Thank for your response.
I made a migration of windows beetwen two disk with DiskGenius.
Thank for your help
Then I install Stallarmate on the primary hadr disk
But, when I use Stellarmate, I'm in the nature. And I Haven't screen to choice the first boot on windows or Stellarmate.
Do you have an idea to choise windows or stellarmate ?
Sorry, I don't know if it is possible to install AstroBerry on a minipc.
But please, could you send me how do you migrate windows on your NVMe drive ?
Today I updated Kstars/Ekos/Indi. Now I will use v3.5.9 of this software solution.
I made a test last hour. I ran a sequence with 700 files (without the TS "Append Time stamp to the prefix"). But I had only 494 image saved. So on 3.5.9 version, we have yet this problem.
I use Astroberry Server. I updated it. But it's only 3.5.9 version. Not 3.6.0 version yet. May be later...
You can download it with the link in the first message of this topic.
If you have a problem tell me it and I send you just the log file.
I will try the last version. May be next week, or next one.
I will comeback here to tell you if the problem is ok, or not.
Sorrry for my latet reply.
I use the v3.5.8 version of Kstars/EKOS.
I didn't found the version of Indi.
I hope this information will be useful.
Thank you very much.
This is the right solution.
I tested it last night and it worked well.
I would like to have your opinion ona problem I had last week.
I use astroberry (Kstars/Ekos/Indi) on a Raspberry PI 4
I wanted to do a session of EKOS with 540x light(10s) 100x dark(10s), 60x light(120s) and 30x(120s) dark.
The job was done.
But written files didn't match the sequence. I explain.
On the micro SD Card I have only 478 images (10s), only one image (120s), only one dark (10s) and only one dark (120s) !!
I don't understand why I don't have all files written on the micro SD card.
Since the 478 image, EKOS saves following images with the same name. And for following sequences it use the same name to different step of the sequence. Ex: to the sequence of 60x light, all the saved files had the same name "Light-120s-001.fit".
If you want, I made a transfert wih some screenshots, the log file and the analyze file: Exemple File: we.tl/t-kbrWAjWFQU
I hope my explaination is understantable.
Have you ever encountered the same problem ?
Do you have any idea to the reason of this problem ?
Do you know il is possible to use a camera Ace640 or Ace1600 on Indi on a Raspberry PI 4 ??
I'm a newbie. But I can use a camera basler. I would like to know if someone had used it yet ?