read More...

Hank replied to the topic 'ASI294MM Pro INDI Drivers' in the forum. 6 months ago

Hello JCastro - this sounds familiar to my early days with Astroberry. For me, it turned out to be a combination of a known hardware conflict between the USB3 chip and the 2.4GHz radio for wifi on my rpi4 (I know you're rpi3) and also that I was not using a decent powered USB hub (I had plugged everything into my 4 ports on the rpi).

Have you turned on your debugging logs in EKOS? The devs in this forum are quite good at reading these and discovering configuration conflicts or bugs.

Also you could look through your system logs to see if there are excessive USB resets or conflicts/timeouts. From a command prompt you could type "sudo dmesg | grep -i usb" (the vertical line is a pipe symbol usually shift + \ it's not the letter "i")

Read More...

Hank replied to the topic 'ASI294MM Pro INDI Drivers' in the forum. 6 months ago

apologies - I meant "sudo lspci -v"

that should show you what is connected directly to your rpi4. Are either of you using a powered USB hub in your setup? How is the camera connected to your pi? Are you even using a rpi?

Read More...

Hank replied to the topic 'ASI294MM Pro INDI Drivers' in the forum. 6 months ago

Hi Claude - are you able to see the devices on the astroberry? Are you plugging it in directly or into a powered hub/astropowerbox? If you open a terminal and type "sudo lspci -t" you should be able to see if it's recognized by your computer. If you are running astroberry on a rpi4, try plugging it into the blue tabbed USB port (USB3).

Read More...