Thanks for posting your issue resolution. I know that the Pegasus Astro Powerbox software lets you regulate the voltage to your individual outputs including the pi. But this is good to know.
Read More...
The original post mentioned he is having issue with all of his USB devices so I was not singling out the EQMOD driver per say. As you say there could be an underlying issue with the eqmod driver and/or a conflict between eqmod and other device drivers running on your indi server. I read through your thread on not being able to connect up to the eq8 mount. You might try isolating drivers in your setup to see if there is some kind of conflict between them. I hope that you can make some headway in troubleshooting your eqmod issues. But it seems that you are on the right track in your other thread. Best Regards
Read More...
Remco for what it is worth I am able to connect all my ASI cameras and the EQMOD mount including my ZWO EAF's with Stellarmate 1.5.9. I am running kstars 3.5.4. I am seeing on occasion that the eqmod driver is completely dropped from the indi control panel but only after I've been connected, disconnect and then try to reconnect without shutting down and going back into kstars. In fact I've had to restart the driver completely in the stellarmate web manager to be able to connect again. Seems like the driver may be crashing and a restart of eqmod on the system is the only thing that solves it. If you have a direct usb connection to your mount, and your using an AZEQ5 or EQ6R Mounts, make sure to set the baud rate to 115200. I would try to update to the latest kstars, and if that does not work for you then maybe look at a fresh install by recreating your media from balena etcher. Best of luck but you can rest assured that it is not a widely known hardware compatability issue. Most likely something is not quite right with the installation. Here is my connect output on the Ekos console:
2021-07-18T13:39:22 ZWO CCD ASI2600MC Pro is online.2021-07-18T13:39:22 Guider port from ZWO CCD ASI120MM Mini is ready.2021-07-18T13:39:22 ZWO CCD ASI120MM Mini is online.2021-07-18T13:39:21 ASI EAF focuser is online.
2021-07-18T13:39:21 Guider port from EQMod Mount is ready.2021-07-18T13:39:21 EQMod Mount is online.2021-07-18T13:39:21 EQMod Mount is online.2021-07-18T13:39:21 Remote devices established.2021-07-18T13:39:20 EQMod Mount is online.2021-07-18T13:39:20 INDI services started. Connection to remote INDI server is successful. Waiting for devices...2021-07-18T13:39:20 Connecting to remote INDI server at 192.168.1.93 on port 7,624 ...
Read More...